Replacing a Whirlpool control board typically falls in a moderate price range, driven by part cost, labor time, and the model’s complexity. The price landscape combines the control board itself, diagnostic fees, and potential ancillary parts. Cost awareness helps buyers compare service quotes and avoid overspending.
Assumptions: region, Whirlpool model, main control board vs. keypad/board assembly, diagnosis included.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Control Board | $180 | $320 | $520 | OEM board or high-quality aftermarket; model compatibility matters |
| Diagnostic Visit | $60 | $120 | $180 | Typical flat diagnostic fee or applied to repair if approved |
| Labor for Replacement | $120 | $210 | $350 | 2–4 hours depending on access and wiring harness |
| Additional Parts | $0 | $60 | $140 | Ribbon cables, connectors, or fuses may be needed |
| Taxes & Permits | $0 | $20 | $40 | varies by state and service type |
| Delivery/Delivery | $0 | $0 | $15 | Depot-to-home or courier fees |
| Total Range | $360 | $770 | $1,140 | Assumes parts, labor, and typical service window |
Overview Of Costs
Cost estimates for Whirlpool control board replacement cover a wide range. On the low end, a basic board replacement with standard installation may cost around $360, while a mid-range repair with OEM components commonly lands near $770. In cases with rare board versions or extensive wiring work, totals can exceed $1,100. Assumptions: regional labor rates typical availability of parts, and standard diagnostic process.
Cost Breakdown
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $180 | $320 | $520 | Control board and any required adapters |
| Labor | $120 | $210 | $350 | Typically 2–4 hours; rates vary by region |
| Diagnostics | $60 | $120 | $180 | Assessment of control board vs other faults |
| Permits/Taxes | $0 | $20 | $40 | Depending on locale |
| Delivery/Fees | $0 | $0 | $15 | Delivery or courier charges may apply |
| Warranty | $0 | $20 | $60 | Labor or parts warranty extension options |
What Drives Price
Price is influenced by control board compatibility, whether a full assembly or keypad module is replaced, and the service level. Key drivers include model complexity (premium Whirlpool lines may use specialized boards), regional labor rates, and the need for additional components such as harnesses or connectors. Assumptions: standard residential appliance service.
Factors That Affect Price
Two niche drivers frequently alter the final bill. First, the board’s exact revision or compatibility with smart features can push part costs higher. Second, the time required to access the control board—through tight cabinetry or stacked components—can raise labor hours. Budget planning should account for potential extra parts or longer repair windows.
Regional Price Differences
Prices vary across regions due to labor markets and parts availability. In the Northeast urban centers, expect higher labor rates compared with Midwest suburban areas or rural regions. A typical spread might show averages of $750–$1,000 in urban markets, $650–$900 in suburban areas, and $520–$800 in rural settings. Assumptions: standard service call within metro or nearby areas.
Labor & Installation Time
Labor costs commonly reflect 2–4 hours of technician time. For a straightforward board swap, 2 hours at $90–$125 per hour yields $180–$250 in labor. Complex access or partial disassembly can push to 4 hours at $100–$150 per hour, equating to $400–$600. Expect longer sessions on stacked washer-dryer combos or tight cabinet spaces.
Additional & Hidden Costs
Hidden fees may appear as diagnostic surcharges, trip fees, or core charges for returns. If a repair is declined after diagnosis, diagnostic fees may stand alone. Taxes and any expedited shipping for same-day parts can add 20–40 dollars. Assumptions: standard service terms; no nonstandard shipping.
Real-World Pricing Examples
Scenario: Basic Replacement
Specs: Whirlpool top-load washer; OEM control board; minimal accessories; standard labor. Hours: 2.0–2.5
Totals: Parts $180 + Labor $150 + Diagnostics $60 = $390 (plus minor taxes)
Scenario: Mid-Range Upgrade
Specs: Whirlpool front-load with upgraded control module; wiring harness adapters included. Hours: 2.5–3.5
Totals: Parts $320 + Labor $230 + Diagnostics $100 = $650 (before taxes)
Scenario: Premium Install
Specs: High-end model requiring keypad module and specialized board; comfort wiring alterations. Hours: 3.5–4.5
Totals: Parts $520 + Labor $420 + Diagnostics $140 = $1,080 (plus potential tiny delivery fee)
Assumptions: regional pricing varies; quotes may include tax and contingency.
Ways To Save
Budget tips focus on comparing quotes, verifying part compatibility, and timing service. Some savings come from opting for a refurbished control board with warranty or bundling the replacement with other eligible service needs. Scheduling in off-peak hours can reduce labor charges, and requesting a fixed-price quote helps prevent scope creep. Assumptions: standard warranty terms and local market rates.
Price By Region
Regional pricing differences can be substantial. In large coastal cities, higher labor rates push the average repair toward the upper end of the range. Inland regions often show mid-range pricing, while rural areas may land on the lower end. For a Whirlpool control board replacement, consider a typical range of $560–$1,000 in urban markets, $520–$900 in suburban places, and $430–$750 in rural communities. Compare multiple local quotes to identify the best value.
