Buying a new stove typically costs between $500 and $2,500, depending on fuel type, size, and features. This article outlines typical cost ranges and price drivers for U.S. buyers. Cost factors like installation, delivery, and warranties can shift totals.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Stove Purchase | $500 | $1,200 | $2,500 | Gas vs electric; features vary |
| Delivery | $0 | $50 | $150 | Some retailers offer free delivery |
| Installation (Gas) | $100 | $250 | $600 | Gas line, venting, and hook-up complexity |
| Electrical/Plumb | $75 | $150 | $350 | Outlet upgrades or 240V circuit may be needed |
| Permits & Inspect | $0 | $50 | $300 | Local rules may apply for gas lines |
Overview Of Costs
Typical cost range for a complete stove replacement is $1,000–$2,800, depending on fuel type, size, and installation requirements. The per-unit price often reflects features like convection cooking, self-cleaning, and smart controls. Assumptions: standard 30-inch width, residential kitchen, typical remodeling constraints.
Cost Breakdown
Table below shows primary cost components and typical ranges. The totals combine a stove purchase with basic delivery and installation. Use per-unit pricing where shown.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $0 | $0 | $0 | Stove itself is the primary material |
| Labor | $100 | $250 | $700 | Includes unhooking old unit, wiring/plumbing tweaks |
| Equipment | $0 | $0 | $50 | Basic tools or rental may be required |
| Permits | $0 | $25 | $300 | Gas line work often requires permit review |
| Delivery/Disposal | $0 | $50 | $150 | Old appliance haul-away sometimes included |
| Warranty & Extras | $0 | $50 | $200 | Extended warranty or accessory kits |
What Drives Price
Fuel type, size, and features are the main price drivers. Gas stoves typically cost more upfront than electric models in some markets due to installation considerations. A 30-inch unit with convection, self-cleaning, and smart controls will trend toward the upper end of the range. Assumptions: standard 30″ width, residential kitchen, single oven configuration.
Factors That Affect Price
Key components include: fuel type (gas vs electric), oven configuration (single vs double), energy efficiency, and smart features. Higher efficiency and specialty features raise both sticker price and potential installation costs. For instance, a double-oven 48-inch model will be noticeably more expensive than a standard 30-inch single-oven unit. Assumptions: mid-range construction, typical kitchen wiring/gas line there.
Regional Price Differences
Prices vary by region in the United States. In the Northeast and West, appliance margins and labor tend to be higher than in the South or Midwest. Expect about ±10–15% deltas between urban and rural areas. Assumptions: market pricing reflects local labor and shipping costs.
Labor, Hours & Rates
Installation time for a basic electric stove often ranges 1–4 hours; gas line work can extend to 4–8 hours. Labor rates commonly run $40–$120 per hour depending on region and license requirements. Labor costs can significantly affect total project price. data-formula=”labor_hours × hourly_rate”>
Alternative Options & Prices
Consider alternatives to a full replacement to save costs. A basic drop-in electric range with standard features may cost substantially less than a premium induction model. Refurbished units or floor-models can also reduce upfront outlays while offering similar function for mid-range needs. Assumptions: price-sensitive buyer exploring options.
Real-World Pricing Examples
Three scenario cards illustrate typical installs.
Basic
30-inch electric range with standard bake, no-fan convection. Total: $700–$1,100 (stove $500–$750, delivery $0–$50, labor $150–$300). Assumptions: no permits, standard outlets.
Mid-Range
30-inch gas range with convection and self-cleaning. Total: $1,200–$1,900 (stove $900–$1,400, labor $250–$500, permits $0–$150). Assumptions: basic gas line upgrade, standard venting.
Premium
30-inch/36-inch dual-fuel or induction with smart controls. Total: $2,400–$4,200 (stove $1,800–$3,000, installation $600–$1,200, permits $0–$300). Assumptions: professional venting, upgraded electrical service.
Assumptions: region, specs, labor hours.
