Typical power washing of a residential driveway costs between $120 and $350, depending on driveway size, surface material, and stains. Main cost drivers include surface area, cleaning method, equipment used, and whether additional services or repairs are needed. This guide provides clear low–average–high ranges and practical pricing to help buyers estimate a project budget.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Power Wash Service | $120 | $210 | $350 | Includes cleaning solution and rinse; stain presence increases cost |
Overview Of Costs
Total project ranges typically reflect driveway size and surface type. For most homes, a standard concrete driveway measures 400–600 square feet. Expect per-square-foot pricing around $0.28–$0.75/sq ft when billed as a full service. Assumptions: region, driveway material, and stain level.
Cost Breakdown
Breakdown helps map where money goes: materials, labor, and equipment.
| Category | Low | Average | High | Notes | Typical Unit |
|---|---|---|---|---|---|
| Labor | $60 | $110 | $260 | Hourly rates vary; larger driveways require more hours | per project |
| Equipment | $20 | $40 | $80 | High-pressure machines, surface-safe nozzles | per project |
| Materials | $0 | $15 | $60 | Cleaning solutions, degreasers; staining may add | per project |
| Permits | $0 | $0 | $30 | Generally not required for typical residential work | per project |
| Delivery/Disposal | $0 | $5 | $25 | Disposal of runoff or wastewater handled by pro | per project |
What Drives Price
Key price levers include driveway material, stain level, and access constraints. Concrete and pavers respond differently to cleaning time; asphalt may require gentler methods. Heavily stained surfaces, oil spots, or biological growth increase chemical use and labor hours. Access constraints, such as gated driveways or overhead lines, can add equipment setup time.
Ways To Save
Simple tactics can shrink the bill without risking results. Ask for a bundled service if you need sealing or sealing recurring maintenance. Schedule during off-peak seasons or weekdays to lower labor costs. If stains are minor, consider a wash without chemical boosters; otherwise, request a targeted treatment first to gauge effectiveness.
Regional Price Differences
Prices vary by market; regional differences can shift totals by approximately ±20–30%. In the Northeast urban areas, higher labor costs push up pricing compared with the Midwest suburban markets, while rural regions tend toward the lower end of the spectrum due to lower operating expenses.
Labor, Hours & Rates
Labor is the largest driver for most projects. Typical residential driveways require 1–4 hours depending on surface and contamination. Local rates commonly range from $60–$120 per hour for a crew, with senior technicians at the higher end.
data-formula=”labor_hours × hourly_rate” style=”display:none”>
Real-World Pricing Examples
Three scenario cards illustrate common outcomes.
Basic
Driveway: 350 sq ft concrete; minimal staining; access easy. Labor: 1.5 hours; Equipment: standard pressure washer; Materials: basic cleaner. Assumptions: single story home, no sealant.
- Labor: $90
- Equipment: $25
- Materials: $10
- Total: $125
Mid-Range
Driveway: 450 sq ft concrete; oil spots present; access moderate. Labor: 2.5 hours; Equipment: upgraded nozzle; Materials: degreaser. Assumptions: standard removal of mild stains.
- Labor: $225
- Equipment: $40
- Materials: $25
- Taxes: $10
- Total: $300
Premium
Driveway: 600 sq ft stamped concrete; heavy staining; gated access with extended setup. Labor: 4–5 hours; Equipment: specialty nozzles; Materials: stain pretreatment. Assumptions: frequent maintenance required.
- Labor: $420
- Equipment: $70
- Materials: $60
- Permits/Taxes: $20
- Total: $570
