Buyers typically pay for an interlocking brick driveway based on area, base preparation, brick type, and edge restraints. The cost to install a 600-square-foot driveway generally ranges from $6,000 to $18,000, with most projects landing around $10,000-$12,000. Price depends on brick size, pattern, subgrade conditions, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Interlocking brick driveway (600 sq ft) | $6,000 | $10,000 | $18,000 | Includes bricks, base, and installation |
| Per sq ft installed | $10 | $16 | $30 | Depends on brick type and pattern |
| Base and subbase (compacted aggregate) | $1,000 | $2,500 | $6,000 | Crushed stone or stabilized base |
| Edging and restraints | $200 | $600 | $1,500 | Material depends on border type |
Interlocking Brick Driveway Total Price for a 600-Sq-Ft Project
The typical total includes bricks, base material, compacting, edging, and installation labor. Expect a combined cost range of $6,000-$18,000 for 600 sq ft, with midrange installs often around $10,500-$12,500 in many markets. Assumptions: standard 4-inch base, common paver size (6×6 inches or 4×8 inches), mid-range brick, and conventional access for equipment.
Key Cost Components in an Interlocking Brick Driveway Quote
Major components break down into materials, labor, equipment, and base preparation. Detailed costs vary by brick type and pattern complexity.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials – bricks/pavers | $2.50/sf | $5.50/sf | $9.50/sf | |
| Base material and subbase | $1,000 | $2,500 | $6,000 | |
| Edge restraints and edging | $150 | $600 | $1,500 | |
| Labor – installation | $4,000 | $6,500 | $12,000 | |
| Equipment and compaction | $500 | $1,500 | $3,000 | |
| Permits (if required) | $0 | $300 | $1,000 | |
| Delivery and waste disposal | $200 | $500 | $1,000 |
How Size, Subgrade, and Pattern Affect Final Price
Project size, soil quality, and brick pattern strongly influence cost. Smaller homes with compact patterns cost less per square foot, while complex herringbone patterns increase material waste and labor time.
Assumptions: typical residential site, standard soil, and mid-grade bricks.
Regional Labor Rates and Material Costs Across the United States
Prices reflect regional variation in labor markets and material availability. Coastal markets can be 10-25% higher than inland regions for similar work.
| Region | Low | Average | High | Notes |
|---|---|---|---|---|
| Northeast | $8,000 | $12,000 | $22,000 | |
| Southeast | $6,500 | $10,500 | $18,000 | |
| Midwest | $6,000 | $9,500 | $15,500 | |
| West | $7,000 | $11,500 | $19,500 |
Concrete Base, Edge Restraints, and Paver Type: Price Drivers
Base material, edging, and brick selection are primary drivers. Choosing pervious pavers or thicker bases raises costs but improves drainage and durability.
Assumptions: standard 4-inch base, concrete edging, and common 6×6 inch pavers.
Time, Crew Size, and Scheduling Impact on Interlocking Driveway Pricing
Labor decisions affect total cost. A two-person crew for a 600 sq ft project typically finishes in 2-4 days, with higher rates during peak season.
Assumptions: weekday work, standard access, no major site complications.
Ways to Trim Costs Without Compromising Durability
Cost-saving strategies include limiting pattern complexity, standard brick size, and consolidating prep work. Bundling edging and materials from a single supplier can reduce waste and freight.
Quote Examples With Realistic Scenarios
Real-world quotes illustrate how scope shifts impact totals. Two common scenarios show per-square-foot ranges and total costs for similar driveways.
| Scenario | Area | Materials | Labor | Total |
|---|---|---|---|---|
| Midrange 600 sq ft with 6×6 pavers | 600 sf | $3,500 | $6,500 | $10,000 |
| High-end 600 sq ft with complex pattern | 600 sf | $7,000 | $9,000 | $16,000 |
Assumptions: standard site access, mid-grade bricks, and conventional compaction.
