Homeowners and builders typically pay a mix of material and installation costs for Everlog siding measured per square foot. Main cost drivers include board thickness, profile, color, substrate preparation, and labor time. This guide presents actual price ranges in USD to help with budgeting and decision making.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Siding Material | $6.50 | $9.50 | $13.00 | Per sq ft material cost before installation |
| Labor to Install | $4.00 | $7.00 | $11.50 | Per sq ft; depends on crew efficiency |
| Substrate Prep | $1.50 | $3.00 | $6.00 | Repair or reinforce wall framing |
| Fasteners & Accessories | $0.40 | $0.90 | $2.00 | Includes clips, screws, sealants |
| Permits & Inspections | $0.10 | $0.50 | $2.00 | Per sq ft estimate spread over project |
Assumptions: region, scope, and job complexity vary; all figures are rough ranges for material plus typical labor costs.
Overview Of Costs
Everlog siding costs are typically reported as a per square foot price that combines material, installation, and additional items. In a standard U S home, expect total project ranges from about $9 to $25 per square foot, depending on profile and site specifics. A mid range project often lands near $14 to $20 per sq ft, while premium setups with premium textures can exceed $25 per sq ft. The per sq ft estimates often translate to project totals using the home’s exterior area. For example, a 2,000 sq ft facade would range roughly from $18,000 up to $50,000 in total, with mid range around $28,000 to $40,000. Note that thinner boards and simpler installs stay toward the lower end, while thicker boards, elaborate profiles, and extensive substrate work push costs higher.
Per-unit pricing helps with quick comparisons; expect material costs around $6.50 to $13 per sq ft and installed costs around $10 to $20 per sq ft on average. The exact mix of materials, coatings, hidden work, and local labor rates shapes the final line item.
Cost Breakdown
Understanding where money goes helps identify value options and potential savings. The following table breaks down typical cost categories for Everlog siding projects and shows how they combine into a total per sq ft price.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $6.50 | $9.50 | $13.00 | Includes boards and trims |
| Labor | $4.00 | $7.00 | $11.50 | Crew rates vary by region |
| Equipment | $0.50 | $1.20 | $2.50 | Scaffolding, lifts, cutters |
| Substrate Prep | $1.50 | $3.00 | $6.00 | Repairs and moisture barriers |
| Accessories | $0.40 | $0.90 | $2.00 | Sealants, fasteners, clips |
| Permits | $0.10 | $0.50 | $2.00 | Depends on jurisdiction |
| Waste & Delivery | $0.15 | $0.50 | $1.50 | Disposal and transport |
Assumptions: exterior surface area is accessible; no major structural work; region-based labor rates apply.
What Drives Price
Several factors significantly shift pricing for Everlog siding per square foot. Material specifics such as board thickness and texture have the largest impact. For example, a 3/4 in thick board with a rustic texture costs more than a thinner, smooth variant. Tighter grain patterns or color treatments can add to both material and finishing costs.
Other important drivers include installation method, substrate condition, and local labor rates. If the wall requires extensive prep, moisture barrier upgrades, or a custom trim package, expect notable price increases. Regional supply chain differences can also produce regional price spikes during peak home improvement seasons.
Additional drivers to consider are durability and warranty terms. Higher grade finishes or longer warranty periods add to the upfront cost but may reduce long term maintenance expenses. A proper flashing and sealing plan also prevents leaks, which can avoid future costly repairs.
Assumptions: standard weather resistance requirements; no major structural modifications; local codes followed.
Ways To Save
To manage cost per square foot, compare material grades, seek bulk purchase options, and optimize installation schedules. Choosing a mid grade Everlog siding with a simpler texture often yields substantial savings without sacrificing appearance or performance. Scheduling installation during shoulder seasons can reduce labor costs in many markets.
Consider long term value by evaluating maintenance needs and warranty coverage when selecting profiles and finishes. A clear site assessment before ordering materials avoids waste and delays. If possible, prepare the site to minimize labor time and avoid surprises that trigger premium charges.
Assumptions: projecting in US markets; standard residential exterior; no unusual site constraints.
Regional Price Differences
Prices vary by region due to labor markets, material availability, and local code requirements. In the Northeast, expect higher installation costs; the Southeast may show moderate labor costs with higher material options; the Midwest often balances between the two. A typical delta is ±10 to 25 percent when comparing three distinct regions.
For example, a 2,000 sq ft exterior in a metro area might see higher per sq ft install costs than a rural project in the same region, with urban sites paying a premium for access and scaffolding needs.
Assumptions: three representative U S regions used for illustration; project scope constant.
Real World Pricing Examples
Basic scenario features entry level texture, standard thickness, and standard substrate work. Spec: 3/4 in board, standard trim, no extensive prep; hours: 10–14; totals: $15,000–$22,000.
Mid range scenario uses mid grade texture and color with moderate prep; Spec: 3/4 in board, moisture barrier, some repairs; hours: 14–22; totals: $26,000–$38,000.
Premium scenario employs premium texture, thicker boards, comprehensive prep and custom trim; Spec: 1 in board, enhanced coatings, full substrate repair; hours: 22–34; totals: $40,000–$60,000.
Assumptions: region varies; project size ~2,000 sq ft; labor rates reflect typical metro markets.
