People typically pay for a GE dishwasher control board replacement to restore cycles, temperatures, and door functions. Main cost drivers include part price, model compatibility, labor time, and shipping or diagnostic fees.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Control Board (GE compatible) | $80 | $130 | $260 | OEM or aftermarket; compatibility varies by model |
| Labor to Replace | $120 | $190 | $260 | Typically 1.5–3 hours |
| Diagnostic / Service Call | $60 | $100 | $150 | Some shops waive if replacing part |
| Additional Parts | $0 | $25 | $60 | Connectors, fasteners, cable harness |
| Tax & Fees | $5 | $15 | $40 | Depends on location |
Overview Of Costs
Typical project ranges reflect part price plus labor. A complete replacement generally falls in the $200–$480 range for parts and labor when no extra faults are found. If a technician visits and replaces multiple components, total costs can rise to $500–$700 in some markets.
Assumptions: GE model compatibility, standard 20–30 minute diagnostic, one control board replacement, no extensive wiring issues.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $80 | $130 | $260 | Control board and any required adapters |
| Labor | $120 | $190 | $260 | 1.5–3 hours at regional rates |
| Permits / Fees | $0 | $0 | $0 | Typically not required for appliance repair |
| Delivery / Return Shipping | $0 | $10 | $40 | Ground shipping for board or diagnostics |
| Warranty / Aftercare | $0 | $15 | $60 | Limited warranty on parts; some services include labor |
| Taxes | $5 | $15 | $40 | State and local taxes vary |
Pricing Variables
Key drivers include the specific GE model, the exact control board part number, and whether the door latch or display circuitry also needs replacement. Also impactful are labor rates by region and the complexity of the wiring harness connections, especially on older dishwashers.
data-formula=”labor_hours × hourly_rate”> Assumptions: standard 1.5–3 hours labor, $80–$100/hour depending on locale.
Regional Price Differences
Prices vary by region, with urban areas tending to have higher labor rates than suburban or rural locations. In the Northeast, total costs may be 5–12% higher on average, while the Midwest can be 2–8% lower. The West Coast often reflects the highest hourly labor rates, adding to the overall bill.
Labor & Installation Time
Installation time estimates assume one technician and standard access to the appliance. Minor board swaps may take about 60–120 minutes, while models with auxiliary modules can extend to 180 minutes or more if rewiring is needed.
Real-World Pricing Examples
Basic Scenario
Specs: GE front-control dishwasher, board failure only, OEM board, standard wiring harness. Time: 1.5 hours. Parts: $100 board. Total: $240–$340.
Mid-Range Scenario
Specs: GE tall tub, non-OEM board with warranty, diagnostic fee applied, labor 2 hours. Total: $320–$520.
Premium Scenario
Specs: GE model with display failure and harness replacement, OEM board + two adapters, labor 3 hours. Total: $520–$700.
What Drives Price
Part selection (OEM vs aftermarket) directly affects upfront cost and compatibility risk. Asses: model number, serial, and control board SKU.
Ways To Save
Save tips include requesting a diagnostic first to ensure the board is the root cause, comparing quotes from multiple local shops, and asking about bundled labor for suspected multiple component failures.
Regional Price Differences
Local market variation affects both parts and labor. Expect roughly a +/- 10% swing in total price when comparing three distinct U.S. regions: Urban, Suburban, and Rural. Assumptions: standard delivery, common GE boards, and typical labor rates.
