Homeowners typically pay a broad range for installing a front door with sidelights, driven by door material, sidelights size, and whether the unit is pre-hung. The main cost drivers include the door type, labor time, hardware, and any needed framing work. Prices can vary significantly by region and project complexity, so a realistic cost estimate helps avoid sticker shock.

Assumptions: region, door size, sidelights configuration, and whether the installation is a full door replacement or new opening. The table below summarizes typical pricing to set expectations for a standard single-entry door with two sidelights in a mid-range material and finish.

Item	Low	Average	High	Notes
Door unit (with sidelights, basic)	$1,200	$2,200	$3,500	Fiberglass or steel with energy glass
Labor & installation	$800	$1,400	$2,800	Removal, framing, weatherproofing
Hardware & trim	$150	$350	$700	Hinges, lockset, strike plate, casing
Permits/inspections	$50	$150	$400	Depends on local codes
Delivery/Removal of old door	$50	$150	$350	In delivery or haul-away fees
Contingency / unexpected work	$100	$300	$600	Structural or framing issues

Overview Of Costs

Cost ranges reflect typical residential projects in the United States and assume a standard 80- to 96-inch rough opening for a single-entry door with two sidelights. The per-unit range for the door itself is often quoted as a bundled price with installation when purchased as a package. For standalone door purchases, expect higher installation labor if the opening requires substantial framing or replacement of surrounding siding.

Assuming basic energy-efficient sidelights with clear glass and standard mounting hardware, a typical project may fall in the $3,000 to $6,000 band. If the homeowner selects premium materials, larger sidelights, or custom glass, the total can exceed $8,000. Budget estimates should include delivery and potential site prep such as trim work and weather sealing.

Cost Breakdown

Category	Low	Average	High	Notes
Materials	$1,200	$2,200	$3,500	Door core, sidelights, glass, finish
Labor	$800	$1,400	$2,800	Removal, framing, sealing
Hardware	$150	$350	$700	Locks, handles, hinges
Permits	$50	$150	$400	Local permit costs if required
Delivery/Disposal	$50	$150	$350	Transport and old door haul-away
Contingency	$100	$300	$600	Structural surprises or adjustments
Totals	—	—	—	See project totals in regional sections

What Drives Price

Door material and sidelights are the primary cost levers. Fiberglass with insulated sidelights tends to cost less than premium wood with louvered glass. The size and complexity of the sidelights, such as decorative muntins or tempered glass, add substantial value (and price).

Installation complexity matters too. If the rough opening needs resizing, or if existing framing or siding must be cut, labor hours rise and so do costs. A pre-hung unit reduces on-site labor versus retrofitting a slab door, but the unit price may be higher upfront. Weather sealing and energy performance requirements add both materials and labor costs.

Ways To Save

Compare door types and shop during sale periods to secure better material pricing. Reusing existing trim or selecting standard sidelights instead of custom glass can trim costs. If structural work is minimal, choosing a pre-hung unit saves time and reduces risk of misalignment.

Consider selecting contractor-inclusive packages that bundle delivery, installation, and hardware. Request itemized quotes to identify the largest cost drivers. Seasonal discounts or regional promotions may lower labor rates in off-peak months.

Regional Price Differences

Prices vary by region due to labor markets and material availability. In the Northeast, urban markets may show higher labor rates but more access to stock doors. The Midwest often offers balanced pricing with relatively stable shipping costs. In the South and Southwest, material costs can be lower, but weatherproofing requirements drive some added expenses. Expect regional deltas of roughly ±10% to ±25% around national averages.

Labor, Hours & Rates

Labor is commonly charged per hour or as a fixed project fee. Typical residential installation labor runs $60–$120 per hour, with 6–20 hours of work depending on opening condition and sidelights complexity. data-formula=”labor_hours × hourly_rate”> Premium installers or custom glass can push rates higher.

Real-World Pricing Examples

Basic scenario: Standard steel door with two 12×60 sidelights, no ornate glass, standard hardware, pre-hung. Assumes a clean opening and no major structural issues. Total: around $2,000 to $3,800, with labor $800–$1,600 and materials $1,000–$2,200.

Mid-Range scenario: Fiberglass door with two 14×60 sidelights, energy-efficient glass, mid-tier hardware, minor framing adjustments. Total: roughly $3,000 to $5,000, including labor $1,200–$2,200 and materials $1,800–$3,000.

Premium scenario: Wood/front with custom glass sidelights, enhanced insulation, premium hardware, and full trim; possible structure modifications. Total: $5,000 to $9,000+ depending on customization, with higher labor hours and material costs.

Assumptions: region, specs, labor hours.

Regional Price Differences (Expanded)

Three distinct markets illustrate how pricing can swing. In dense urban cores of the Northeast, add-ons like city permits and high labor demand can add 15%–25% to base costs. Suburban markets generally follow national averages with ±10% variation. Rural areas may see lower labor but higher delivery or procurement time, creating a −5% to +15% spread. Taking regional context into account helps align estimates with real quotes.

Costs By Region (Snapshot)

Urban Northeast: Door unit $2,000–$4,000; Installed $3,500–$7,000. Suburban Midwest: Door unit $1,600–$3,000; Installed $2,800–$5,000. Rural Southeast: Door unit $1,500–$2,800; Installed $2,400–$4,800. These ranges assume standard sidelights and common hardware; premium options push higher.

Assumptions: region, specs, labor hours.