Digital Database
Double Wooden Garage Doors Price Guide for U.S. Buyers 2026 – Adnan Painting and Remodeling
Published: 2026-06-30T08:08:58+00:00 • 3 min read

Prices for double wooden garage doors vary by wood type, panel design, insulation, and installation complexity. The key cost drivers are door size, material grade, hardware, finish, and local labor rates. This article presents the typical cost ranges and concrete price factors for double wooden garage doors, including per-unit and per-door estimates.

Item Low Average High Notes
Door pair (each 16×7, solid wood) $1,600 $2,800 $4,500 Standard raised panel in pine or oak
Insulation (R-Value 8-12) $300 $650 $1,200 Polyurethane or polystyrene fill
Finish and stain $150 $350 $700 Clear, stain, or paint
Hardware package (springs, tracks, hinges) $250 $500 $1,000 Premium hardware increases price
Labor for installation $600 $1,200 $2,000 Regional variation tallies in labor hours
Delivery and disposal $50 $150 $350 Includes removal of old doors
Permits and inspections $0 $150 $500 Depends on local rules
Total per door pair (typical) $3,000 $5,000 $9,000 Assumes standard two-car garage framing

Cost Components For Double Wooden Garage Doors

buyers typically pay for a complete system including doors, insulation, finish, hardware, and installation labor. The main components are the door assemblies, insulation, exterior finish, and the professional install. Assumptions: Midwest rates, standard pine cores, standard hardware, and normal access.

Materials Labor Hardware Delivery/Removal Warranty Contingency
$1,600–$4,000 $600–$1,900 $250–$1,000 $50–$350 $100–$400 $0–$500

Labor and Installation Rates by Region

Regional labor costs drive the majority of installed price swings for double wooden doors. In the U.S., expect higher rates in coastal metro areas and lower rates in rural regions. Assumptions: 1–2 installers, standard ceiling height, one-day job.

Region Typical Labor Range Per-Door Pair Install Time Notes
New England/West Coast $1,000–$2,000 6–10 hours Higher steel hardware costs in some markets
Midwest $700–$1,500 5–9 hours Lower material sourcing variation
Southeast $750–$1,600 6–9 hours Weather considerations for exterior finish

Size, Wood Type, and Insulation Impact on Price

Door size, wood species, and insulation level are the dominant price drivers. A wider, thicker door with solid hardwood and higher R-value adds cost quickly. Assumptions: 16×7 doors with 1.75″ core, oak veneer, basic stain.

Smaller or thinner configurations cost less, while premium hardwood skins (mahogany, maple) and laminated cores push up pricing. Standard thickness and common species provide a reliable middle ground for budgeting.

Material Options And Their Price Trajectory

Material choice directly affects durability and price. Solid wood doors command higher initial cost than engineered cores with wood veneer. Assumptions: Engineered core with veneer vs full solid oak panel.

Engineered cores with high-quality veneer can deliver long-term stability at a lower cost than solid lumber. High-end species and custom carvings substantially raise the price, sometimes more than double the base solid-core option.

Hardware and Finish Tiers

Hardware upgrades and exterior finishes add noticeable value and cost. Premium hinges, heavier-duty springs, and insulated tracks increase price. Assumptions: Standard torsion springs, steel tracks, decorative cladding.

Finishes range from basic stain to multi-coat polyurethane systems with UV protection, each tier affecting the final number by hundreds of dollars per door pair.

Delivery, Removal, and Garage Preparation

Delivery and site prep affect total project price. Narrow driveways, stair access, or restricted entry can require additional labor or equipment. Assumptions: Standard driveway clearance, one-flight entry minimal.

Old-door removal and disposal typically costs $50–$350 depending on complexity and local disposal fees. Access constraints may add time and line-item charges.

Seasonal Price Variations In The U.S.

Prices shift with demand cycles and supplier stock. Spring and early summer often see higher installation activity, while late fall may offer better scheduling but longer lead times. Assumptions: Typical weather window for exterior work.

Budget buffers of 5–15% are prudent when scheduling during peak home-improvement periods or when coordinating multiple trades.

Ways To Reduce The Price Without Sacrificing Safety

Smart scope management and material decisions reduce costs. Reuse existing tracks when possible, choose standard panels, and limit custom milling. Assumptions: Quick turn install, no structural upgrades.

Consider grouping installation with other exterior projects to gain contractor efficiency and potential discounts on call-out charges.

Practical Quote Example With Details

Real-world quotes illustrate typical ranges across job specifics. A mid-range setup might include 16×7 solid-wood doors, insulated cores, stained finish, standard hardware, and on-site installation. Assumptions: Midwest region, standard access, two-car garage.

Item Size Wood Insulation Finish Labor Hours Total
Quote A 16×7 Pine veneer R-8 Stain 6–8 $3,200–$4,400
Quote B 16×7 Oak solid R-12 Painted 8–10 $4,800–$6,400
Quote C 18×7 Mahogany veneer R-10 Clear finish 9–11 $6,000–$8,500

These examples show how size, material, and finish drive totals. Always verify local lead times and whether permits are required in your area.

Unit Costs To Compare Per Door Pair

Per-unit pricing helps compare across bids. For a standard 16×7 double door, a common range is $1,600–$4,000 for the door pair, excluding installation. Assumptions: Mid-grade veneer, basic insulation, standard hardware.

Component Low Average High Notes
Door pair (16×7, veneer) $1,600 $2,800 $4,000 Solid core alternatives vary
Complete installed price (with labor) $3,000 $5,000 $9,000 Typical mid-range setup