Homeowners typically pay to replace or install an entry door lockset with a range driven by lock type, material, and installation complexity. The total cost combines the lockset price, labor, and any required hardware or preparatory work. This guide provides practical pricing in USD, with low–average–high ranges and clear assumptions.

Assumptions: region, specs, labor hours.

Overview Of Costs

Typical price range: $110-$1,480 for a full lockset install depending on lock type, door condition, and local labor rates. The project often breaks down into lockset price (20–70%), labor (15–45%), and any extras (10–20%). For a standard mid-range deadbolt with a lever handle, expect about $150–$350 in materials and $120–$250 in labor under normal conditions.

Assuming a straightforward installation on a standard prepped door, the per-unit pricing can also be shown as lockset $40–$200 and labor $70–$180 per installation, with total typically falling in the $250–$450 range for common homes. Unusual doors or smart-lock additions push costs higher.

Cost Breakdown

Per-unit ranges: lockset price and labor dominate the budget; delivery and disposal are minor line items.

What Drives Price

Lock type and security level are primary drivers; a basic knob or lever set is at the low end, while deadbolts with reinforced strike plates raise the cost. Smart locks, integrated keyless systems, or high-security ANSI ratings increase both hardware and installation time. Another driver is door condition: warped frames or nonstandard doors require extra shimming, holes reaming, or frame repair, all increasing labor and parts cost.

Other notable factors include finish and material (stainless steel or brass finishes cost more than basic metals), door thickness (standard 1-3/4″ vs 2″ doors adds complexity), and existing hardware compatibility. Local labor rates also influence the final bill.

Ways To Save

Choose a standard lockset and simple installation to reduce costs by avoiding smart-lock integration and opting for a common finish. If the door is already prepped for a lockset, labor hours drop considerably. Purchasing the hardware as a bundle from a single retailer can also trim delivery fees and ensure compatibility.

Consider timing: prices can shift with demand; booking midweek or during off-peak seasons may yield lower labor costs. If the door requires minimal alignment work, you may avoid additional frame work charges.

Regional Price Differences

Prices vary by region, with higher urban rates and lower rural rates. In the Northeast, a typical project may run toward the higher end due to labor costs and building codes, while the Midwest remains mid-range. The South often sees competitive pricing but can vary with material access. Expect ±15–25% deltas when comparing Urban vs Suburban vs Rural markets.

Labor, Hours & Rates

Labor costs commonly range $70–$170 per install, influenced by crew size and time on site. A typical install takes 2–4 hours, longer if frame adjustments or weatherstripping are needed. For two doors, labor can double, but some shops offer bundled pricing. data-formula=”labor_hours × hourly_rate”>

Real-World Pricing Examples