The cost to replace a Goodman AC compressor typically includes the unit itself, labor, and any related components. Key drivers are the compressor model, system size (tons), refrigerant handling, and local labor rates. Buyers should expect a multi-price range that reflects different levels of service and parts.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Compressor unit (Goodman brand) | $350 | $750 | $1,100 | Prices vary by model and tonnage |
| Labor (installation) | $300 | $700 | $1,000 | Typical 4–8 hours |
| Refrigerant & materials | $100 | $250 | $500 | R-410A common |
| Permits & inspections | $0 | $150 | $300 | varies by jurisdiction |
| Disposal & miscellaneous | $50 | $150 | $300 | Old equipment and extras |
Overview Of Costs
Replacing a Goodman AC compressor generally costs between $800 and $2,800, with most residential jobs landing around $1,400 to $2,000 depending on system size and labor. The price range includes the compressor unit, labor, refrigerant, and basic startup checks. Assumptions: 1–2 tonnage variations, standard 15 SEER or similar model, and typical electrical work.
The per-unit basis commonly shown is around $350–$1,100 for the compressor itself, plus $300–$1,000 for installation. When a contractor must upgrade components or cables, expenses can rise further, especially if a line-set or electrical service needs upgrading.
Cost Breakdown
| Materials | Labor | Equipment | Permits | Delivery/Disposal | Warranty | Taxes |
|---|---|---|---|---|---|---|
| $350–$1,100 | $300–$1,000 | $0–$150 | $0–$300 | $0–$150 | Included or extended | Varies |
Assumptions: region, specs, labor hours. data-formula=”labor_hours × hourly_rate”>
Pricing Variables
Key price drivers include system size in tons (2–5 tons common for homes), compressor model (Basic vs. high-efficiency), refrigerant handling, and whether any electrical or ductwork updates are required. Higher-SEER or higher-output units push up both parts and labor costs. For Goodman, the exact model and whether a dual-stage or single-stage compressor is used affect the total price.
Ways To Save
Compare quotes from at least three local HVAC pros to identify the best value without sacrificing warranty or reliability. Bundling a compressor replacement with system maintenance or coil cleaning can reduce per-visit costs. Scheduling during the off-peak cooling season may yield lower labor rates and more flexible availability.
Regional Price Differences
Prices vary by location due to labor markets and permit costs. In the Midwest, total project ranges may lean toward the lower end, while coastal urban areas can be higher because of labor demand and stricter codes. Rural areas often show reduced labor charges but may incur higher delivery or diagnostic fees. Expect roughly ±10% to ±25% variation between regions.
Labor & Installation Time
Most compressor replacements take 4–8 hours on a standard 2–5 ton Goodman system. Labor rates commonly range from $75 to $150 per hour, depending on local market conditions and the technician’s expertise. Complex scenarios with refrigerant charge optimization or access challenges can extend the job to a full day.
Real-World Pricing Examples
Basic scenario: 2-ton Goodman compressor, standard installation, no upgrades. Parts: $500; Labor: 4 hours at $100/hour; Refrigerant and misc: $150; Total: around $1,200.
Mid-Range scenario: 3-ton unit, minor electrical upgrade, coil cleaning. Parts: $800; Labor: 6 hours at $110/hour; Refrigerant: $250; Permits/fees: $150; Total: about $2, ��10.
Premium scenario: 4-ton, two-stage compressor, line-set replacement, full system check, and extended warranty. Parts: $1,000; Labor: 8 hours at $130/hour; Refrigerant: $300; Permits: $300; Disposal: $150; Total: around $3,000.
Assumptions: region, specs, labor hours.
