Homeowners typically pay for a GE dishwasher pump replacement in the low hundreds to mid hundreds, depending on the pump type, model compatibility, and service logistics. The main cost drivers are the pump price, labor time, and any necessary drainage or electrical work.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Parts (pump assembly, seals) | $60 | $120 | $220 | Depends on model; OEM parts often pricier |
| Labor (repair service) | $90 | $180 | $320 | Typically 1–3 hours of work |
| Additional components (valves, gaskets) | $10 | $40 | $100 | May be bundled with parts |
| Diagnostics & travel | $20 | $40 | $100 | Flat fee or hourly depending on tech |
| Total project range | $180 | $380 | $740 | Assumes standard GE dishwasher and compatible pump |
Assumptions: region, model compatibility, labor hours.
Overview Of Costs
The overall cost for GE dishwasher pump replacement encompasses parts, labor, and possible extras, with a typical range of $180–$740 depending on model and service conditions. The most significant drivers are the pump price and the labor rate in the local market. For some high-end models or hard-to-reach installations, costs can exceed the high end.
Cost Breakdown
Breakdown helps buyers see where money goes: parts, labor, and potential add-ons. The following table presents a structured view, including assumptions and a per-unit perspective when relevant.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Parts | $60 | $120 | $220 | Pump assembly, seals; OEM variants may cost more |
| Labor | $90 | $180 | $320 | Typical 1–3 hours; hourly rates vary by region |
| Equipment | $5 | $15 | $40 | Basic tools; specialized gear if needed |
| Permits/Code Checks | $0 | $0 | $0 | Usually not required for residential dishwashers |
| Delivery/Disposal | $10 | $20 | $60 | Includes removal of old parts |
| Warranty/Overhead | $5 | $15 | $40 | Margin for the service provider |
| Taxes | $0 | $0 | $0 | Depends on local tax policy |
| Total | $180 | $380 | $740 | See notes for model-specific variances |
What Drives Price
Repair difficulty and unit compatibility drive price, not just the pump price. Key factors include model year, pump type (motor vs. impeller design), and the accessibility of the unit within the cabinet.
Labor, Hours & Rates
Labor costs reflect regional rates and technician time, with typical GE pump work consuming 1–3 hours. In urban areas, hourly rates tend to be higher, while rural regions show modest pricing variations. Longer runs or multiple checks can push the final bill toward the upper end.
Regional Price Differences
Regional spread matters: prices can vary by roughly ±15%–25% between regions. For example, urban Northeast vs. rural Midwest shows noticeable gaps due to labor markets and travel fees. Local appliance shops may bundle labor with a limited warranty, affecting the total cost.
Local Market Variations
Local market conditions influence exact quotes, and some shops offer flat diagnostic fees that may be waived with parts purchase. A basic diagnostic might run $20–$60, and travel charges can add$20–$50 on top of the base bill.
Real-World Pricing Examples
Three scenario cards illustrate common outcomes for GE dishwasher pump replacements. Each includes specs, hours, per-unit pricing, and totals to help set expectations.
Basic Scenario
Model: GE standard dishwasher, generic pump replacement, no extra parts.
Assumptions: region suburban, 1.0–1.5 hours labor. Parts: OEM pump $90, gaskets $15; Labor: $120; Other: $25. Total range: $250–$300.
Mid-Range Scenario
Model: GE with mid-tier pump, gasket kit included, slight access challenge.
Assumptions: region suburban, 1.5–2.0 hours labor. Parts: $140; Labor: $180; Accessories: $30; Delivery/Disposal: $20. Total range: $370–$420.
Premium Scenario
Model: GE high-end unit, complex impeller design, retrofit kit required, tight cabinet access.
Assumptions: region urban, 2.5–3.0 hours labor. Parts: $210; Labor: $260; Equipment: $20; Permits: $0; Delivery/Disposal: $40. Total range: $520–$740.
Cost By Region
Regional price differences can shift totals by a noticeable margin. The same repair in Coastal cities may run higher than in the Inland states due to labor and travel fees, while rural areas might see lower base labor but higher parts shipping costs.
Additional & Hidden Costs
Hidden costs can appear if the failure indicates a broader problem. Possible extras include wiring checks, drainage hose replacement, or a full control board inspection if symptoms recur after pump replacement.
Seasonality & Price Trends
Pricing can vary with service demand; off-peak seasons may offer lower labor rates. Scheduling in spring or fall often yields shorter wait times and more favorable quotes than peak holiday periods.
Warranty & Maintenance Costs
A basic parts warranty and labor guarantee can influence long-term cost of ownership. Some shops offer 90–180 days on labor with a 1-year pump warranty, affecting perceived value and future service costs.
FAQ
Common price questions addressed here: What is the typical pump part price for GE dishwashers? How much does installation labor cost? Are discounts available for bundled parts?
