Trex deck material cost is driven by board type, board length, and installation complexity. This guide presents typical price ranges in USD and breaks down the main cost drivers to help buyers estimate a project budget.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Board Material | $3.50 | $6.50 | $9.50 | Trex composite boards per sq ft |
| Labor & Installation | $6.00 | $12.00 | $22.00 | Per sq ft installed |
| Hardware & Accessories | $0.80 | $2.50 | $4.50 | Hidden fasteners, clips, trim |
| Delivery/Disposal | $0.50 | $1.50 | $3.00 | Per sq ft or project fee |
| Permits | $0 | $300 | $1,000 | Depends on jurisdiction |
| Warranty | $0 | $100 | $300 | Extended coverage |
| Taxes & Overhead | $0 | $1.50 | $4.00 | Sales tax and contractor markup |
Assumptions: region, project size, slope, access, and substructure condition
Overview Of Costs
Total project ranges for a DIY-friendly Trex deck typically span from about $6,000 to $18,000 for 300-600 sq ft, depending on board style and labor. Assumptions: regional labor rates and deck size
Per-square-foot ranges often fall between $11 and $23 installed, factoring materials, labor, and finish work. Assumptions: mid-range board profile and standard installation
Cost Breakdown
data-formula=labor_hours × hourly_rate>
| Costs | Materials | Labor | Equipment | Permits | Delivery/Disposal | Accessories | Warranty | Overhead | Taxes |
|---|---|---|---|---|---|---|---|---|---|
| Assumed per-sq-ft | $4.50-$8.50 | $7-$15 | $0.50-$1 | $0-$0.60 | $0.50-$1.50 | $0.50-$1.50 | $0-$0.30 | $0.50-$1.50 | Varies by state and total |
| Assumed project example | Material mix: Trex select or tranformed line | Crew hours vary with slope and access | Tools and safety gear | Local permit if required | Delivery to site | Clips, screws, fascia | Limited vs extended | Contractor margin | Taxes applied |
What Drives Price
Board profile and color affect material cost; deep wood-tone and anti-stain finishes cost more. Assumptions: typical residential board selections
Deck size and layout dictates labor time and delivery; irregular shapes add complexity. Assumptions: standard rectangle deck with a single level
Substructure accessibility influences crew hours; tight spaces or elevated decks raise costs. Assumptions: good access with ground-level or elevated installation
Ways To Save
Choose standard profiles and finish options to reduce material costs. Assumptions: mid-range color with basic texture
Optimize layout for fewer cuts and simpler runs to cut labor. Assumptions: straightforward square/rectangular deck
Regional Price Differences
Urban areas typically see higher total costs due to labor and permitting. Assumptions: metro markets
Suburban markets show mid-range pricing with moderate permit requirements. Assumptions: typical single-family zones
Rural markets may offer lower labor but added delivery fees or limited contractor options. Assumptions: lower density and remote sites
Labor, Hours & Rates
Per-hour crew rates commonly range from $55 to $110 for carpentry and decking installation. Assumptions: standard weekdays, typical crew size
Install time varies by deck size and complexity; a 300-400 sq ft deck may require 2-4 days. Assumptions: average weather and generous access
Real-World Pricing Examples
Basic scenario: 250 sq ft, standard Trex decking, hidden fasteners, level site. Materials $1,125; Labor $1,750; Accessories $350; Permits $0; Total $3,225. Assumptions: simple rectangle, standard color
Mid-Range scenario: 350 sq ft, premium Trex line, decorative railing, level site. Materials $2,150; Labor $2,900; Accessories $600; Permits $250; Total $5,900. Assumptions: medium complexity, curb appeal features
Premium scenario: 500 sq ft, top-tier Trex, multiple levels, custom railing, complex layout. Materials $4,000; Labor $5,500; Accessories $900; Permits $600; Total $11,000. Assumptions: high-end finish, challenging access
Assumptions: region, specs, labor hours
