Redwood cost varies by product, grade, and region. Typical buyers pay for raw lumber, finished decking, or siding with price influenced by size, treatment, and delivery. This article outlines real cost ranges in USD to help budget for a Redwood project, from basic boards to complete installations.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Redwood lumber price per board foot | $3.50 | $4.50 | $7.00 | Clear stock and select grades cost more |
| Redwood decking price per sq ft | $5.50 | $7.50 | $9.50 | Includes boards and basic fasteners |
| Redwood siding price per sq ft | $7.00 | $9.00 | $12.50 | Shakes or shiplap vary by profile |
| Redwood fencing price per linear ft | $18.00 | $26.00 | $40.00 | Includes posts, rails, and posts setting |
| Delivery charges | $75 | $180 | $400 | Distance dependent |
Redwood Lumber Prices by Board Foot and Size
Woodyard pricing for common redwood boards shows a broad range per board foot depending on grade, moisture content, and whether the material is kiln-dried. Expect higher costs for clear or select grades and for longer lengths. Typical residential sizes include 2×6, 2×8, and 4×4 components, priced to reflect lumber maturity and availability in the West Coast versus other regions.
Assumptions: Midwest and Pacific regions, standard moisture content, ship-to-site delivery, and normal access.
Decking Redwood: Per Square Foot and Board Count
Redwood decking pricing combines board cost with hidden expenses such as fasteners, sealant, and basic framing. Decking costs often hinge on profile (classic bevel vs square edge) and whether premium UV protection is added. A typical 10×12 ft decking project will show both per-square-foot pricing and a board-count calculation to estimate waste and fitting needs.
Assumptions: standard 5/4 deck boards, hidden fasteners optional, typical local labor in a temperate climate, mid-grade boards.
Redwood Siding Costs by Square Foot and Type
Redwood siding pricing varies with profile (batten, bevel, board-and-batten), finish, and thickness. Rough-sawn or edge-grain varieties cost more to install but may offer a distinct look and weather resistance. When budgeting, consider sealant or primer as separate line items and note regional demand impacts in the pricing table.
Assumptions: exterior siding installation in suburban markets, standard primer and sealant, mid-grade boards, normal weather window for exterior work.
Fencing Redwood Costs by Linear Foot and Style
Redwood fencing combines board cost with posts, caps, and hardware. Linear-foot pricing is common for color-treated or natural finishes, with higher costs for custom heights or curved sections. For a typical 6-foot privacy panel, estimate boards, posts sunk into concrete and end caps plus fasteners as part of the total.
Assumptions: straight runs, standard post spacing, basic anchorage into soil, and no special finishes beyond stain.
Labor and Freight Add-Ons for Redwood Projects
Labor rates for Redwood work vary by region and crew experience. A simple install might run as low as $35-$70 per hour per worker, while skilled carpenters with specialty finishes push toward $90-$125 per hour. Freight can add $75-$400 depending on distance and volume. Use a small formula to estimate labor time: .
Assumptions: standard eight-hour workdays, normal site access, and typical crew composition for residential projects.
Key Variables That Raise or Lower Redwood Quotes
Final quotes depend on several concrete factors. Clear grades, moisture content, and board length thresholds are major drivers. Regional demand and delivery distance also shift the price, as do seasonal supply constraints. A 6-inch-wide redwood board versus a 1×6 can differ significantly in per-foot cost, and longer spans increase waste and labor time.
Assumptions: a mid-sized urban market, standard permit considerations, and standard protective finishes.
Ways to Cut Redwood Costs Without Compromising Quality
Cost-conscious buyers can control scope and materials. Choose mid-grade boards, reduce waste with exact cutting plans, and schedule during off-peak seasons when crews and material are more available. Bundling siding and decking projects with the same supplier can yield bulk discounts, while opting for pre-finished boards may reduce onsite labor even if the upfront price is higher.
Assumptions: no custom milling, no expedited delivery, standard tools and finishes.
Projected Totals: Typical Redwood Projects by Scope
This section provides practical totals for common scenarios, helping buyers compare bids. Each scenario includes a rough range of materials plus estimated labor and delivery costs, with notes about assumptions and regional variation.
Note: All dollar amounts reflect U.S. pricing and are intended as budgeting guidance rather than fixed quotes. Prices can vary by supplier and market conditions.
| Scenario | Low Total | Average Total | High Total | Assumptions |
|---|---|---|---|---|
| 2×6 Redwood deck, 200 sq ft, mid-grade boards | $1,600 | $2,600 | $3,800 | Includes boards, fasteners, sealant, labor, delivery |
| Redwood siding, 800 sq ft, bevel profile | $5,600 | $8,400 | $11,200 | Mid-grade boards, primer included |
| Fence installation, 150 ft, privacy panels | $2,900 | $4,600 | $6,800 | Posts set in concrete, standard rails |
| Redwood lumber bundle, 1,000 board feet | $3,500 | $4,800 | $7,000 | Mixed select grades, standard moisture |
Regional Differences in Redwood Cost
Price dispersion is common across the U.S. West Coast versus the Midwest and Southeast due to supply chains and regional demand. Coastal markets often show higher per-board costs but may offer better availability of high-grade Redwood. Budget-aware buyers should compare multiple regional suppliers and consider delivery options to minimize total expense.
Materials Substitutes and Practical Tradeoffs
If Redwood options stretch the budget, consider alternates like pressure-treated pine or cedar. Tradeoffs include color retention, weather resistance, and maintenance frequency. For some projects, a hybrid approach—Redwood where weather exposure is highest and cheaper species elsewhere—can balance aesthetics with total cost.
Summary: Redwood Cost Snapshot for Budget Planning
Redwood pricing spans several categories: lumber, decking, siding, and fencing. Expect per-unit swings based on grade, length, and finish, with regional transport shaping the final quote. The cost drivers most worth monitoring are material grade, board length, and installation scope, followed by delivery distance and seasonal demand.
Assumptions: U.S. markets, standard finishes, normal weather windows, and typical residential projects.
