Homeowners typically pay a mix of materials, labor, and optional motorization when shopping for double roller blinds. The final cost is driven by window size, fabric type, and whether a motorized system is chosen. This article protects the pricing interest by presenting practical price ranges and concrete cost drivers for double roller blinds price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Per-window price (manual) | $200 | $450 | $900 | Common for standard 2’–3′ width, 4’–6′ height. |
| Per-window price (motorized) | $600 | $900 | $1,800 | Includes motor and remote or wall control. |
| Per sq ft installed (materials) | $4 | $6 | $9 | Assumes standard fabric and install prep. |
| Labor (per window, installation) | $100 | $250 | $400 | Professional mounting, alignment, and testing. |
| Removal/ disposal | $20 | $60 | $150 | Depends on existing hardware and debris. |
Double Roller Blinds Price By Size and Fabric
Prices scale with window width, height, and fabric grade. For a standard 2’–3′ wide by 4’–6′ tall window with a light to midweight fabric, expect $200-$450 per window for non-motorized options. Larger windows or premium fabrics push toward the $600-$900 zone, and motorized units commonly land in the $900-$1,800 range per window depending on control type and integration. Assumptions: typical residential installation, standard headrail system, no specialty blackout layering beyond standard double-roller configuration.
Assumptions: Midwest labor rates, standard materials, normal access.
Major Cost Components In A Double Roller Blinds Quote
Material, labor, and motorization are the three primary cost blocks. A typical quote breaks down into fabric and hardware, labor for measuring and mounting, and optional electronics or remote controls. The table below shows a representative quote structure for a single window, with ranges that reflect size and options.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (frame, fabric, hardware) | $80 | $180 | $350 | Includes double-roller mechanism and fabric pair. |
| Labor | $100 | $250 | $400 | Measuring, mounting, alignment, test. |
| Motorization | $0 | $300 | $900 | Optional; adds control options. |
| Delivery/Disposal | $20 | $60 | $150 | Depending on job site access. |
| Warranty & Overhead | $25 | $60 | $120 | Labor and parts coverage implications. |
| Taxes & Permits | $0 | $30 | $80 | Local sales tax and permit if required. |
How Room Size Affects Labor And Materials
Labor hours rise with window count and height, not just width. For each window, measuring, cutting, and mounting typically require scope-sensitive time. A small living room with three standard windows often lands in the 2–4 hour range total per window, while tall or numerous windows can push to 6–8 hours per window when precision is critical. Assumptions: standard ceiling height, no irregular shapes, accessible mounting surfaces.
Per-window labor estimates help buyers compare bids. A common approach is to multiply measured labor hours by an hourly rate to generate a fair labor cost.
Motorization vs Manual Controls And Their Costs
Choosing motorization can nearly double the per-window price in some cases. Manual double roller blinds typically range from $200–$450 per window for standard sizes. Motorized sets add about $300–$900 per window, depending on motor type (battery, hardwired, or smart-home compatible) and control method (remote, wall switch, or app). For large installations, a centralized motor system may offer bulk pricing but still increases upfront costs. Assumptions: average residential electrical work is included if required.
Regional Price Variations For Double Roller Blinds
Prices vary by region due to labor markets and material costs. In the U.S., coastal metro areas can show higher installed prices than inland suburbs. A typical range for a single window may shift by roughly $50–$150 in high-cost markets versus midwest or southern markets. For a 3’×5′ window, you might see manual options from $210–$520 in some regions and $320–$650 in others. Assumptions: standard install crews, typical travel time included.
Upgrade Options That Change The Price Per Square Foot
Premium fabrics, blackout liners, and UV protection coatings add cost per square foot. Upgrading to a heavy blackout fabric or high-density liner can add $1–$3 per sq ft beyond baseline fabric prices. If a project uses multiple windows with 80–120 sq ft total area, the incremental cost for premium options could reach $80–$360 to the project. Assumptions: residential grade fabrics, standard installation, no custom shapes.
Consider the impact of installation ease on price. If frames need repair or re-trimming, expect additional labor hours and possible material expansion, which shifts the per-window cost higher.
Common Add-Ons And Their Impact On Total Cost
Add-ons such as headrail covers, valances, or motorized scene presets can raise price. A modest valance can cost $20–$60 per window, while a smart-home ready motor and controller cluster might add $150–$500 per window beyond basic motorization. Delivery and haul-away of old blinds can add $20–$100 per window depending on site access and debris load. Assumptions: standard packaging, no bulky custom features.
Typical Replacement Or Installation Timelines And Fees
Project duration links to window count and site access. A straightforward, single-visit installation for five standard-sized windows may take 4–6 hours, with billed labor in the $250–$450 per window range in many markets when including measurement and mounting. Replacement of existing blinds with the same hardware often reduces install time and cost. Assumptions: no structural repairs, standard interior finishes.
Cost Comparison Across Submarkets And Scenarios
Compare bids by scenario to guard margins. For a small apartment with three standard windows, manual options typically run $600–$1,200 total, while motorized systems can reach $2,200–$3,600. In a single-family home with eight windows, expect manual pricing of $1,600–$3,600 or motorized pricing of $5,000–$12,000 depending on fabric and control systems. Assumptions: standard sizes, indoor installation, no custom shapes.
