Homeowners typically pay for wood lattice fence panels based on panel size, wood type, lattice pattern, and installation specifics. This article breaks down the price ranges you can expect, including per-panel and per-square-foot costs, so budget planning is accurate for the project.
Assumptions: standard 6-foot-tall panels, common pine or cedar, fully installed with basic clips and staining, typical suburban site access.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Wood lattice panel (6 ft x 6 ft) | $44 | $60 | $110 | Material only for untreated pine |
| Wood lattice panel (6 ft x 6 ft) premium wood | $70 | $95 | $150 | Cedar or hardwood blend |
| Delivery per panel | $0 | $15 | $40 | Depends on distance |
| Labor to install per panel | $25 | $40 | $70 | Includes fasteners and basic mounting |
| Stain/seal treatment per panel | $5 | $10 | $20 | Water-based stain, standard color |
Formula: labor per panel × hourly rate + material cost + delivery
Direct panel pricing by size and wood type
Prices for ready-made lattice panels vary by wood species and panel dimensions. A standard 6 ft by 6 ft panel in common pine runs around $44-$60 for material, while cedar or premium softwoods push to $95-$110 per panel. When choosing a lattice pattern (diagonal, square, or diamond), expect modest increases in material waste and price.
For a typical 6-foot-tall, 6-foot-wide panel, plan $60-$95 for material and $15-$40 per panel for delivery if you are buying off the shelf.
Per-unit and per-square-foot cost comparisons
Calculating cost per square foot helps align project budgets with larger fence runs. A 6 ft tall by 6 ft wide lattice panel covers 36 square feet, so material cost averages around $1.50-$3.00 per ft² for common pine, and $2.50-$4.00 per ft² for cedar. Labor adds roughly $1.00-$2.50 per ft² on average when installed by a pro.
Expect total price per panel including labor to land between $60 and $160 depending on wood grade and installation complexity.
Regional price differences for lattice panels
Prices vary by region due to timber availability, labor markets, and delivery distance. The Midwest and Southeast tend to show mid-range material costs, while coastal regions may be higher due to logistics. In rural areas, labor rates can be noticeably lower, but delivery costs may balance that out.
Typical regional spread: West Coast panels with labor and delivery can reach the $120-$180 per panel range, while the Central U.S. often sits around $70-$110 per panel including basic labor.
Labor and installation scope that affect quotes
Labor charges depend on crew size, site access, existing fencing, and whether posts or rails are replaced. A single installer with minimal site prep will be at the lower end, while a two-person crew with post-setting, concrete, and staining will push toward the higher end.
Assume standard installation involves setting posts, attaching panels, and basic staining; more complex site prep adds hours and cost.
How pattern choice and panel size shift pricing
Patterns with tighter lattice (diamond versus diagonal) usually require more material and slower cuts, increasing both material waste and labor. Larger panels (8 ft by 6 ft or 6 ft by 8 ft) raise material costs by roughly 25% to 60% compared with 6 ft by 6 ft panels, and can require longer hardware runs and extended installation time.
Size and pattern are among the strongest price drivers for lattice fences.
Materials, finish, and long-term value considerations
Material choice affects both upfront cost and maintenance. Cedar resists decay and typically holds up longer than treated pine, but costs more initially. Staining or sealing adds ongoing upkeep, with a typical maintenance cycle every 2-4 years to preserve appearance and prevent warping.
Budget for a finish: 5-year maintenance may add $5-$12 per ft² over time, depending on climate and exposure.
Cost breakdown by major components
Below is a simplified quote structure for a mid-range project in a typical suburban setting. The table shows four to six common cost components that appear on most bids.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Panels (6 ft x 6 ft, pine) | $44 | $60 | $95 | Material only |
| Panels (6 ft x 6 ft, cedar) | $70 | $95 | $140 | Premium wood |
| Delivery | $0 | $15 | $40 | Distance dependent |
| Labor to install per panel | $25 | $40 | $70 | Includes fasteners |
| Stain/Seal per panel | $5 | $10 | $20 | Color choice varies |
| Post hardware and mounting | $10 | $15 | $25 | Clips, screws, brackets |
Formula: (Panel price × quantity) + delivery + (labor × hours) + staining
Variables that most influence final quotes
Size and region are the top two drivers. For example, an 8 ft tall panel or a 8 ft long run increases material by about 25% to 60% and labor by 15% to 40% due to extra fasteners and time. Pattern complexity (diamond vs diagonal) can add 10% to 25% in both material waste and labor hours. Local permit requirements for fence height can add minor costs if inspections are needed.
Two numeric thresholds commonly seen: panel height at 6 ft vs 8 ft; run length > 100 linear ft triggers bulk-discount bidding or delivery surcharges.
Practical ways to reduce wood lattice panel costs
Control scope to avoid unnecessary upgrades, compare quotes from multiple vendors, and consider alternative materials for budget-sensitive projects. Ways to trim price include choosing standard 6 ft x 6 ft panels, opting for pine rather than cedar, scheduling mid-season when labor demand is lower, and bundling installation with other fence work.
Focus on scope clarity, material choice, and scheduling to lower the overall price without sacrificing essential quality.
