Roll up hurricane shutters incur costs driven by size, material, mounting method, and installation labor. This guide consolidates typical price ranges in USD and shows how each factor shifts the total. The focus is on concrete numbers you can use to budget or compare quotes for residential or light commercial projects.

Item	Low	Average	High	Notes
Shutter Kits (per window, standard 4–6 ft wide)	$500	$1,100	$1,800	Includes slats, housing, and locking latches
Materials (aluminum or steel, per sq ft)	$2.50	$4.00	$7.50	Per square foot of installed shutter
Labor (installation, per window)	$350	$750	$1,200	Labor intensity varies by mounting surface
Delivery/Handling	$25	$75	$150	Dependent on distance and quantity
Permits (if required)	$0	$200	$600	Region-dependent
Disposal/Removal of old shutters	$50	$150	$350	One-time charge per project
Warranty (extended)	$0	$100	$300	Adds coverage period and service

Roll Up Hurricane Shutter Costs by Size and Type

Typical total price ranges hinge on window width, shutter system type, and mounting method. A standard residential setup with 4–6 ft wide operable shutters on each window generally falls in the $900–$1,600 per window range when including kit, labor, and basic hardware. Larger openings or multi-channel systems can push totals higher. For per-square-foot pricing, budget roughly $4–$7 per sq ft installed, depending on material and hardware complexity. Assumptions: Midwest labor rates, standard aluminum slat profile, normal access, no custom shaping.

Scenario	Shutter Type	Per Window Total	Per Sq Ft	Notes
Single 6 ft wide, standard aluminum	Manual roll up	$900–$1,400	$4–$7	Includes kit, install, and delivery
Three windows, 5–7 ft widths, steel	Motorized with remote	$2,400–$4,000	$5–$9	Higher motor and wiring costs

Key Cost Components in Roll Up Shutter Quotes

Understanding the four to six primary cost blocks helps compare bids accurately. The major components usually appear as Materials, Labor, Equipment, and Permits, with Delivery/Disposal and Warranty frequently shown as add-ons. The table below demonstrates typical allocations for a mid-size residential job with several 5–6 ft openings.

Component	Low	Average	High	Notes
Materials	$2.50/sq ft	$4.00/sq ft	$7.50/sq ft	Aluminum or steel slats and housing
Labor	$350/window	$650/window	$1,000/window	Includes install and mounting
Equipment	$0–$100	$150	$400	Drills, fasteners, and ladders
Permits	$0	$150	$500	Based on local code
Delivery/Disposal	$25	$75	$150	Distance dependent
Warranty	$0	$100	$300	Low-cost coverage vs full plan

Variables That Change Roll Up Shutter Pricing

The strongest price levers are panel width and system type. A wider opening increases material costs and labor hours. Motorized systems add a durable drive unit, control electronics, and wiring that can double the per-window price versus manual options. Additionally, a higher grade corrosion-resistant finish or upgraded locking hardware can add 10–25% to materials and install time, depending on climate exposure and risk profile. Assumptions: standard installation with a single story, normal access, no structural modification.

Driver	Impact	Typical Range	Examples
Window width	Material + labor	4–6 ft: $900–$1,600	6–8 ft may reach $1,800–$2,800
System type	Hardware + motor	Manual: $0–$600	Motorized: $1,200–$3,000 per window
Region	Labor rate variance	Lower Midwest: -10% to -20%	Northeast: +5% to +15%
Material choice	Base vs premium finish	Standard aluminum: $2.50–$4.00/sq ft	Stainless or fire-rated alloys: $6–$9/sq ft

Ways to Cut Roll Up Shutter Price Without Sacrificing Security

Scope control and material choices directly trim the bill. Consider standardizing to a single shutter profile, limiting motorized units to high-priority openings, and selecting durable but economical aluminum alloys over premium composites. Pre-measured sizes reduce waste, and bundling multiple windows into a single project can lower delivery and site mobilization costs. Delaying nonessential upgrades or fixes until a future project can also reduce upfront fees. Assumptions: typical residential retrofit with existing framing.

Strategy	Expected Savings	Notes
Limit motorized units	10–40%	Use manual for occasional openings
Standardize profile	5–20%	Single slat thickness across openings
Batch install	5–15%	One trip for multiple windows
Delay upgrades	10–25%	Skip premium finishes now

Regional Price Differences for Roll Up Shutters Across U.S. Markets

Prices shift with local labor markets and supply chains. In coastal regions with higher installation risk or stricter codes, expect higher overall costs. The West and Northeast can see 5–15% higher labor rates than the Midwest or South, while remote rural areas may incur additional delivery or access charges. If replacing many windows in a single project, regional pricing makes a meaningful difference in the final quote. Assumptions: standard project of 6–10 windows, single-story home.

Region	Labor Range	Material Range	Typical Total Per Window	Notes
West Coast	$60–$90/hr	$4.00–$7.50/sq ft	$1,000–$1,900	Higher permit and access costs
Northeast	$70–$100/hr	$4.50–$7.50/sq ft	$1,100–$2,100	Code and crane needs optional
Midwest	$50–$75/hr	$2.50–$5.50/sq ft	$900–$1,600	Often best value per window
Southeast	$45–$70/hr	$2.50–$5.00/sq ft	$850–$1,550	Lower utility/permit costs on average

Labor Time and Crew Size for Installing Roll Up Shutters

Installation duration depends on crew size and window layout. A typical crew of two installers can complete 4–8 windows in a day on a single-story home with straightforward framing. Larger openings, multi-story installs, or custom mounting can require 3–4 workers and multi-day scheduling. If a contractor bills hourly, expect roughly 8–12 hours of labor per window for complex cases. Assumptions: standard fastening methods, no structural carpentry required.

Crew Size	Typical Hours per Window	Hourly Rate	Estimated Cost per Window
2 installers	3–6 hours	$60–$90	$180–$540
3 installers	2–4 hours	$60–$90	$120–$360
Single-story, 6 ft widths	4–6 hours	$70	$280

Common Add-Ons and Disposal Costs for Roll Up Shutters

Add-ons can quietly boost the final price if not planned. Typical extras include disposal of old blinds, cutting and shaping for irregular openings, or expedited scheduling. Budget 5–15% of the base project for misc add-ons if the site has tight access or nonstandard framing. Some contractors charge a diagnostic or site-visit fee if no purchase follows. Assumptions: standard old shutter removal and clean-up included.

Add-On	Low	Average	High	Notes
Old shutter disposal	$50	$150	$350	Per window or per project
Site preparation	$0	$100	$300	Access rework or debris removal
Rush scheduling	$0	$150	$500	Within 1–2 weeks

Real-World Quote Examples With Specs and Totals

Concrete samples help set expectations when gathering bids. The following three real-world-like examples illustrate scope, labor hours, per-unit pricing, and total costs for common residential setups.

	Openings	System	Labor Hours	Materials	Delivery	Estimated Total
4 windows, manual aluminum 5 ft each	4	Manual aluminum	14–18	$1,600	$150	$3,200–$3,900
6 windows, motorized 6–7 ft, coastal region	6	Motorized aluminum	22–28	$3,600	$300	$6,000–$8,200
8 windows, standard sizes, single-story with permits	8	Manual aluminum	30–40	$4,000	$500	$7,000–$9,500

Notes on quotes: totals reflect kit, basic hardware, install labor, delivery, and typical permitting where applicable. Regions with higher labor costs or unusual openings will trend toward the high end of ranges. Assumptions: standard framing, no structural reinforcement required.