Prices for a 1100 sq ft roof typically depend on material, removal of an old roof, underlayment, insulation, and local labor rates. The main cost drivers are roof pitch, attic access, and the chosen shingle type. This guide provides cost ranges in USD with practical pricing details and a real-world framing of expenses.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Roofing material | $2,000 | $4,750 | $9,000 | Asphalt shingles on 1100 sq ft; higher for architectural or premium shingles. |
| Removal of existing roof | $1,000 | $2,000 | $4,000 | Includes disposal and debris cleanup; varies with shingle type. |
| Labor (installation) | $1,500 | $3,000 | $6,000 | Typically billed per square or hour; affected by pitch and crew size. |
| Underlayment & moisture barrier | $300 | $900 | $1,500 | Important for long-term protection; varies by product. |
| Delivery/Disposal | $150 | $400 | $1,000 | Based on dumpster or hauler fees. |
| Permits & code compliance | $0 | $300 | $1,000 | Depends on municipality and project scope. |
| Warranty & overhead | $100 | $400 | $1,000 | Material and workmanship warranties may vary. |
| Taxes | $0 | $200 | $600 | Local sales tax where applicable. |
Assumptions: region, shingle type, roof pitch, and labor hours.
Overview Of Costs
Estimated total project ranges for a 1100 sq ft roof span from roughly $4,850 to $11,250, reflecting common asphalt shingle installs with and without old roof removal. The per-square cost for material typically falls in the $4.00-$9.00 per sq ft range depending on shingles, with removal and disposal adding a separate line item. For a mid-range project using architectural shingles, buyers should expect the bulk of the expense to be labor and material combined, not only the shingles themselves.
Cost Breakdown
The following table consolidates major cost buckets to show where money goes.
| Category | Low | Average | High |
|---|---|---|---|
| Materials | $2,000 | $4,750 | $9,000 |
| Labor | $1,500 | $3,000 | $6,000 |
| Equipment | $150 | $350 | $800 |
| Permits | $0 | $300 | $1,000 |
| Delivery/ disposal | $150 | $400 | $1,000 |
| Warranty | $100 | $400 | $1,000 |
| Overhead & Taxes | $0 | $200 | $600 |
What Drives Price
Key price levers include roof pitch, removal of old roofing, and material choice. A steeper roof increases labor time and safety requirements, boosting costs. Removing an old roof adds disposal and debris handling fees. Material selection, from basic asphalt to architectural shingles or metal, markedly shifts both material and installation costs. Higher-end options also typically carry longer warranties and better protection from wind and moisture.
Regional Price Differences
Prices vary by region, with notable deltas between urban, suburban, and rural markets. In the Northeast and West Coast, higher labor rates and permitting costs push totals upward by roughly 5–15% compared with the Midwest. Suburban markets often sit between urban and rural, reflecting a mix of crew availability and access. Rural areas may save on labor but incur higher delivery/disposal fees if local facilities are scarce.
Labor, Hours & Rates
Labor is a major portion of the cost, typically ranging $1,500-$6,000 for 1100 sq ft. Install time depends on roof pitch, debris management, and crew efficiency. A common crew might include 3–5 workers for 1–3 days, depending on complexity. A simple, low-pitch install on a single-story home can be faster and cheaper than a multi-story or high-pitch replacement.
Additional & Hidden Costs
Expect potential add-ons that affect the bottom line. These can include roof deck repairs, fascia replacement, venting upgrades, ice dam protection in colder climates, and upgraded underlayment for extreme weather. Unexpected deck damage discovered during removal may require additional framing or plywood. Permit fees and inspection requirements can differ widely by jurisdiction.
Real-World Pricing Examples
Three scenario cards illustrate typical quote ranges for 1100 sq ft.
-
Basic — Asphalt shingles, no deck repair, standard pitch. Specs: 1100 sq ft, 0.45 roof factor, debris disposal included.
- Labor: 2 days, 3 workers
- Materials: basic 3-tab shingles
- Total: $4,800-$6,200
- Assumptions: suburban area, standard climate
-
Mid-Range — Architectural shingles, minor deck inspection, standard venting. Specs: 1100 sq ft, 0.5 pitch, some minor decking work.
- Labor: 3 days, 4 workers
- Materials: architectural shingles
- Total: $7,000-$9,500
- Assumptions: urban or dense suburban market
-
Premium — Impact-resistant shingles, full deck inspection/repair, enhanced underlayment, upgraded warranty. Specs: 1100 sq ft, high pitch in active climate.
- Labor: 4 days, 5 workers
- Materials: premium/impact-resistant shingles
- Total: $10,500-$14,000
- Assumptions: regional high-cost market, disposal complexity
Assumptions: region, specs, labor hours.
Pricing By Region
Regional snapshots show typical differences for a fixed 1100 sq ft roof project. Urban areas often see higher disposal and permit fees and labor rates, while Rural areas may offer savings on labor but incur transport costs for materials. For a 1100 sq ft roof, expect roughly ±10% variation within a region and up to ±20% when comparing distinct markets with different permit requirements and crew availability.
Seasonality & Price Trends
Pricing can shift with seasons and demand. Late spring through early fall is peak roofing season, often leading to higher schedules and potential delays. Off-season installations may offer shorter lead times and occasional discounts, but weather windows can constrain project timing. Plan for possible price adjustments if storms create increased demand in your area.
