The price of interior doors varies by material, style, and installation requirements. Typical costs are driven by door type, finish, hardware, and whether labor is DIY or professional. This guide presents practical price ranges in USD to help buyers set budgets and compare options.
Summary table below captures low, average, and high ranges with notes for common scenarios.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door slab only (hollow-core, single) | $30 | $60 | $120 | Standard sizes; interior use; prehung adds cost. |
| Premade slab (solid core, veneer) | $100 | $180 | $400 | Better sound dampening and durability. |
| Prehung interior door unit | $150 | $275 | $900 | Includes frame; ready to install. |
| Hardware kit | $20 | $60 | $150 | Handles, hinges, latch, strike plate. |
| Labor (installation) | $80 | $180 | $500 | Per door; varies by condition and location. |
| Finishing/staining/painting | $50 | $120 | $350 | Includes labor and materials for finish. |
| Specialty doors (wrought iron, glass, curved) | $300 | $600 | $2,000 | Designs with extra fabrication or hardware. |
| Delivery & disposal | $20 | $60 | $150 | Includes haul-away of old door. |
Overview Of Costs
Door pricing typically spans from basic slab options to premium custom units. For a standard hollow-core interior door, buyers commonly see $30-$120 for the door itself, with premade units (prehung) around $150-$900 depending on size and features. Per-door labor often runs $80-$180 if professional installation is chosen, while finishing adds about $50-$350. Materials like solid core, wood veneer, or engineered options push costs higher.
Assumptions: region, specs, labor hours. Project scopes vary by door type, rough opening size, and whether trims or casing are replaced or repainted.
Cost Breakdown
Table format shows how price components contribute to the total project.
| Components | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $30 | $180 | $600 | Door slab, core type, veneer or paintable finish. |
| Labor | $80 | $180 | $500 | Removal, hanging, alignment, and hardware set. |
| Hardware | $20 | $60 | $150 | Hinges, latch, strike, and knobs. |
| Delivery/Disposal | $20 | $60 | $150 | Transport to site and disposal of old door. |
| Finish | $50 | $120 | $350 | Stain, paint, or varnish plus labor. |
| Permits/Code considerations | $0 | $0 | $60 | Typically not required for interior doors, vary by project. |
| Contingency | $0 | $20 | $100 | Unforeseen framing or alignment issues. |
What Drives Price
Material and design choices are the primary cost levers. Hollow-core doors are the least expensive, while solid core, wood veneer, or custom designs raise the price. Door size and rough opening complexity affect both materials and labor. If the door includes glazing, panels, or specialty hardware, expect higher costs and longer installation times.
Other drivers include finishes and whether carpentry tasks beyond hanging are needed, such as removing old casing, patching walls, or adjusting trim. For homes with higher-end finishes, buyers often opt for dampers, soft-close hinges, or decorative glass, which adds financial and time considerations.
Regional Price Differences
Prices show modest regional variation due to labor markets and material sourcing. In the Northeast urban markets, total per-door installation with labor can run higher by roughly 5–15 percent versus the national average, while rural areas may see 0–10 percent lower costs. The Midwest typically sits near the national mean, with premium options like solid wood edging toward the upper end.
Assuming three common regions: Urban (coast and large cities) often adds delivery and access premiums; Suburban edges toward mid-range; Rural areas may offer lower labor rates but longer travel time for contractors.
Labor, Hours & Rates
Labor costs hinge on door type, existing frame condition, and regional rates. Typical hourly rates range from $60 to $140 for skilled carpenters, with most standard interior installations requiring 2–4 hours per door. For prehung units, the labor is combined with hardware and trim work. Longer runs or custom fits extend labor duration.
Labor formula preview: data-formula=”labor_hours × hourly_rate”> Apply this to a scenario with 3 hours at $100/hour for a single prehung door and 1 hour for finish touch-ups.
Regional Price Differences
Three scenario snapshots illustrate regional differences. Urban centers tend to exceed nationwide averages for labor, while suburban markets often align closely with them. Rural installations may shave a portion off the labor component but could incur added costs for delivery and longer wait times.
Real-World Pricing Examples
Three scenario cards provide practical quotes you might see from pros.
Basic
Door type: hollow-core slab; size 32×80; finish: paint-ready. Materials $40, Labor $100, Hardware $25, Delivery $25. Total $190 per door.
Mid-Range
Door type: solid-core, veneer; prehung; size 32×80; finish: stain. Materials $180, Labor $150, Hardware $60, Delivery $40, Finish $120. Total $550 per door.
Premium
Door type: solid wood, 6-panel; custom size; finish: high gloss; hardware upgrade. Materials $420, Labor $260, Hardware $120, Delivery $60, Finishing $220. Total $1,080 per door.
Additional & Hidden Costs
Hidden costs can affect final budgeting. Potential items include trimming and casing replacements, door stops, weather stripping upgrades, repainting adjacent walls, and disposal of multiple old doors. If bathroom or kitchen doors require moisture-resistant finishes, expect higher material costs. Scheduling conflicts or access restrictions may add incremental labor charges or call-back fees.
Price By Region
Interstate differences generally reflect supply chains and labor pools. East Coast urban markets show higher overall totals compared with the West and South in some cases, while the Midwest often sits near the average. For a household comparing two quotes, ask each contractor to itemize the same components so the regional delta reflects only prices rather than scope differences.
Price Components
Project scope and per-unit considerations matter. If you replace multiple doors, some contractors offer bulk pricing or reduced per-door labor. Substituting a cheaper door while maintaining existing frames lowers cost but may reduce durability or finish quality. For bathrooms or moisture-prone spaces, select water-resistant cores to prevent future replacements and costs.
Costs At A Glance
Assumptions: region, materials, number of doors, and finish level. For a typical interior doors project in a mid-range home, expect a per-door total in the $250–$900 range depending on door type and labor, with premium custom doors reaching beyond $1,000 per door when multiple features are included.
Bottom line interior door pricing balances door quality, installation complexity, and finishing options. Buyers should solicit itemized quotes, confirm per-door pricing, and compare energy, sound, and durability features when selecting materials.
