This article covers the cost of Everlast siding in the United States, including typical price ranges, installation factors, and hidden fees. Understanding cost drivers helps buyers budget accurately.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Product price | $2.50/sq ft | $4.50/sq ft | $7.50/sq ft | Per sq ft material costs; varies by profile and finish |
| Installed cost (1,500 sq ft) | $7,500 | $13,500 | $26,000 | Includes labor, fasteners, and basic trim |
| Labor &time | $3,000 | $5,000 | $9,500 | Depends on crew size and house complexity |
| Delivery/Material handling | $400 | $800 | $1,600 | Regional freight and logistics vary |
| Permits/inspections | $0 | $300 | $1,200 | Local rules may apply |
Overview Of Costs
Everlast siding pricing combines material cost with installation labor and ancillary fees. The total project for a typical 1,200–2,000 sq ft home usually falls in a broad range, driven by panel type, wall height, and job complexity. Per‑square‑foot estimates help compare options, while total project ranges illustrate real-world budgeting needs.
Low, average, and high ranges assume standard stucco-textured boards or smooth profiles, 6″ exposure, and basic trim. Per‑unit figures may appear as $/sq ft, while totals reflect installed projects. Assumptions: region, specs, labor hours.
Cost Breakdown
Material and labor dominate the price, with extra costs for trims, underlayment, and removal of old siding.
| Categories | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2.50/sq ft | $4.50/sq ft | $7.50/sq ft | Composite panels, finishes, and textures |
| Labor | $2.00/sq ft | $3.50/sq ft | $6.50/sq ft | Crew size and access affect hours |
| Equipment | $0.50/sq ft | $1.00/sq ft | $2.00/sq ft | Ladder rental, scaffolding, power tools |
| Permits | $0 | $300 | $1,200 | Depends on municipality |
| Delivery/Disposal | $0.50/sq ft | $0.80/sq ft | $1.20/sq ft | Regional freight and trash removal |
What Drives Price
Key drivers include panel profile, thickness, and installation complexity. Material quality, water management details, and the number of corners, windows, and doors affect both material waste and labor time. Regional freight costs and local code requirements add to the bottom line.
Two niche drivers to watch: interior wall height (two-story homes add complexity) and insulation behind siding, which can impact installation steps and long-term energy performance. Projects with textured finishes or specialty colors typically command higher prices.
Ways To Save
Smart planning can reduce unnecessary expenditures without compromising performance. Consider batching multiple exterior renovations, selecting standard profiles, and scheduling during slower seasons to leverage pricing trends. Replacing only damaged sections or choosing lighter-weight panels can lower both material and labor costs.
Combos like removing existing siding and installing new over existing sheathing may reduce disposal and labor costs, but always confirm with the contractor about warranty implications and required underlayment. Assumptions: region, specs, labor hours.
Regional Price Differences
Prices vary by region due to labor markets and freight. In the Northeast, higher labor rates and stricter building codes can push total costs 8–15% above national averages. The Midwest often shows mid-range pricing with relatively predictable timelines. The Southwest may see lower material costs but higher delivery charges for certain profiles.
Urban areas tend to be higher by 10–20% versus rural markets because of crew availability and higher permit fees. A suburban project typically lands between the urban and rural ranges. Use a local contractor for a precise estimate tied to your ZIP code.
Real-World Pricing Examples
Three scenario cards illustrate typical project quotes with varying scopes.
- Basic: 1,200 sq ft, smooth panel, standard color, no special trimming. Materials $4.50/sq ft; labor $3.50/sq ft; total approx $12,000–$16,000.
- Mid-Range: 1,500 sq ft, textured panel, heated-edge trim, minor removal of existing siding. Materials $5.50/sq ft; labor $4.50/sq ft; total approx $20,000–$28,000.
- Premium: 2,000 sq ft, decorative profile, insulated backing, extensive removal and disposal. Materials $7.00/sq ft; labor $6.00/sq ft; total approx $34,000–$52,000.
Assumptions: region, specs, labor hours.
