Typical wood fence installation costs for 100 ft vary by wood species, height, gate count, and existing terrain. The main drivers are material price, labor hours, and site prep. A realistic budget relies on selecting the right wood and confirming local permitting requirements.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Material cost | $1,000 | $2,500 | $4,500 | Pine vs cedar; pressure-treated vs exotic hardwood; 4–6 ft height |
| Labor | $1,800 | $2,000 | $3,100 | Crew hours; weekend/holiday work affects rate |
| Permits & inspections | $0 | $200 | $800 | Depends on locality |
| Hardware & concrete | $150 | $350 | $700 | Posts, nails, brackets, feet of concrete |
| Delivery & disposal | $100 | $250 | $500 | Waste removal and material transport |
| Warranty & contingencies | $50 | $150 | $400 | Limited vs full coverage |
Overview Of Costs
Cost ranges reflect 100 ft of residential wooden fencing with typical gates and terrain. Assumptions: standard 6 ft privacy panels, pressure-treated or cedar, no major obstacles. The table below shows total project ranges and per-unit guidance.
Total project range: $2,800-$6,200. Per-foot ranges: $28-$62/ft depending on wood choice and gates. Assumptions: region, specs, labor hours.
Cost Breakdown
Material selection and installation steps drive most of the cost. The table uses a mix of totals and per-unit pricing to illustrate how each factor contributes to the overall price.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $1,000 | $2,500 | $4,500 | Pine or treated pine on the low end; cedar or pressure-treated redwood on higher end |
| Labor | $1,800 | $2,000 | $3,100 | Includes trenching, post setting, panel installation |
| Equipment | $100 | $300 | $600 | Post hole digger, auger, ladders, saws |
| Permits | $0 | $200 | $800 | Local permit may apply |
| Delivery/Disposal | $100 | $250 | $500 | Material transport and debris removal |
| Accessories | $50 | $150 | $350 | Caps, latches, hinge hardware |
What Drives Price
Wood type, height, and gate count are the primary cost levers. Regional labor rates and terrain complexity also matter. For 100 ft, a common setup is 6 ft tall panels with 1 gate; upgrades to 8 ft height or decorative post caps increase costs. The table below highlights key drivers with numeric thresholds.
- Wood type: pine or cedar; cedar typically adds 20–40% more material cost than pine
- Height: 6 ft vs 4 ft affects panel quantity and anchoring depth by roughly 15–25%
- Gate count: additional gates add $400–$900 per gate for hardware and installation
- Terrain: uneven ground or slopes may require more trimming and special posts
Ways To Save
Planning ahead and shopping smart can reduce costs by several hundred dollars. Consider material-only upgrades or bundling labor with other exterior projects. The suggestions below focus on practical, cost-conscious options.
- Choose pressure-treated pine over cedar if budget is the priority
- Opt for pre-fabricated panels to reduce on-site cutting time
- Minimize gate count or select a simpler hinge style
- Request a single contractor to handle permits if permitted in advance
Regional Price Differences
Prices can vary by region due to labor and material availability. The following contrasts three U.S. markets to illustrate typical deltas.
- Coastal metro: +5% to +15% higher than national average due to labor demand and shipping
- Midwest suburban: near the national average with moderate variability
- Rural Southwest: -5% to -15% lower due to lower labor rates and material access
Labor, Hours & Rates
Labor costs reflect crew size and time to complete 100 ft of fencing. A typical crew of two to three workers may need 10–18 hours depending on terrain and gate installation. Use the formula below to estimate labor cost quickly: data-formula=”labor_hours × hourly_rate”>.
Real-World Pricing Examples
Concrete scenarios help set expectations for different budgets. Assumptions: standard 6 ft panels, one gate, level ground, local pricing norms.
- Basic: Materials $1,100; Labor 12 hours; Delivery $100; Total $2,300
- Mid-Range: Materials $2,400; Labor 14 hours; Permits $150; Total $4,000
- Premium: Materials $4,000; Labor 16 hours; Gate upgrade $600; Delivery $250; Total $6,200
Assumptions: region, specs, labor hours.
