Buyers commonly pay for rescreening based on window count, screen material, and installation labor. The cost and price range depend on window size, screen type, and whether any frame repairs are needed. This guide breaks down typical ranges and the main drivers to help set a realistic budget.
Assumptions: region, specs, labor hours.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (screen) | $0.50 | $1.20 | $2.50 | |
| Labor (per window) | $25 | $45 | $85 | |
| Perimeter Frame/Repair | $10 | $25 | $60 | |
| Delivery/Disposal | $0 | $5 | $15 | |
| Taxes / Permits | $0 | $5 | $25 |
Overview Of Costs
Typical cost range for rescreening a single standard window is $20-$60 per window, combining screen material and labor. For larger or specialty openings, expect higher prices or per-unit adjustments up to $120-$150 per window when frame repairs or custom screens are needed. A full home with many standard windows commonly lands in the $300-$1,200 range, while a high-end home with many large or awkward windows can reach $2,500 or more.
Cost Breakdown
The following table shows how costs accumulate, with a mix of totals and per-unit figures. Assumptions: residential single-hung or sliding windows, standard aluminum or fiberglass screening, typical 2–4 foot widths.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $0.50 | $1.20 | $2.50 | Fiberglass or aluminum screen mesh; bulk purchases reduce cost |
| Labor | $25 | $45 | $85 | Per window; longer runs reduce per-window labor |
| Frame/Repair | $10 | $25 | $60 | Includes frame replacement or minor spline work |
| Delivery/Disposal | $0 | $5 | $15 | Transporting materials; disposal of old screening |
| Taxes | $0 | $5 | $25 | Sales tax varies by state |
| Per-Unit Estimate (one window) | $20 | $50 | $120 | Includes materials and labor; larger windows push up price |
What Drives Price
The main cost drivers are screen material, window size, and labor time. Larger or irregular openings require more materials and longer installation. Screen type matters: fiberglass screens cost less than premium vinyl or aluminum alloys. In addition, any frame work, spline replacement, or corner repairs adds to the total.
Factors That Affect Price
Several specific factors influence the final bill. Window size and configuration (width, height, and whether the window is fixed or operable) determine material needs and labor time. Screen type and mesh affect material costs and durability. Regional differences in labor rates and disposal costs also shift pricing. Projects involving multiple stories, steep access, or cluttered work areas tend to rise in price due to time and safety considerations.
Ways To Save
Ask for a bulk discount when screening many windows; some contractors offer lower per-window rates for 10+ openings. Consider DIY where feasible for basic screening, reserving professional service for frame repairs or custom screens. Choosing standard mesh and avoiding color-matched or specialty frames can lower costs. Scheduling during off-peak seasons may yield modest price reductions in some markets.
Regional Price Differences
Prices vary across the U.S. due to labor markets and material costs. In the Northeast, expect higher labor rates than the South. Suburban areas typically run slightly above rural zones and below major metro centers. In general, you might see:
- Coastal urban: +10% to +20% vs national average
- Suburban: around baseline to +10%
- Rural: -5% to -15%
Regional variation matters most when estimating totals for many openings. Local contractor quotes will reflect these regional deltas and any permit or disposal charges unique to the area.
Labor, Hours & Rates
Labor rates typically range from $25 to $85 per hour depending on market and expertise. Average jobs run 0.5–2 hours per window for standard screens, with larger or more complex frames taking longer. A small, straightforward job may be well under $200 total, while a full home with complex frames can exceed $1,000 easily.
Additional & Hidden Costs
Be aware of potential extras. Frame repair or replacement may add $10–$60 per window. Storm window removals or adjustments sometimes incur additional labor. Some providers charge for drive time, dumpster fees, or after-hours work. Request a written scope to avoid surprises and confirm whether a warranty covers mesh tears or frame corrosion.
Real-World Pricing Examples
Three scenario cards illustrate typical ranges. Assumptions: region = moderate market; standard aluminum or fiberglass screens; no major frame repairs.
- Basic: 5 standard windows, fiberglass mesh, no frame repair. Materials $0.80/window, Labor $30/window, small add-ons $10 total. data-formula=”labor_hours × hourly_rate”> Estimated total: $150-$300.
- Mid-Range: 12 standard windows, mixed mesh types, minor frame touch-ups. Materials $1.10/window, Labor $40/window, Repairs $20/window. Estimated total: $600-$1,100.
- Premium: 20 large or irregular windows, aluminum mesh, multiple frame replacements, disposal fees. Materials $2.20/window, Labor $70/window, Frame $50 total, Fees $100. Estimated total: $2,200-$2,800.
