Homeowners typically spend between $600 and $2,600 to replace a range hood, with costs driven by hood type, ductwork, and installation complexity. The price you pay includes the unit itself, delivery, labor, and any required permits or ventilation work. This guide breaks down the typical cost, key drivers, and ways to save on a range hood replacement.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Unit price (new range hood) | $150 | $350 | $1,200 | Ducted vs ductless, CFM, features |
| Labor | $120 | $480 | $1,200 | Install time 2–8 hours |
| Electrical & wiring | $0 | $150 | $600 | Outlet, circuit check, wiring |
| Ventilation work | $0 | $200 | $900 | New duct, duct rerouting |
| Permits & inspections | $0 | $50 | $300 | Depends on locality |
| Delivery/Removal & disposal | $20 | $60 | $200 | Old hood disposal |
| Warranty & extras | $0 | $50 | $150 | Extended warranty options |
Overview Of Costs
Cost ranges reflect typical scenarios for a standard kitchen, including installation of a ceiling-height hood or under-cabinet model. The total project spans from approximately $600-$2,600 depending on ducting needs, hood type, and labor. A ducted, high-CFM model with a long duct run and electrical wiring will sit toward the higher end, while a ductless, compact unit in a straightforward install clusters around the lower end. Assumptions: standard ceiling height, 110–120V electrical supply, and no custom cabinetry work.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $150 | $350 | $1,200 | Unit price varies by CFM, ducting, and finish |
| Labor | $120 | $480 | $1,200 | Install crew time; includes mounting, wiring |
| Equipment | $0 | $50 | $200 | Tools, mounting hardware |
| Permits | $0 | $50 | $300 | Location-dependent |
| Delivery/Disposal | $20 | $60 | $200 | Old hood haul-away |
| Warranty | $0 | $50 | $150 | Optional |
| Taxes & Overhead | $0 | $40 | $100 | Site-specific |
Factors That Affect Price
Ventilation type and ducting are the biggest price levers. A ducted hood with a long run and sharp bends will cost more than a simple ductless unit. Key drivers include hood size (width) and CFM, duct length, and the existing electrical setup. HVAC-grade installation or high-end finishes can push the price higher, while standard 30–36 inch under-cabinet units with short ducts stay in the lower range. Other drivers include ceiling height, cabinet compatibility, and whether any demolition or cabinetry adjustment is needed. data-formula=”labor_hours × hourly_rate”>
Ways To Save
Choose standard sizes and install locations to minimize custom fabrication. Compare ducted vs ductless models where feasible, as ductless often reduces ductwork and permitting costs. If wiring is already nearby, labor costs drop; otherwise, expect higher electrical work. Bundling the hood with a sale or using a mid-range model with reliable performance can balance cost and value. Consider replacements in the off-season when retailers run promotions.
Regional Price Differences
Regional variations matter for range hood costs. In the Northeast, labor and permit costs can add 10–20% versus the West, while the Midwest may be 5–15% lower due to lower overhead. Urban areas typically incur higher delivery and disposal fees, whereas rural installations may have longer travel times but lower hourly rates. Expect total project deltas of roughly ±10% across regions depending on ducting complexity and local codes. Assumptions: regional labor rates, permit requirements, and typical install complexity.
Labor, Hours & Rates
Labor is frequently the largest variable. A straightforward under-cabinet ductless install may require 2–4 hours, while a full ducted, high-CFM system with duct rerouting may take 6–8 hours or more. Typical hourly rates range from $60 to $120, depending on region and contractor experience. A high-end installation with ceiling mounting and custom cabinetry work can exceed 8 hours. data-formula=”hours × rate”>
Real-World Pricing Examples
Basic — 30″ ductless under-cabinet hood, simple electrical connection, no ductwork: hood $150, labor $120, permits $0, delivery $40, total around $310.
Mid-Range — 30–36″ ducted hood with short run, basic duct, standard install: hood $300, labor $480, ducting $200, permits $50, disposal $60, total around $1,090.
Premium — 42″ stainless steel, high-CFM, long duct run with bends, ceiling height adjust, electrical upgrades: hood $1,000, labor $1,000, ducting $600, permits $300, disposal $100, warranty $100, total around $3,100.
Assumptions: region, specs, labor hours.
