Homeowners typically pay for poured concrete landscape edging by the linear foot, including form setup, concrete, and finishing. Main cost drivers are length, thickness, finish style, and local labor rates. The price ranges below reflect common residential installations in the United States and assume standard landscaping access and mid-range material quality.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed cost per linear foot | $8 | $12 | $40 | Includes materials, labor, and basic finish |
| Typical project size (linear ft) | 20–40 ft | 50–150 ft | 200+ ft | Longer runs raise total cost due to setup |
| Material cost per cu yd (concrete) | $150–$180 | $170–$210 | $230–$280 | Depends on mix and additives |
| Labor time (hours per 100 ft) | 4–6 | 6–12 | 15–25 | Includes finishing and cure time |
| Formwork/edge mold cost | Included | Included | Optional upgrades | Simple forms usually included in base price |
Assumptions: Midwest labor rates, standard concrete mix, normal access, and a 4-inch thick edge with a simple rounded profile.
Exact cost for poured concrete landscape edging
Expect a wide range per linear foot due to thickness, profile, and finish. For most residential projects, plan for $12-$20 per linear foot for standard 4-inch thickness and a basic slip-form finish. More decorative or thicker edging, such as 6 inches with a textured finish, can push costs to $28-$40 per linear foot. A small, simple border under 40 ft might land in the $350-$800 range, while larger borders near 100 ft commonly fall between $1,200 and $2,000. Assumptions: standard residential grade, single pour, no major site obstacles.
Major cost components in a concrete edging quote
Breaking out the quote helps compare value across bids. A typical breakdown includes Materials, Labor, Equipment, and Permits/Delivery. Materials usually cover concrete mix and forms, while Labor includes site prep, form setup, pouring, and edging finishing. Equipment accounts for tools like mixer rental or pump if needed. Delivery or disposal adds fees if the site is far from a plant or requires haul-away. The table shows representative ranges for a 60 ft run.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2.40 | $3.50 | $6.00 | Per linear ft for 4-inch thick edge |
| Labor | $6.00 | $9.50 | $18.00 | Includes prep, pour, finish |
| Equipment | $1.00 | $2.50 | $4.00 | Mixer, forms, minor machinery |
| Permits/Delivery | $0.50 | $1.50 | $3.50 | Local規制 and delivery fees |
| Subtotal (per ft) | $9.90 | $16.50 | $31.50 | |
| Total for 60 ft | $594 | $990 | $1,890 | Assumes standard scope |
Assumptions: Midwest-based crew, standard 4-inch edge, basic finish, no reinforcing steel beyond mesh for control joints.
Variables that shift the price for slab-style edging
Small changes in thickness, length, or finish create noticeable price swings. Key drivers include edge thickness (4″ vs 6″), run length, and finish complexity (smooth vs textured, color add-ins). Regional wage differences can add or subtract several dollars per linear foot. For example, a 60 ft run at 4 inches with a smooth finish may stay within $12-$18/ft, while the same run at 6 inches with a textured finish could rise to $28-$40/ft. A 100 ft run under the same conditions expands roughly to $1,200-$3,000 in total. Assumptions: single pour, standard grade concrete, typical residential soil.
How project scope affects per-foot pricing
Scope changes matter more than most homeowners expect. Adding curves, rounded corners, or a deeper edge increases labor and form complexity. If the project grows from 50 ft to 150 ft, per-foot pricing can drop slightly due to batch efficiency, but total cost rises due to extra material and labor. A good rule: for 50–100 ft, expect $12-$22/ft; for 100–200 ft, $10-$18/ft on average with bulk-form savings. In high-demand seasons, rates may edge upward by 5–15%. Assumptions: mid-grade finish and no reinforcements beyond standard control joints.
Regional price variations for concrete edging across the U.S.
Markets differ widely by region, which affects concrete edging prices. In the Northeast and West Coast, labor and permitting can push base pricing higher, while the Midwest and certain Southern regions may run at or below national averages. A typical regional delta is about ±20% from the national average. For a 60 ft run, coastal markets might see $14-$22/ft, while inland regions could be $11-$18/ft. A 120 ft project may range from $1,320 to $2,160 depending on region and access. Assumptions: standard weather, no frost-heave considerations, moderate emergency scheduling.
Ways to reduce the poured concrete edging bill
Practical steps help keep price predictable without sacrificing stability. Limit scope by shortening runs, choose a simpler profile, reuse existing forms, and avoid decorative stamps or color pigments. Consider a single pour with a consistent thickness rather than multiple pours or transitions. Schedule in a non-peak season and compare at least three bids. Bundling edging with adjacent concrete or landscaping work can yield a modest discount. Assumptions: standard site conditions, no structural replacements, no expedited timelines.
Add-ons, prep work, and common hidden fees
Prep and ancillary charges often surprise buyers. Common add-ons include grading and trenching, soil stabilization, root removal, and backfill around the edging. Prep work can add $2-$5 per linear foot, while disposal fees may apply if old edging is broken out. If a contractor uses a pump or extra-form setup, expect an additional $1-$3/ft. Permit fees or HOA review sometimes add 0.5–2% of project cost. Assumptions: typical yard access, standard soil, no zoning obstacles.
