People evaluating Timbertech and Trex often want a clear view of the cost, including materials and installation. Typical price ranges are driven by product line, board width, railing options, and site conditions. This guide lays out cost, price components, and savings strategies for U.S. buyers.
Assumptions: region, specs, labor hours.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Decking Materials (boards only) | $2.50/sq ft | $4.50/sq ft | $6.50/sq ft | Timbertech or Trex composite boards; capped decking |
| Installed Decking (materials + labor) | $8.00/sq ft | $14.00/sq ft | $22.00/sq ft | Includes framing, fasteners, and basic milling |
| Railing System (per linear ft) | $30/ft | $60/ft | $90/ft | Standard aluminum or capped composite rails |
| Labor (per hour) | $40/hr | $60/hr | $85/hr | Crew size varies by job |
| Permits & Inspections | $100 | $400 | $1,000 | Region dependent |
| Delivery & Disposal | $0.50/sq ft | $1.50/sq ft | $3.00/sq ft | Distance from supplier matters |
Overview Of Costs
Cost ranges for Timbertech and Trex decking typically hinge on product line, board length, and installation scope. The total project commonly spans roughly $8,000 to $28,000 for a standard 250-square-foot deck, depending on level of finish and railing. Per-square-foot costs usually run from about $8 to $22 for installed decking, with railings adding substantially to the total.
Price At A Glance
Timbertech and Trex share similar price bands, though some lines may skew slightly higher or lower depending on color, texture, and warranty. Per-unit pricing for boards typically falls in the $2.50–$6.50 range, with installed totals in the $8–$22 per square foot window. Material-only vs. complete installation costs vary by contractor and site access.
Cost Breakdown
| Category | Timbertech (Low) | Timbertech (Avg) | Trex (Low) | Trex (Avg) |
|---|---|---|---|---|
| Materials (boards) | $2.60/sq ft | $4.70/sq ft | $2.50/sq ft | $4.60/sq ft |
| Labor | $14.00/sq ft | $22.00/sq ft | $13.50/sq ft | $21.50/sq ft |
| Railing (per ft) | $32/ft | $58/ft | $28/ft | $60/ft |
| Permits | $100 | $500 | $120 | $450 |
| Delivery/Disposal | $0.60/sq ft | $1.70/sq ft | $0.70/sq ft | $1.80/sq ft |
| Warranty & Maintenance | $0.10/sq ft | $0.25/sq ft | $0.10/sq ft | $0.30/sq ft |
Assumptions: project area 250 sq ft; region, crew size, and finish level vary.
What Drives Price
Material quality and cap layer thickness are major price levers. Timbertech lines with thicker caps and more realistic wood looks tend to sit at the high end. Board length and profile (grooved vs. square edge) also affect material waste and labor time, influencing total cost.
Cost Components
Installation costs break down into labor, materials, and ancillary items. Labor hours depend on deck size, stair work, and railing complexity. data-formula=”labor_hours × hourly_rate”> Typical labor rates in this sector range from $40 to $85 per hour, depending on region and crew experience.
Regional Price Differences
Prices vary by region due to labor markets and material access. In the Northeast, installed decking may trend higher than the Southeast, while the Midwest often sits near the national average. Urban vs. Suburban vs. Rural markets show a ±10–20% delta, with rural areas sometimes more affordable on labor but added delivery costs for materials.
Labor & Installation Time
Labor requirements scale with deck size, stair additions, and railing complexity. A simple 150–200 sq ft deck may take 2–3 days, while larger or multi-tiered designs extend to 4–6 days. Estimated hours are a practical guide, not a guarantee, as site access and weather affect progress.
Real-World Pricing Examples
Three scenario cards illustrate typical outcomes for Timbertech and Trex projects. Assumptions: region, specs, labor hours.
Basic
Deck size: 180 sq ft; standard grooved boards; minimal railing; basic flattening of site. Materials: $2.60–$4.70/sq ft; Installed total: $8,000–$12,000. Labor: 60–80 hours; Per-hour: $40–$60. Railing: 60 ft; $32–$58/ft. Delivery: $0.60–$1.70/sq ft. Permits: $100–$400.
Mid-Range
Deck size: 250 sq ft; premium cap boards; mid-range railing. Materials: $4.00–$5.50/sq ft; Installed total: $12,000–$18,000. Labor: 90–120 hours; Per-hour: $50–$70. Railing: 80 ft; $40–$70/ft. Delivery: $1.00–$1.80/sq ft. Permits: $200–$600.
Premium
Deck size: 350 sq ft; premium textures; full railing with lighting. Materials: $5.50–$6.50/sq ft; Installed total: $20,000–$28,000. Labor: 140–180 hours; Per-hour: $60–$85. Railing: 110 ft; $60–$90/ft. Delivery: $1.20–$2.50/sq ft. Permits: $400–$1,000.
Maintenance & Ownership Costs
Both Timbertech and Trex decks typically require minimal maintenance compared with wood. Cleanings, annual inspection, and occasional sealing or washdowns help preserve color and integrity. Five-year cost outlook generally remains stable, with potential re-sealing or board replacement as a long-term consideration.
