Typical repair costs for Frigidaire dishwashers vary by problem, parts, and labor. The price range commonly reflects common failures such as pump or motor issues, control boards, and door seals. This guide lays out cost drivers, pricing ranges, and real world examples to help buyers budget accurately.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Typical repair cost | $150 | $320 | $600 | Includes parts and labor for common failures |
| Diagnostic visit | $60 | $100 | $180 | Some shops deduct diagnostic fee if repair proceeds |
| Common part costs | $20 | $120 | $400 | Motors, pumps, control boards vary widely |
| Labor rate | $60 | $95 | $150 | Per hour; regional differences apply |
| Total reinstall or disposal | $50 | $120 | $250 | Removal and disposal of old unit when needed |
Overview Of Costs
Cost range at a glance for Frigidaire dishwasher repairs typically spans from about 150 to 600 depending on the failure type and labor needs. Some smaller fixes stay near the lower end, while failures to the pump, motor, or control board can push costs higher. Assumptions: region, specs, labor hours.
Cost Breakdown
| Materials | Labor | Equipment | Permits | Delivery/Disposal | Warranty | Overhead | Contingency | Taxes |
|---|---|---|---|---|---|---|---|---|
| $20–$400 | $60–$150 per hour | $0–$30 | $0–$50 | $0–$60 | Included or extended | $10–$40 | $0–$50 | Varies by state |
Labor hours and rates influence total cost significantly; longer service calls raise the bill, while efficient diagnostics can reduce it.
Factors That Affect Price
Key drivers include the specific Frigidaire model, the diagnosed fault, and the availability of replacement parts. Two niche drivers are critical: a high end control board may cost 200–350 and a motor or pump replacement can run 150–250 in parts alone. For models with complex wiring or rare OEM parts, prices can exceed the typical high end. Assumptions: region, specs, labor hours.
Model and fault complexity strongly shape both parts and labor needs, while accessibility of the unit in a cabinet or under a countertop can influence labor time.
Ways To Save
Shop smart by comparing local quotes, asking for a written estimate, and bundling services where possible. If a control board is the issue, some independent repair shops offer refurbished boards at lower cost than new OEM parts. Consider maintenance checks that prevent repeat failures, potentially lowering long term costs. Assumptions: region, specs, labor hours.
Request multiple quotes and inquire about diagnostic fees and warranty coverage to avoid unexpected charges.
Regional Price Differences
Prices can vary across the United States due to labor rates and parts availability. In metropolitan areas, total repair costs often run about 10–20 higher than rural regions with similar problems. Suburban markets tend to sit between these extremes. Assumptions: region, specs, labor hours.
Labor & Installation Time
Repair time depends on the fault and access. A pump or motor replacement may take 2–4 hours, while a control board swap or wiring repair can extend to 4–6 hours. Some repairs require additional testing to confirm stability. Assumptions: region, specs, labor hours.
Additional & Hidden Costs
Hidden costs can include after hours service, emergency call fees, or new wiring harnesses required for older units. If a dishwasher must be moved or cabinet finish is touched up, expect minor add‑ons. Some shops bill for disposal and haul away separately. Assumptions: region, specs, labor hours.
Real-World Pricing Examples
Scenario cards illustrate typical project ranges
Basic
Specs: Frigidaire dishwasher model old generation, pump failure suspected, standard installation space. Labor: 2 hours. Parts: pump and seals. Totals: $150–$260. Per‑unit: $60–$120 for parts plus $60–$140 for labor. Assumptions: region, specs, labor hours.
Mid-Range
Specs: Control board malfunction with accessible wiring, mid‑level model, standard bay. Labor: 3–4 hours. Parts: control board, harness. Totals: $320–$520. Per‑unit: $120–$240 for parts; $95–$130 per hour labor. Assumptions: region, specs, labor hours.
Premium
Specs: High end Frigidaire model, complete motor/pump assembly plus new door seal, difficult access. Labor: 4–6 hours. Parts: motor, pump, control board, seals. Totals: $520–$900. Per‑unit: $200–$350 parts; $100–$150 per hour labor. Assumptions: region, specs, labor hours.
