Buyers typically pay a broad range for entry door replacement, driven by door type, frame repair needs, finish options, and installation complexity. The main cost drivers include door material, hardware upgrades, labor time, and permits where applicable. The following sections present clear ranges and practical pricing guidance for U.S. buyers.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Entry door (prehung, exterior) | $350 | $750 | $2,000 | Hinged units; steel or fiberglass common |
| Labor (installation) | $200 | $600 | $1,800 | Includes removal of old door |
| Materials & hardware upgrades | $100 | $400 | $1,000 | Seals, hinges, locks, weatherstripping |
| Permits & inspections | $0 | $150 | $500 | Depends on local rules |
| Delivery & disposal | $0 | $75 | $250 | Door plus waste removal |
| Contingency & taxes | $50 | $150 | $400 | Allow for unexpected issues |
Assumptions: region, door type, frame condition, weather impacts, and crew availability.
Overview Of Costs
The cost to replace an entry door includes the door itself, professional installation, and related add-ons, with total project ranges typically spanning about $1,000 to $4,000 in most markets. For standard fiberglass or steel prehung doors, expect the core price to fall in the $700–$1,600 range, with installation pushing the total toward $1,000–$3,000 depending on framing and weatherproofing needs. Premium doors, multi-point locks, and intricate trims can drive totals beyond $3,000, especially if substantial framing work or old jamb repair is required.
Cost Breakdown
| Component | Materials | Labor | Permits | Delivery/Disposal | Taxes | Contingency |
|---|---|---|---|---|---|---|
| Standard steel door | $300–$900 | $250–$900 | $0–$150 | $0–$80 | 6–9% | $50–$300 |
| Fiberglass door with finish | $400–$1,000 | $300–$1,000 | $0–$200 | $25–$120 | 6–9% | $60–$350 |
| Hardware upgrades (locks, handles) | $50–$350 | $0–$150 | — | — | — | $10–$60 |
| Weatherstripping & seals | $20–$120 | $50–$120 | — | — | — | $5–$30 |
| Framing adjustments | $0–$300 | $100–$350 | — | — | — | $20–$100 |
| Finish/paint or stain | $0–$150 | $50–$250 | — | — | — | $10–$60 |
data-formula=”labor_hours × hourly_rate”>Prices assume typical single-family installation, standard door sizes, and accessible job sites.
Price Components
Several cost components commonly affect the final price: door material specification, frame condition, and whether the installation is a retrofit or full frame replacement. Material choice (steel vs fiberglass) dominates upfront cost, while frame integrity, weather sealing, and hardware upgrades add layers of expense that can accumulate quickly if extra carpentry or remediation is required.
What Drives Price
Key price drivers include door material (steel, fiberglass, wood), door size, and installation complexity. For example, a standard 36-inch exterior door with a basic frame rehab is far cheaper than a custom-width door with multi-point hardware. Regionally, labor rates differ; urban markets typically demand higher labor plus permit costs, while rural markets may offer lower quotes but longer lead times. Door finishes (painted, stained, or factory veneer) and energy performance ratings (R-value) also shift pricing.
Ways To Save
Save by choosing standard sizes, visiting local stock for quicker delivery, and foregoing nonessential upgrades. Potential savings include using off-the-shelf hardware, scheduling during off-peak seasons, and handling minor weatherproofing yourself where safe. If a full frame replacement isn’t required, a door slab swap with minor jamb work can reduce labor hours and costs.
Regional Price Differences
Prices vary by region due to crew wages, permitting norms, and material availability. In the Northeast, expect higher installation labor and permit fees; the Midwest tends to balance moderate costs with solid supply; the Southwest often features lower labor burdens but higher material transport costs during peak seasons. On average, total door replacement costs can differ by approximately ±15–25% between these regions, depending on complexity and material choice.
Labor & Installation Time
Typical installation takes 4–8 hours for a standard prehung door, with longer durations if framing repair, corner trim, or threshold work is needed. Labor rates commonly range from $60–$120 per hour, depending on locale and contractor experience. Labor, Hours & Rates directly influence total spend, particularly when weatherproofing and sill replacement require specialized attention.
Real-World Pricing Examples
Assumptions: single-family home, standard 80-inch door height, brick or siding exterior, no additional structural repair.
| Scenario | Door Type | Labor Hours | Door Price | Total |
|---|---|---|---|---|
| Basic | Steel, prehung | 3–4 | $450–$750 | $1,000–$1,400 |
| Mid-Range | Fiberglass, insulated | 4–6 | $700–$1,200 | $1,600–$2,600 |
| Premium | Fiberglass with multi-point lock | 6–8 | $1,100–$2,000 | $2,400–$4,000 |
Permits, Codes & Rebates
Some jurisdictions require a permit for exterior door replacements, especially if structural framing is altered. Permit costs can range from $0 to several hundred dollars depending on local code and project scope. Energy-efficient or impact-rated doors may qualify for incentives or rebates, though these programs vary by state and utility provider. Permits & Rebates can materially influence final pricing and timeline, so verify local requirements before scheduling installation.
