Prices for delivering a mobile home vary widely based on distance, site readiness, and home specifications. The main cost drivers include transport, site preparation, and permits. This guide presents typical ranges in USD and per-unit estimates to help buyers plan a budget for mobile home delivery.

Item	Low	Average	High	Notes
Delivery & Transportation	$3,000	$6,000	$12,000	Includes trucking, pilots, escorts; distance matters
Site Preparation	$1,500	$4,000	$8,000	Foundation, leveling, permits, utilities readiness
Permits & Fees	$150	$1,500	$4,000	Local/state approvals; impact fees
Set-Up & Installation	$2,000	$5,000	$10,000	Anchoring, hookups, inspections
Delivery Equipment & Labor	$1,000	$3,000	$6,000	Crane, forklift, crew hours
Delivery/Disposal Fees	$200	$700	$2,000	Waste removal, debris hauling
Contingency & Overhead	$500	$1,500	$3,000	Contingency for delays, insurance

Assumptions: region, home size (e.g., 14–16 feet wide), site accessibility, hookups distance, and delivery window.

Overview Of Costs

Typical total project ranges and per-unit ranges provide quick budgeting benchmarks. For a standard 14–16 ft wide single-wide or double-wide mobile home, total delivery cost typically falls in the range of $9,000 to $25,000, depending on distance and site readiness. Per-foot or per-ton calculations help compare options: most deliveries price in the $100–$300 per linear foot band when distance spares major site work, while the full turnkey package often lands in the $6,000–$12,000 range for transport alone.

Factors like access constraints or heavy equipment needs can push totals higher. When the site requires extensive foundation work or utility hookups, costs can exceed $25,000. Conversely, straightforward moves over short distances with minimal site prep often land near the low end of the spectrum.

Cost Breakdown

data-formula=”labor_hours × hourly_rate”>

Category	Low	Average	High	Notes
Materials	$200	$1,200	$3,000	Anchors, fasteners, hookups
Labor	$1,000	$3,000	$6,000	Crews for transport, siting, hookups
Equipment	$800	$2,000	$4,000	Crane/forklift rental
Permits	$150	$1,500	$4,000	Local approvals
Delivery/Disposal	$200	$700	$2,000	Disposal of site debris
Warranty	$0	$400	$1,200	Limited coverage
Overhead & Contingency	$500	$1,500	$3,000	Insurance, admin, delays

Assumptions: distance under 50 miles, standard 14–16 ft unit, paved access.

What Drives Price

Distance, site readiness, and home specifications are the main price levers. A longer transport route increases fuel and crew time, while a challenging site with slope, trees, or uneven ground raises foundation and installation costs. Vehicle and trailer requirements vary by unit width, weight, and method of deployment, affecting equipment rental and labor hours.

Two niche drivers worth noting: high-velocity routes with escorts or police permits add per-mile surcharges; and heavy or oversized homes (taller than 12 ft or wider than 16 ft) commonly require special permits and pilot vehicles, inflating the total by 10–40% in many markets.

Regional Price Differences

Prices vary across regions due to labor, permitting, and access. In the Northeast, higher permitting and crane costs push up totals; the Midwest tends to offer more competitive labor rates; the West often incurs higher fuel and equipment charges. Expect roughly +/− 10% to 25% deltas when comparing Urban, Suburban, and Rural scenarios.

Urban areas generally incur higher delivery and permit costs. Suburban sites may require more groundwork or utility coordination, while Rural sites can see lower labor but higher travel premiums if crews must travel long distances.

Labor, Hours & Rates

Labor time is a key determinant of cost, often priced by crew size and hours. Typical transport crews include 2–4 workers for a move, with installation crews of 2–6 on-site. Hourly rates range from about $75 to $150 per hour per worker, depending on region and crew specialization.

Assumptions: standard crew composition, daytime work window, accessible site.

Additional & Hidden Costs

Hidden items can add meaningful amounts if not anticipated. Signage, line items for temporary utilities, weather-related delays, and insurance deductibles may appear on invoices. Some projects incur disposal and debris-hauling fees, as well as temporary power or water connections.

Permit delays can stretch timelines and raise costs. In some jurisdictions, sewer hookups or GPS-guided site surveys are required, adding weeks to the schedule and modestly increasing fees.

Price By Region

Three example regional comparisons illustrate typical differences. Coastal metros often skew higher due to labor costs and permits; Great Plains markets may be closer to the national average; Mountain/West regions can show elevated fuel and equipment charges. Expect a regional delta of up to ±20% from the national midpoint for total delivery costs, with per-foot or per-mile pricing reflecting local rates.

Real-World Pricing Examples

Three scenario cards show practical budget ranges for common cases.

Pricing FAQ

Common price questions are answered with practical ranges. Do not rely on a single quote; obtain itemized estimates to compare what is included — transport, site work, permits, hookups, and contingency. Availability of turnkey services can affect total cost by thousands.