Prices for side hung garage doors vary by material, size, and installation specifics. This guide covers typical cost ranges, per-unit pricing, and how components affect the total price of a side hung setup. Buyers can expect the main drivers to be door material, door width and height, hardware, and labor for install.

Item	Low	Average	High	Notes
Door only (single 8×7 ft, steel)	$1,200	$2,000	$3,200	Retail-ready steel doors vary by gauge and finish
Door only (single 9×7 ft, wood)	$2,000	$3,000	$5,500	Higher due to wood species and milling
Complete installation (Door + tracks)	$1,000	$1,800	$3,000	Average labor ranges by region
Hardware and components	$150	$350	$700	Includes springs, hinges, rollers, weather seals
Permits and inspections	$75	$150	$400	Regional variation may apply
Delivery/Disposal	$50	$180	$350	Depends on distance and bulk
Total project price (typical 8×7 steel, regional)	$2,225	$3,000	$5,000	Includes door, tracks, labor, and disposal

Assumptions: Midwest labor rates, standard steel or composite panels, normal access, single-car installation, no custom design.

What Buyers Usually Pay for Side Hung Garage Doors

Side hung garage doors command costs driven by door material, size, and installation complexity. A typical project for a standard 8×7 ft steel door ranges from $1,200 to $2,000 for the door itself, with installation adding $1,000 to $1,800. For larger or premium options, totals often reach $4,000 when including hardware, permits, and disposal.

Assumptions: regional labor rates, standard hardware, and typical driveway access.

Material, Width, and Height: How They Drive Price

Door material is the primary cost lever. Steel remains the most affordable, followed by aluminum and wood. Wood doors can exceed steel by 50% to 100% for a similar size due to material cost and finishing work. Width and height add per-unit costs: each extra foot in width can add $150–$400, while added height (7 ft vs 8 ft) can add $150–$350.

Assumptions: single-car door, standard panel designs, basic finishes.

Labor and Installation: Typical Time and Rate Ranges

Installation labor for a side hung door generally runs from $800 to $1,800 depending on region, site access, and whether framing work is needed. Labor calculators frequently show where hours typically fall in the 6–14 hour range for mid-size doors with standard hardware.

Assumptions: licensed installer, no major structural work, standard weatherproofing.

Hardware, Tracks, and Accessories: What to Expect in the Quote

Hardware packages for side hung doors include tracks, rollers, hinges, torsion or extension springs, seals, and mounting brackets. A practical range for hardware is $150 to $700, influenced by spring system (torsion vs extension), roller material, and weather seals. Upgrades to high-cycle springs or insulated panels raise costs further.

Assumptions: standard spring system and standard rollers; no exotic finishes.

Regional Variations That Move the Price Needle

Prices in dense urban markets (e.g., coastal cities) trend higher than rural areas due to labor and logistics. The regional delta can be as much as ±30% around national averages. For example, a standard 8×7 steel side hung door might cost $1,900 in a Midwest market vs $2,500 in a West Coast city, excluding permits.

Assumptions: standard permit processes with typical inspection fees by state.

Replacement vs. Repair: A Cost-Dual That Affects Quotes

Repairs on side hung doors—such as replacing a faulty roller track or a spring—tend to be less than full door replacement but can escalate quickly if multiple components fail. A minor repair may run $150–$500, while a full replacement of a single door and hardware can reach $2,500–$4,500, depending on material and accessibility.

Assumptions: no structural damage, standard access, no emergency dispatch.

Cost-Saving Tactics: Practical Ways to Reduce the Price

To lower total costs, consider keeping the existing frame if structurally sound, opting for standard materials, and avoiding premium finishes. Scheduling in mild seasons, bundling hardware upgrades, and obtaining multiple quotes can shave 10–20% off the project. If repairs suffice, prioritize drivetrain maintenance before a full door swap.

Assumptions: typical regional pricing, normal labor availability, no rush work.

Compare Common Configurations: Per-Unit and Per-Project Pricing

Here are representative price points per configuration to help budget planning. For an 8×7 ft door, steel panel with basic hardware, expect the door and installation to range from $2,000–$3,000. A premium wood-veneered option of the same size can push to $4,000–$6,000 including labor and hardware. For a larger 9×7 ft setup, add roughly $400–$900 to the door price, plus installation that scales similarly.

8×7 steel with standard hardware	$2,000–$3,000
8×7 wood veneer, premium finish	$3,500–$5,500
9×7 steel with upgraded rollers	$2,600–$3,800
9×7 wood door, full frame upgrade	$4,500–$7,000