Homeowners and small contractors frequently search for the cost of mini mix concrete. This article breaks down typical price ranges, per-unit details, and regional influences to help plan a budget for small pours or footings. The main cost drivers are mix type, delivered volume, and any required equipment or labor.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Mini mix concrete (delivered) | $120 | $160 | $200 | Per cubic yard; small-load delivery ranges vary by region |
| Small-batch concrete (on-site mix) | $100 | $140 | $180 | Labors, materials, and bags mixed on-site |
| Delivery fee (minimum charge) | $40 | $60 | $90 | Applied to most orders under 2 cubic yards |
| Concrete mixer rental | $25 | $40 | $60 | Hourly or per-day rental |
| Permit or inspection | $0 | $0 | $150 | Typically not required for small residential pours |
Mini Mix Concrete Price Per Cubic Yard by Region
Prices vary by region and season, but typical ranges for small delivered loads fall between $120 and $180 per cubic yard. Northern states with higher transportation costs can see($130-$180), while the Southeast and Midwest often land closer to ($110-$160). Regional nuances include accessibility, surcharge for rural delivery, and fuel prices. Assumptions: standard mix, 3000 PSI, normal access, weekday delivery.
| Region | Low (per yd³) | Average (per yd³) | High (per yd³) | Notes |
|---|---|---|---|---|
| Midwest | $110 | $145 | $165 | Typical delivery and small-batch options |
| South | $105 | $150 | $180 | Often lowest due to density of suppliers |
| West | $120 | $165 | $190 | Higher transport costs in some states |
| Northeast | $125 | $170 | $200 | Logistics can push price up |
For small footings or pads, contractors frequently charge a minimum, then a per-cubic-yard rate. A typical scenario uses 0.5 to 2 cubic yards per job. Size drives both the base charge and delivery minimums. Larger small-batch orders benefit from partial-load discounts, but still face delivery fees that may not scale linearly.
| Project Size | Mini Mix Price Range | Per Cubic Yard | Notes |
|---|---|---|---|
| 0.5 yd³ pad | $70-$110 | $140-$220 | Delivery minimum applies |
| 1 yd³ slab edge | $120-$160 | $120-$160 | Often a single truckload |
| 2 yd³ small footing | $170-$210 | $85-$105 | Potential bulk discount |
Concrete strength and additives affect cost. A standard 3,000 PSI mix costs less than high-strength or specialty mixes. Standard mix typically ranges $120-$170 per yd³ delivered. Additives like accelerators or fibers can add $10-$40 per yd³. On-site mixing can reduce delivery costs but adds labor time.
| Mix Type | Delivered Price Range | Labor/On-site Mix | Notes |
|---|---|---|---|
| Standard 3,000 PSI | $120-$170 | $100-$140 | Most common for residential slabs |
| High-early strength (4000+ PSI) | $150-$210 | $120-$180 | Faster cure, slight premium |
| Fiber-reinforced | $140-$190 | $110-$150 | Adds crack resistance |
Same-day or early-morning deliveries can incur surcharge, while planning a delivery during off-peak hours may reduce costs. Booking in advance often lowers the delivery fee and ensures truck access. If access is tight or there are multiple stops, expect higher fees or partial-load pricing.
Labor is typically a fixed crew cost plus any on-site mixing. A basic pour might use 1-2 workers for 1-2 hours, while larger small pours extend this. Labor can range $75-$125 per hour depending on region and crew skill. Equipment like wheelbarrows or portable mixers adds rental or purchase costs if not supplied by the supplier.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Labor (hourly) | $75 | $95 | $125 | Two-person crew common for small pours |
| Portable mixer rental | $25 | $40 | $60 | Per day or per project |
| Wheelbarrow/tools | $0 | $10 | $30 | Depends on site needs |
Delivery minimum charges, fuel surcharges, and environmental disposal fees can alter final pricing. Expect a small surcharge for rural locations or urgent delivery. Always confirm if the quoted price includes tax, delivery, and ramp-up time at the site.
When evaluating quotes, compare the same volume, PSI, and delivery terms. Ask for a per-yard price, a separate delivery charge, and any minimums, so you can align apples to apples. Include assumptions about weather, site access, and whether the mix is ready-to-pour or needs on-site mixing.
Control scope, choose standard mix, and optimize timing. Consolidate multiple small pours into one delivery when possible. Consider on-site mixing if the site access is good and labor costs are favorable. Verify whether substitution with pre-mixed bags or a different cement type could lower overall cost while meeting strength requirements.
