Prices for doors installed in a single day typically cover new door units, hardware, and labor for quick completion. The main cost drivers are door type, material, size, frame work, and whether trimming or painting is needed.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door Unit | $120 | $250 | $600 | Interior hollow core or exterior prehung |
| Hardware & Trim | $60 | $150 | $350 | knobs, hinges, latch, weatherstripping |
| Labor (1 day) | $120 | $350 | $700 | Includes removal and installation |
| Frame & Rough Opening | $50 | $175 | $420 | Adjustments may add time |
| Finishing (Paint/Stain) | $40 | $120 | $260 | Only if required by job |
| Delivery/Removal | $20 | $60 | $150 | Based on distance and debris haul |
| Permits & Fees | $0 | $50 | $200 | Region dependent |
| Tax & Overhead | $10 | $40 | $100 | Varies by locality |
Assumptions: one day window, standard 80 in height door, single opening, typical interior or exterior prehung door, minor framing adjustments.
Overview Of Costs
The overall project ranges from about $360 to $2,420 for a single door installed in one day. A typical interior door with standard hollow core construction and basic hardware sits in the mid range, around $250 to $550 for the door unit plus $350 to $700 for labor. Exterior doors tend to push higher due to weatherproofing and security hardware, often totaling $900 to $2,000 including installation.
Per door pricing often appears as a package: door unit plus labor per hour or per job. The exact total depends on door type, size, frame work, and finishing needs.
Cost Breakdown
| Materials | Labor | Permits | Delivery/Disposal | Warranty | Taxes |
|---|---|---|---|---|---|
| $120–$600 | $120–$700 | $0–$200 | $20–$150 | $0–$200 | $0–$100 |
What Drives Price
Door type and material set the base cost, with interior hollow core doors being cheaper than solid wood or steel options. Prehung versus slab doors affect labor time, as prehung units simplify installation. Size and frame work influence both materials and crew hours, especially if the rough opening requires shimming or re-framing.
Additional drivers include hardware quality, weather sealing, paint or stain requirements, and whether specialty finishes are needed to match decor. Regional price differences and seasonal demand can create short term variances in both materials and labor rates.
Ways To Save
Choose standard sizes and common materials to minimize custom framing and trim work. Bundle multiple doors or schedule in off peak times for potential discounts. Self-remove old doors when feasible to reduce disposal costs.
Regional Price Differences
Prices vary by region due to labor markets and material availability. In the Northeast, expect higher labor rates with moderate material costs. In the Midwest, lower labor costs can offset modest material variances. In the West, premium exterior hardware and weatherproofing can push totals higher. Regional delta often ranges ±15 to 30 percent from national averages depending on location and project scope.
Labor & Installation Time
A one day install typically encompasses removal of the old door, frame checks, and new door hanging. Install time averages 4–8 hours for a single door with standard hardware, but complex trim or reframing can extend this window. If two installers are used, labor costs may rise but total time can drop.
Real World Pricing Examples
Assumptions: region, standard 80 in door, basic hardware, no major framing work.
Basic Door: hollow core interior, standard knob, no finishing
Specs: 1 door, 80 in x 30 in, no repaint
Labor: 4–5 hours
Per unit: $100–$180 door, $120–$250 labor
Total: $360–$550
Mid-Range Door: solid core exterior capable, brushed hardware, weatherstripping
Specs: 1 door, 80 in x 36 in, frame work
Labor: 5–7 hours
Per unit: $300–$520 door, $250–$500 labor
Total: $900–$1,420
Premium Door: steel or solid wood, premium hardware, custom finish
Specs: 1 door, 80 in x 40 in, extensive trim
Labor: 6–8 hours
Per unit: $600–$1,200 door, $350–$700 labor
Total: $1,200–$2,420
Additional & Hidden Costs
Hidden costs may include asphalt shingle overlay or door frame repair after removing the old unit, as-is disposal services, and permit fees if required by local code. Some jobs incur extra charges for stairs, tight spaces, or multi-point locking systems. Always confirm whether finishing, painting, or staining is included in the quoted price.
