The cost of Everlast composite siding varies by climate, house size, and chosen profile. Buyers typically pay for materials, installation, and finishing, with the main drivers being panel quantity, labor time, and local permit requirements. The price range reflects both per-square-foot pricing and total project estimates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $2.50/sq ft | $4.50/sq ft | $7.00/sq ft | Includes siding panels, trim, and accessories |
| Labor | $3.50/sq ft | $6.50/sq ft | $10.50/sq ft | Removal of old siding may add cost |
| Permits | $100 | $500 | $1,000 | Depends on jurisdiction and project scope |
| Delivery/Disposal | $200 | $500 | $1,000 | Distance from supplier affects cost |
| Warranty | $0 | $300 | $600 | Labor warranty sometimes included |
| Contingency | $200 | $800 | $1,500 | Often 5–10% of project |
Overview Of Costs
Cost components for Everlast composite siding typically balance materials, installation time, and regional pricing. For a standard 1,500–2,000 square-foot home, expect total costs in the range of $9,000 to $22,000, depending on panel style, underlayment, and whether the project includes full wrap or just a partial upgrade. Per-square-foot estimates commonly fall between $6 and $12 for installed work. Assumptions: region, specs, labor hours.
Costs break down into materials, labor, and ancillary items. A mid-range project might use mid-grade trim and corner pieces, with standard moisture barriers and flashing. For homes with complex profiles or multi-story elevations, premium trim and longer install times push the price higher.
Cost Breakdown
Understanding where money goes helps compare bids. The following table summarizes typical allocations for a mid-range project. Assumptions: 1,500–2,000 sq ft home, single-story or low-slope roof line, standard 6-inch exposure, and typical weather in the continental U.S.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $3,750 | $9,000 | $14,000 | Includes siding panels, underlayment, flashings |
| Labor | $5,250 | $13,000 | $21,000 | Crew size and hours drive totals |
| Permits | $100 | $500 | $1,000 | Depending on local code requirements |
| Delivery/Disposal | $200 | $500 | $1,000 | Transport and disposal fees |
| Warranty | $0 | $300 | $600 | Warranty on materials and workmanship |
| Contingency | $200 | $800 | $1,500 | Reserved for unexpected issues |
Factors That Affect Price
Project specifics drive variation. Regional labor rates, house size, and the number of surfaces to cover strongly influence totals. Siding thickness, finish texture, and color choices impact material cost per square foot. A higher-grade finish or beveled profile raises both material and installation time, while intricate details like curved walls or trims add complexity and cost.
Regional climate and access influence planning. In coastal or windy regions, additional fasteners and moisture barriers may be required, raising material and labor expenses. Houses with multiple elevations or steep pitches require more scaffolding and safety measures, pushing per-square-foot pricing higher.
Ways To Save
Strategic planning helps reduce overall outlay. Consider seasonal discounts, bulk ordering of trim kits, or bundling with window or door replacements. Quick wins include selecting standard profiles rather than premium textures and consolidating two shorter projects into one job to reduce mobilization costs.
Another approach is to install a partial siding upgrade now and complete the rest later if budget constraints exist. Request a detailed bid that itemizes materials and labor; many contractors will adjust scope to keep the project within target costs without compromising key performance aspects.
Regional Price Differences
Prices vary by location. A regional view shows three market patterns: Urban, Suburban, and Rural. In Urban areas, installed costs can be 8–15% higher due to higher labor rates and access challenges. Suburban markets often sit near the national average, while Rural areas may be 5–12% lower due to lower labor costs but higher material transport fees. Overall, expect a +/- 10% delta between these market types for the same project scope.
Labor & Installation Time
Labor hours are a major driver of total cost. Labor time depends on wall complexity, old siding removal, and weather windows. A typical installation for a 1,500–2,000 sq ft home might require 2–4 days for a straightforward job, rising to 5–7 days for multi-story homes or intricate profiles. When comparing bids, confirm crew size, qualification, and whether the estimate includes scaffold rental or interior protection.
Real-World Pricing Examples
Concrete scenario snapshots help set expectations. These three cards illustrate how specs influence totals. All assume Everlast composite siding installed by a licensed contractor in a typical U.S. climate, with standard color and profile choices. Assumptions: region, specs, labor hours.
Basic
14,000 sq ft of siding on a single-story home with standard profile and minimal trim. Labor 40 hours, materials $7,500, permits $200, disposal $300. Total: $9,000–$12,000. Per sq ft: $0.64–$0.86 installed.
Mid-Range
1,600 sq ft two-story with mid-grade profile and medium trim. Labor 110 hours, materials $9,000, permits $450, disposal $500, warranty $300. Total: $14,000–$18,000. Per sq ft: $8.75–$11.25 installed.
Premium
2,100 sq ft with premium texture, full wrap, upgraded flashing, and larger profile. Labor 170 hours, materials $14,000, permits $900, disposal $700, warranty $600. Total: $22,000–$28,000. Per sq ft: $10.50–$13.50 installed.
Maintenance & Ownership Costs
Ownership costs extend beyond installation. Composite siding like Everlast typically requires low maintenance compared to wood, but periodic cleaning, sealant checks around trim, and potential repainting after a decade may be needed. A simple maintenance cycle can cost $200–$600 every 5–10 years depending on exposure and color care. Five-year cost outlooks generally favor moderate maintenance against higher repaint or restoration costs for alternative materials.
Price By Region
Regional variance affects budgeting. In the Northeast, higher insulation standards and winter weather can add to installation time and materials, while the Southeast’s humidity can influence moisture barrier choices. The West often features higher labor rates due to demand and cost of living. Expect total project costs to reflect regional labor differentials and local supply costs, with mid-range projects clustering near national averages but with regional swings of ±10–15% depending on local conditions.
