Buyers typically pay for Maytag dryers based on model type (electric or gas), capacity, and whether the unit is a basic, feature-rich, or premium smart model. Main cost drivers include the appliance price, installation needs, venting requirements, and potential delivery or disposal fees.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Dryer Price (Maytag) | $350 | $650 | $1,100 | Electric or gas variants vary widely |
| Delivery & Removal | $0 | $60 | $150 | Depends on retailer and old appliance haul |
| Installation/Hookup | $0 | $120 | $250 | Gas line check or vent work adds cost |
| Vent Kit & Ductwork | $20 | $80 | $200 | New vent runs or upgrades required |
| Permits & Fees | $0 | $20 | $60 | Typically minimal for replacement in most homes |
| Extended Warranty | $30 | $100 | $180 | Protection plan length varies |
| Taxes | $0 | $50 | $120 | State/local rates apply |
Overview Of Costs
Cost estimates for a Maytag dryer vary by model and installation needs. Typical ranges cover electric and gas models, basic vs. feature-rich designs, and whether professional hookup is required.
Assumptions: standard 7–8 cubic foot electric or gas dryer, new venting in an existing system, local delivery included, no structural modifications.
Price At A Glance
Electric Maytag dryers often fall in the $350–$900 range, with higher-end smart or large-capacity units reaching $1,100. Gas models commonly start around $500 and can exceed $1,000 for premium configurations.
Delivery, installation, and venting can add $60–$200 or more. A basic vent kit and simple hookup may be enough for a straightforward swap, while upgrades or gas line considerations raise the price.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $0 | $0–$20 | $50–$120 | Vent kit, hoses, filters |
| Labor | $0 | $60–$120 | $150–$250 | Professional installation or hookup |
| Equipment | $0 | $0–$40 | $60–$100 | Tools or diagnostic fees |
| Permits | $0 | $0–$20 | $0–$60 | Usually minimal for residential install |
| Delivery/Disposal | $0–$20 | $40–$90 | $100–$150 | Truck fee and old unit haul |
| Warranty | $0 | $50–$100 | $150–$180 | Extended coverage optional |
| Taxes | $0 | $40–$60 | $100–$120 | Depends on locality |
| Contingency | $0 | $10–$20 | $30–$50 | Small cushion for misc |
What Drives Price
Model features and installation complexity are the main price drivers for Maytag dryers. Electric units tend to be cheaper upfront than gas models, but gas hookups may incur higher installation costs. Larger capacities, moisture sensors, steam options, and smart connectivity add to the sticker price.
Key price variables include the dryer’s capacity (ranging from 7.0 to 9.0 cubic feet in many Maytag lines), heat source (electric vs gas), venting requirements (existing ductwork vs new runs), and any needed modifications to electrical or gas lines.
Regional Price Differences
Prices can vary by region due to labor rates and local taxes. In urban coastal markets, delivery and setup can spike, while rural areas may see lower service charges but higher freight costs. Typical deltas relative to national averages are around ±10–20% depending on locale.
Labor, Hours & Rates
Professional installation generally requires one to two hours for a simple swap and up to several hours for gas conversion or extensive vent work. Typical labor rates range from $60 to $150 per hour nationwide, with higher urban RoIs in major metros.
Additional & Hidden Costs
Hidden costs may include extended venting runs, premium metal ducting, new outlet circuits, or required electrical upgrades. Surprise fees are most common if the old vent can’t be reused or if a new gas line must be installed.
Real-World Pricing Examples
Three scenario cards illustrate common purchasist outcomes for Maytag dryers. Assumptions: standard 30–40 amp electric or 110–125 V gas hookup in a single-family home; existing vent or new vent only if specified.
Basic Scenario
Model: Maytag electric 7.4 cu ft; no smart features; standard drum. Labor: 1 hr; Delivery: included; Vent kit: included.
Est. Total: $430–$520 with per-unit base at $350–$450.
Mid-Range Scenario
Model: Maytag 7.5–8.0 cu ft electric with moisture sensor; standard venting; basic warranty.
Est. Total: $650–$900 (dryer $500–$750 plus delivery/install $150–$200).
Premium Scenario
Model: Maytag gas 7.4–7.8 cu ft; smart features; enhanced sensor tech; new vent run possible.
Est. Total: $1,000–$1,350 (dryer $900–$1,100 plus gas hookup and vent work $100–$250).
Assumptions: region, specs, labor hours.
Ways To Save
Consider an electric model if gas installation costs are prohibitive. Look for rebates or retailer promotions; check for bundle deals with a matching washer. If replacing an old vent, reuse existing ducts where safe and permitted to minimize ducting costs.
Ask about bundled delivery and haul-away to avoid separate charges. Compare warranty options to balance upfront price with long-term maintenance.
