Woven wire fencing price is driven by fence length, mesh size, height, and installation effort. This article breaks down typical cost ranges in USD, plus per-foot and per-panel rates to help buyers budget accurately for a woven wire fence project.
Assumptions: Midwest or Southeast labor rates, standard galvanized mesh, typical 4-6-foot height, and ground-level installation with standard access.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Fence length (per foot) | $1.75 | $2.50 | $3.25 | Typical residential runs |
| Mesh size (4×4, 6×6, 6×6.5) | $0.25 | $0.40 | $0.60 | Smaller openings cost more material per area |
| Height (4 ft, 5 ft, 6 ft) | $1.00 | $1.60 | $2.20 | Higher panels require more posts |
| Labor (installation) | $0.95 | $1.60 | $2.30 | Per linear foot; varies by terrain |
| Posts and rails | $0.50 | $0.95 | $1.35 | Line posts, corner posts, end posts |
Summary Note: The overall project usually shows a total price range from about $1,800 to $7,000 for typical backyards, depending on length, height, and terrain.
Typical Woven Wire Fence Pricing by Length and Height
The cost commonly scales with linear footage and the fence height. A standard 100-foot run at 4 feet high often lands in the $1,900-$2,900 range, inclusive of posts and fasteners. If the run is 200 feet and stands at 6 feet, costs can rise to $4,000-$7,000 depending on soil, access, and local labor rates. Per-foot pricing helps reflect project scale; expect $2.50-$3.25 per linear foot for the fence material plus about $1.20-$2.30 per foot for installation labor to cover posts, fasteners, and stringing. Customers should budget for higher costs if the terrain is rocky, slopes, or there is restricted access.
Major Cost Components in Woven Wire Fencing Quotes
Quotes split into four to six core parts: materials, labor, equipment, and incidental costs. The following table outlines typical allocations for a mid-range 150-foot, 5-foot-high woven wire fence project.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $375 | $600 | $900 | Mesh, posts, ties, staples |
| Labor | $225 | $350 | $650 | Installation, post setting |
| Equipment | $80 | $120 | $260 | Tools, augers, post drivers |
| Permits | $0 | $50 | $300 | Local permit or inspection if required |
| Delivery/Disposal | $0 | $40 | $120 | Material transport; old fence removal if needed |
| Warranty/Tax | $20 | $50 | $150 | Material warranty; local taxes |
| Total | $700 | $1,210 | $2,380 | Range reflects site conditions |
Assumptions: standard galvanized woven wire, 4-6 foot height, level ground, and standard driving conditions.
Key Variables That Change the Final Price
Two major drivers often shift quotes significantly: terrain and access and mesh size paired with height. Steeper slopes or rocky soil slow post driving and increase labor hours. For example, a 100-foot run on flat ground averages $1,900-$2,500, but on a steep slope with rocky soil the cost can jump to $2,800-$3,600. Mesh choices also matter: a 6×6 inch opening with 5-foot height will cost more per foot than a 4×4 inch opening at 4 feet due to material use and extra posts.
Material and Mesh Size Impact on Price
Material selection and mesh aperture drive both material and labor costs. Narrower mesh (4×4) tends to cost less per square foot than larger openings (6×6), but requires careful tensioning and more precise alignment, sometimes raising labor hours. A 100-foot run using 4-foot height with 6×6 mesh commonly falls in the $1,900-$2,600 range, while the same run with 4×4 mesh at 4 feet might be $1,700-$2,200. Material quality, galvanization level, and bar spacing influence long-term maintenance costs as well.
Regional Price Variations Across U.S. Regions
Prices show regional variation due to labor rates and material shipping. In the Northeast, expect higher labor rates, pushing average project costs up by 10-15% relative to the Midwest. The Southern states may offer lower labor costs but face higher material transport fees in some counties. A typical 150-foot, 5-foot fence can span $1,500-$2,600 in the Midwest, $1,900-$3,100 in the Northeast, and $1,700-$2,800 in the Southeast, with regional adjustments for terrain and access. Always request a region-specific quote to capture local factors.
Labor Time and Crew Size for Typical 100-Foot Runs
Labor time scales with run length and ground conditions. A single crew of two workers on flat ground can install 100 feet of 5-foot fence in roughly 6-8 hours, costing about $1,000-$1,800 in labor. If the site has soft soil or requires trenching for post setting, labor may rise to 9-12 hours, elevating labor cost to $1,500-$2,700. For longer runs (200 feet) or steeper terrain, add crew size or hours accordingly. Document the expected labor hours and hourly rate in the quote.
Upgrade Options: Galvanized vs Vinyl-Coated Woven Wire
Galvanized woven wire is standard and typically the most economical option. Vinyl-coated or polymer-coated mesh offers corrosion resistance and a different visual profile but adds material and application costs. A 4-foot galvanized 6×6 fence costs about $2.20-$3.00 per foot, while vinyl-coated 6×6 at the same height runs roughly $2.80-$4.50 per foot installed. Over a 150-foot stretch, that can add approximately $60-$450 in extra cost, depending on coating quality and color. Consider coating benefits against budget and maintenance expectations.
Ways to Cut Costs Without Compromising Safety
Cost-saving strategies focus on scope control and material choices. Retaining existing posts where feasible, reducing height from 6 feet to 5 feet, and limiting mesh size to standard 4×eights can trim material costs. Scheduling installs during off-peak seasons can reduce labor rates by 5-15% in some markets. If appropriate, replacing a segment rather than the entire fence, and bundling with gate installations or repairs can yield savings through contractor bundling. Compare multiple quotes and verify site access before committing.
