In Denver, typical radon mitigation projects cost a range that depends on home size, foundation type, and system configuration. The main price drivers include fan power, number of suction points, and labor time. The following figures help buyers estimate a budget before obtaining quotes.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| System installation | $1,200 | $2,100 | $3,600 | Includes fan, piping, and one vent point |
| Per-square-foot estimate | $0.70 | $1.10 | $1.80 | Assumes mid-range system for typical 1,800–2,500 sq ft |
| Electrical work | $150 | $400 | $800 | Fan power and conduit |
| Permits & inspections | $50 | $250 | $600 | Varies by municipality |
| Delivery/ disposal | $50 | $150 | $400 | Materials transport and any waste handling |
| Warranty / workmanship | $0 | $150 | $350 | Limited vs extended options |
Overview Of Costs
Radon mitigation cost ranges in Denver commonly fall between $1,200 and $3,600. Most homes see costs in the $2,000–$2,800 range when a single suction point suffices and the crawlspace or basement layout is straightforward. Assumptions: single-family residence, standard concrete slab or basement layout, mid-range fan. Assumptions: region, scope, and labor hours.
Cost Breakdown
The following table breaks down typical price components for Denver radon mitigation projects. Assumptions: average home features, standard installation practices.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $800 | $1,400 | $2,200 | Fan, PVC piping, seals |
| Labor | $600 | $1,100 | $1,900 | Installation crew hours |
| Equipment | $0 | $250 | $500 | Tools, monitoring devices |
| Permits | $50 | $200 | $600 | Local requirements |
| Delivery/ Disposal | $20 | $100 | $250 | Material handling |
| Warranty | $0 | $150 | $350 | Workmanship/parts |
| Contingency | $0 | $100 | $300 | Unforeseen issues |
| Taxes | $0 | $100 | $200 | State/local tax |
What Drives Price
Key price drivers include the system’s suction point count, fan horsepower, and the complexity of routing piping through living spaces. In Denver, homes with basements and multiple bedrooms often require two or more suction points, increasing both materials and labor.
Other important factors are foundation type (slab vs. crawlspace), attic access, and the presence of multiple living levels. A typical high-driving scenario is a two-story home with a crawlspace and a lengthy trench or chase for piping. data-formula=”labor_hours × hourly_rate”>
Regional Price Differences
Prices in Denver can differ from nearby markets due to labor rates and permit costs. Urban Denver may be about 5–15% higher than rural areas for similar projects.
- Urban core: higher permit fees and access challenges
- Suburban: balance of labor cost and ease of installation
- Rural: lower labor rates but potential travel charges
Labor, Hours & Rates
Typical installation time ranges from 4–12 hours, depending on layout and access. Smaller homes with straightforward basements often fall on the lower end.
Hourly rates commonly run $75–$150 in the Denver area. Expect higher rates if longer runs or specialized drilling is required. Assumptions: crew size and job complexity.
Additional & Hidden Costs
Some projects incur extra fees that aren’t obvious at first glance. Common add-ons include after-hours work, balcony or deck penetrations, or concrete cutting.
- Deck or patio cutting for piping
- Electrical panel upgrades if required
- Post-install verification tests or radon counters
Real-World Pricing Examples
The following scenario cards illustrate typical quotes in Denver settings. Assumptions: single-family, mid-range home, standard layout.
Basic Scenario
Specs: 1,600 sq ft, single suction point, slab foundation, standard fan. Assumptions: region, basic setup, ~6 hours labor.
Labor hours: 5–6; Materials: $900; Total: $1,450–$2,100; $/sq ft: $0.90–$1.31
Mid-Range Scenario
Specs: 2,100 sq ft, two suction points, basement + slab, mid-range fan. Assumptions: region, standard runs, typical access.
Labor hours: 8–10; Materials: $1,250; Total: $2,000–$2,900; $/sq ft: $0.95–$1.38
Premium Scenario
Specs: 2,800 sq ft, three suction points, two stories, challenging routing, premium fan. Assumptions: region, complex install, potential permit variances.
Labor hours: 12–14; Materials: $1,900; Total: $3,400–$4,800; $/sq ft: $1.21–$1.71
Pricing FAQ
What is the typical minimum cost for radon mitigation in Denver? Most jobs start around $1,200–$1,400 for very simple setups.
Does a larger home always cost more? Generally yes, but layout and foundation type can drive more than size alone.
Are permits required? In many Denver jurisdictions, a permit is recommended or required; costs vary by city.
Assumptions: region, specs, labor hours.
