Prices for quick set cement depend on size, mix type, and installation conditions. This article presents cost ranges in USD, including per-unit pricing where relevant, to help buyers budget with confidence. Read on for concrete numbers, drivers, and ways to reduce the bill without sacrificing performance.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Bagged quick set cement (94 lb bag) | $8 | $12 | $16 | Typical bags for small patches |
| Per-square-foot pour (4-inch slab) | $4.50 | $6.50 | $9.50 | Materials only |
| Delivery fee (regional) | $25 | $60 | $120 | Dependent on distance |
| Labor per hour (poured sections) | $40 | $60 | $85 | Based on crew skill |
| Site prep and base (gravel, compaction) | $0.50 | $2.50 | $6 | Per sq ft of area prepped |
Assumptions: Midwest labor rates, standard 94 lb bags, normal access, residential slope modesty, and typical 2–4 inch thickness for patches or small slabs.
What Buyers Typically Pay for Quick Set Cement by Project Size
Quick set cement costs range widely by project size. For a small patch or repair, total costs usually fall in the $50-$250 range, including mix, bags, and minor labor. For a typical 4×4 foot slab at 4 inches thick, expect $300-$700 in materials and labor combined, depending on location and access. Larger driveways or interior slabs can reach $1,200-$2,800 for materials and professional application. Assumptions: standard mix, normal access, and two-person crew.
Major Cost Components in Quick Set Cement Quotes
The quote breaks down into concrete materials, labor, and site costs. Materials cover quick set cement mix, water, and any bonding agents. Labor accounts for crew size and time to mix, place, and finish. Delivery/Disposal includes truck transport and any disposal of old material. A compact comparison table appears below to illustrate typical ranges. Assumptions: standard residential access, normal weather, no permit fees.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $8-$14 per bag | $12-$20 per bag | $18-$28 per bag | 94 lb bags; mix variety affects cost |
| Labor | $40 per hour | $60 per hour | $85 per hour | One-inch to two-inch concrete finish work |
| Delivery/Delivery | $25 | $60 | $120 | Distance dependent |
| Site prep | $0.50 per sq ft | $2.50 per sq ft | $6 per sq ft | Includes leveling and compaction |
Labor and Materials Breakout for Quick Set Cement Per Job
Labor and materials typically form the largest share of the price, especially for larger patches or slabs. Per-square-foot costs reflect both the material and the crew time for finishing. For a 4×6 foot patch at 3 inches thick, expect about $180-$420 for materials and $120-$260 for labor, totaling roughly $300-$680. Assumptions: standard mix, level finish, two-person crew.
Regional Price Variations Across the United States for Quick Set Cement
Prices shift with labor markets and transportation. In the Mountain states, you might see $0.25-$0.75 per square foot lower on modest projects than in the Northeast. A small repair in the South could run toward $60-$120 for labor plus materials, while a coastal city project can push the total toward $1,000-$2,000 for mid-size slabs. Regional delta commonly tied to fuel, crew availability, and permit requirements.
Size, Mix Type, and Job Scope Drive Quick Set cement Price
Higher strength or rapid-set mixes cost more per bag but save time. A standard 94 lb rapid-set bag might be $12-$18 versus $8-$12 for a regular mix. For a 6×6 foot slab at 4 inches, a rapid-set alternative could add $150-$300 on top of base costs but reduce curing time by hours. Size and scope directly affect bag counts and labor hours.
Common Add-Ons and Disposal Costs for Quick Set Cement
Prep work like removing existing material and hauling debris adds to the bottom line. A typical disposal fee ranges $25-$100 per load, while surface prep can add $0.50-$2.00 per sq ft. Deliveries in tight urban zones may incur $30-$60 extra for access charges. Skip unnecessary disposal if patching is feasible; bundling with other nearby projects can reduce per-unit costs.
Ways to Cut Quick Set Cement Costs Without Compromising Quality
Small changes to scope can yield meaningful savings. Limit scope creep by framing exact patch size and finish type. Choose a standard mix instead of specialty formulations when appropriate. Schedule jobs during off-peak seasons to lower labor rates, and compare quotes from at least two contractors. Seasonal demand can swing prices by ±15-25% in some markets. Assumptions: weather permitting, no emergency fills.
Unit Price Benchmarks: Per Bag and Per Square Foot for Quick Set Cement
Per-bag pricing is the most common unit metric for small jobs, with typical ranges $8-$16 per 94 lb bag. Per-square-foot pricing for flat slabs generally falls in the $4-$9 range, depending on thickness and finish. For a 2-inch slab over 100 sq ft, expect $400-$900 in total, including material and labor. These benchmarks help compare bids quickly across regions.
Assumptions: standard residential concrete patch scenarios, normal weather, and compliant access for trucks and equipment.
Additional Quote Examples and Real-World Comparisons
Two practical examples illustrate how prices change with scope. Example A covers a 4×4 foot patch at 2 inches thick in a suburban setting: materials $60-$90, labor $120-$180, delivery $25-$60, total $205-$330. Example B covers a 6×8 foot slab at 4 inches in a regional city: materials $180-$260, labor $420-$620, site prep $40-$120, delivery $40-$90, total $680-$1,090. Prices reflect typical market ranges and standard finishing; defects or high-access conditions raise costs.
Assumptions: standard mixes, two-person crews, no permits required, normal access.
