Buyers typically see a wide spread in price for PGT impact French doors, driven by size, glass type, frame finish, and installation complexity. The cost focus below covers typical U.S. pricing, with clear low, average, and high ranges to help form an estimate or budget. The price discussion uses per unit and per project figures where relevant.
Assumptions: region, specs, labor hours.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door unit price (frame, glass, hardware) | $2,800 | $4,000 | $6,000 | Standard 6’8″ x 8’0″ set with impact glass |
| Installation labor | $1,000 | $2,000 | $3,200 | Labor for removal, prep, and hinge/lock setup |
| Permits & codes (if required) | $0 | $300 | $900 | Depends on locality |
| Delivery and disposal | $150 | $350 | $700 | Distance and disposal rules vary |
| Finishes & hardware upgrades | $100 | $500 | $1,000 | Color matched hardware, multi-point locks |
| Warranty & service plan | $0 | $150 | $350 | Yearly or multi-year options |
| Subtotal before contingencies | $4,050 | $7,250 | $11,150 | Excludes tax, permits beyond listed |
| Contingency (design/fit issues) | $200 | $600 | $1,200 | Typically 5–10% of subtotal |
| Tax | $0 | $500 | $1,200 | Depends on state and local rate |
| Total project price | $4,250 | $8,350 | $13,550 | Assumes standard opening and one-unit setup |
Overview Of Costs
The price range for PGT impact French doors reflects materials, glass performance, and installation complexity. Typical total project ranges are roughly $4,000 to $13,000 for a standard pair, depending on opening size and upgrades. On a per-square-foot basis, expect about $600 to $1,350 per sq ft for larger or premium configurations. Window and door installers often quote per unit or per opening, with higher costs for taller or wider doors and for special glass coatings.
Cost Breakdown
Table shows the main cost components and the typical share of the total. The figures assume a standard double-door unit and basic finish with impact glass. Higher-end panes, decorative grilles, or custom finishes push the price above the ranges shown.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2,800 | $4,000 | $6,000 | Frame, impact glass, hardware |
| Labor | $1,000 | $2,000 | $3,200 | Removal, install, seal, adjust |
| Permits | $0 | $300 | $900 | Local regulations |
| Delivery/Disposal | $150 | $350 | $700 | Site distance matters |
| Finishes/Upgrades | $100 | $500 | $1,000 | Color, handles, grille options |
| Warranty/Service | $0 | $150 | $350 | Plan options |
| Taxes | $0 | $500 | $1,200 | State/local rate |
Pricing Variables
Several factors drive price differences. Door size and configuration matter: wider or taller doors require more material and more installation time. Glass type and impact rating affect both cost and performance. Regional labor rates and permit costs can shift totals by 10–30% between markets. Energy performance features, such as low-E coatings or triple glazing, add to the price but save on long-term energy bills.
Ways To Save
Smart shopping can reduce the overall spend without sacrificing performance. Bundle purchase and installation when possible to secure a bundled discount. Consider standard hardware and finishes rather than premium custom options. If the project allows, schedule installation in off-peak seasons to leverage lower labor rates in some markets.
Regional Price Differences
Prices vary by market. In the Northeast, higher construction costs and stricter codes can push up totals by about 8–15% relative to the national average. In the Southeast, material availability and labor may keep averages closer to the baseline. Rural areas often feature lower delivery and labor charges, sometimes reducing totals by 5–12% compared with urban centers. Regional adjustments should be considered when budgeting for a PGT impact French door project.
Labor, Hours & Rates
Labor costs are a major portion of the total. Typical installation time for a standard pair is 6–12 hours depending on opening conditions, with crew rates ranging from $75 to $150 per hour. For complex openings or custom frames, installation can extend to 16 hours or more at higher rates. A basic local estimate will include removal of old hardware, frame prep, and precise alignment to meet weather and security standards.
Additional & Hidden Costs
Hidden or extra charges can appear. Site prep and framing adjustments may require structural work. If electrical work or sensor integration is needed for smart features, expect additional costs. Hidden costs also include long-distance delivery surcharges and disposal fees for old doors.
Real-World Pricing Examples
Scenario cards give practical context. Each card uses different assumptions to illustrate typical totals.
- Basic — Standard 6’8″ x 8’0″ unit, mid-range glass, basic hardware; 8 hours labor; total around $5,000–$6,500 with minimal extras.
- Mid-Range — Standard unit with upgraded hardware and better glass, moderate finish options; 10–12 hours labor; total about $7,500–$9,500.
- Premium — Wide or tall opening, premium finishes, advanced energy glass, decorative grilles; 14–16 hours labor; total roughly $11,000–$15,000.
Price By Region
Regional example deltas: in the Midwest, typical totals skew near the national average with modest adjustments. In the West, higher labor costs can add 5–12% to totals. In the South, permit and delivery variability can push prices up or down by 3–10%. These regional factors should be incorporated into the bid process for PGT impact French doors.
FAQ
Q: Do I need a permit for installing impact French doors? A: Often yes in many jurisdictions; whether required and the cost depends on local codes. Q: Can I install this myself? A: DIY is possible for some formats but most projects require licensed installers for warranty and code compliance. Q: What adds the most cost? A: Size, glass type, and installation complexity typically have the largest impact on price.
