Prices for a double sliding door project vary by frame material, glass type, size, hardware, and installation complexity. This article breaks down the cost factors and provides practical ranges to help buyers budget accurately for a double sliding door replacement or new install. The term cost and price appear throughout to match common search intent for budgeting.

Item	Low	Average	High	Notes
Door unit (two panels, standard 6’8” x 6’0”)	$1,100	$2,000	$3,200	Vinyl or aluminum frames
Installation labor (2 workers, 6–8 hours)	$600	$1,200	$2,000	Per door unit
Glass type (tempered, clear)	$400	$800	$1,400	Low-E adds cost
Hardware and track kit	$150	$350	$600	Rollers, handles, seals
Permits and inspections	$0	$150	$600	Depends on local rules
Delivery/haul-away of old door	$50	$150	$300	Local charge

Assumptions: Midwest labor rates, standard vinyl or aluminum frames, single-story installation, access without major structural work.

What Double Sliding Door Typically Costs by Size and Material

Buyers usually pay a total that ranges from $1,100 to $3,200 for a standard 6’8” by 6’0” double sliding door, with an average near $2,000–$2,600 depending on material and glass. A larger 8’0” doorway or higher-end wood or composite frames can push costs toward $3,500 and beyond. Per-unit pricing often hovers around $550–$1,800 for the door portion and $600–$1,600 for installation depending on complexity.

Assumptions: standard 2-panel configuration, single-story home, standard installation with no structural reinforcement.

Major Cost Components in a Double Sliding Door Quote

Typical components break down into five areas: Materials, Labor, Glass, Hardware, and Permits. The table shows common ranges to anchor a bid.

Component	Low	Average	High	Notes
Door frame materials	$500	$1,200	$2,200	Vinyl or aluminum are cheaper; wood or composite higher
Glass and glazing	$300	$700	$1,200	Tempered, Low-E options add cost
Labor for removal and install	$350	$900	$1,700	Two-person crew common
Hardware and tracks	$120	$300	$520	Rollers, handles, seals
Permits and inspections	$0	$100	$500	Regional variation

Formula: total = door + labor + glass + hardware + permits. Labor hours and rates vary by region and crew size.

Variables That Move the Price: Frame, Glass, and Hardware Specs

Key drivers include frame material, glass performance, and hardware quality. For example, upgrading from vinyl to aluminum frames can add $400–$1,000, while choosing triple-pane or Low-E glass can add $300–$900 per opening. Heavy wood frames or fiberglass composites can push the door unit into the $2,000–$5,000 range depending on finish and size.

Assumptions: standard installation, moderate climate region, typical glare reduction requirements.

Regional Price Variations Across the United States For Doors

Regional differences can swing total costs by 15%–35% above or below the national averages. West Coast markets often see higher labor rates, while the South and Midwest may be more favorable. Urban centers typically add delivery and permit charges, whereas rural areas may have longer lead times but lower installation rates.

Assumptions: two-story home, standard access, normal weather window for installation.

Labor and Installation Time by Door Type

Labor cost scales with door size and access. A typical two-person crew spends 6–8 hours on a standard double sliding door job. In tight spaces or with existing frame removal, times can extend to 10–12 hours, increasing labor costs accordingly.

Formula: labor = hours × hourly rate (commonly $60–$120/hr per pair of installers).

Cost-Saving Moves: How to Trim the Price on Double Sliding Doors

Scope management and material choices are the main levers for savings. Consider vinyl frames instead of wood, standard tempered glass without upgrades, and postponing custom finishes. If you replace only one panel instead of the full door, you may cut costs by 15%–25%. Scheduling in mild weather and avoiding peak demand months can also reduce labor surcharges.

Assumptions: no structural modifications required; standard site access; mid-range materials.

Comparing Common Materials: Vinyl, Aluminum, and Wood

Material choice affects both upfront price and long-term value. Vinyl doors are typically the lowest cost option (roughly $1,100–$1,900 installed). Aluminum doors run $1,400–$2,900, while wood or composite frames can range from $2,000 to $4,000 or more for a double door with premium finishes.

Assumptions: mid-range glass, standard grid patterns, and typical weather exposure.

Per-Unit Pricing and Job Scope Examples

Concrete examples help anchor bids in real-world sizes and scopes. A 6’8” x 6’0” vinyl double door with standard glass might run $1,350–$2,000 door only, with installation pushing total to $1,950–$3,000. Upgrading to aluminum frames plus Low-E glass can push the total to $2,700–$4,200. A larger 8’0” opening with wood veneer finishes and premium hardware could reach $4,000–$6,000 installed.

Assumptions: two-door configuration, standard exterior installation, no custom mullions.

Summary of Practical Price Ranges by Project Scope

Table below consolidates typical outcomes by scope.

Scenario	Door Unit	Installation	Total Range	Notes
Standard vinyl, 6’8″ x 6’0″	$1,100–$1,900	$600–$1,200	$1,700–$3,100	Mid-range glass, standard hardware
Aluminum, Low-E glass	$1,400–$2,200	$800–$1,400	$2,200–$3,600	Higher durability, better energy
Wood/Composite, premium finish	$2,000–$3,800	$1,000–$1,600	$3,000–$5,400	Premium aesthetics, maintenance considerations

Assumptions: standard exterior install, normal access, no structural framing changes.