Prices for a double roll up garage door depend on size, material, insulation, and installation complexity. The term “cost” or “price” appears here to help shoppers compare quotes and plan a budget for a dual-door setup.
Typical totals include door material, hardware, coatings, installation labor, and potential permits or add-ons. The following ranges assume standard 16-foot wide by 7-foot tall doors, steel panels, and a mid-range local crew in a typical U.S. metro area.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Double roll up door (pre-finished steel, 26ga) | $1,200 | $1,800 | $2,600 | Includes panel material and basic tracks |
| Professional installation | $400 | $800 | $1,200 | Labor for mounting, wiring, and alignment |
| Insulation and weather seals | $100 | $300 | $600 | R-value 6-12 typical |
| Opener (optional) | $150 | $350 | $600 | Basic chain drive to smart motor |
| Removal of old door | $50 | $150 | $350 | Per door if replacing existing |
| Electrical work and permits | $0 | $150 | $600 | Local permit may apply |
Typical Price Range For A Double Roll Up Garage Door
Most buyers pay between $1,500 and $3,200 for a complete double roll up door project. The price hinges on door width, height, and whether insulation is included. A basic non-insulated model in a standard size may land around $1,400-$1,900, while a fully insulated, weather-tight pair with upgraded hardware can reach $2,800-$4,000 including installation in many markets.
Assumptions: standard 16 ft wide by 7 ft tall, steel construction, mid-range finish, standard track system, no custom colors. regional labor differences can shift totals by ±15–25%.
Assumptions: Midwest labor rates, standard materials, normal access.
Cost Breakdown By Major Components
Breaking the quote into components helps compare bids precisely. The table shows common cost blocks and typical dollar ranges for a double roll up door project.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (door panels, tracks, springs) | $1,000 | $1,600 | $2,400 | Includes basic weather seals |
| Labor (installation) | $400 | $800 | $1,200 | Crew of 1-2 workers, 3–6 hours |
| Hardware & fasteners | $50 | $150 | $300 | Includes rollers and hinges |
| Insulation options | $50 | $250 | $500 | R-value 6–12 profiles |
| Opener and controls | $150 | $350 | $600 | Remotes, keypad, smart control |
| Permits & inspections | $0 | $100 | $500 | Depends on local codes |
Labor hours: 3–6 hours; Hourly rate: $75-$125
Key Variables That Change The Quote
Height, width, and insulation profile are the top price drivers for double roll up doors. The main numeric thresholds to watch include door width in feet, door height, and panel gauge. For example, expanding from 16 ft to 18 ft width often adds material and labor costs in the $200–$600 range, while upgrading from non-insulated to insulated panels can add $300–$900.
Other influential factors include local wage rates, access to the garage (tight spaces add labor time), and whether an opener is included or installed later.
Assumptions: standard drive access, one garage bay per unit, no custom finishes.
Ways To Reduce Price On A Double Roll Up Door
Simple scope controls and timing can cut costs without compromising safety. Consider keeping the standard width/height, selecting a factory-finished color, using basic non-metallic hardware when possible, and scheduling during off-peak seasons to reduce labor rates. Bundling removal, disposal, and installation with a single contractor often yields a discount.
Limit discretionary upgrades like fancy hardware or high-end insulation if budget is tight, and verify whether an opener is essential now or can be added later.
Assumptions: standard build, no custom colors beyond default options.
Regional Price Variations In The United States
Prices vary by region due to labor markets and access to materials. In the Northeast, install costs can run 10–20% higher than the national average, while the Southern states may be 5–15% lower. The Pacific Northwest often reflects higher freight and material costs, which can add 5–12% to the door price.
When comparing quotes, ask for a regional delta and meter the impact of travel charges or regional code requirements.
Assumptions: typical metro area, standard delivery.
Labor Rate And Installation Time Estimates
Labor drives the most variability in a double roll up door project. Expect 3–6 hours of install time for a standard 16×7 door with basic hardware, at $75–$125 per hour. If extra tasks are needed—such as wall repair, uneven concrete, or extra wiring—the time can stretch to 8–12 hours, increasing labor costs accordingly.
A single-trade crew typically handles removal, installation, alignment, and testing in one visit.
Formula: labor hours × hourly rate = labor cost.
Per-Unit And Per-Square-Foot Metrics
Pricing can be scoped per unit or per square footage for multi-door projects. For a single double-door unit, pricing averages roughly $1,500–$3,000 installed. Per square foot, expect a range of about $7–$12 for standard non-insulated doors, rising to $12–$20 for insulated, higher-performance panels.
Typical project uses two equal doors (two bays) at the same address; add-ons apply per unit or per bay as shown.
Assumptions: two bays, standard residential installation.
Common Add-Ons And Why They Cost More
Add-ons quickly raise the total if included by default in the bid. Options such as heavy-duty tracks, wind-load rated systems, premium finishes, or integrated smart openers can push totals upward by several hundred dollars. Disposal fees, old-door removal, or site prep charges also contribute to the final price.
For a fair comparison, confirm whether add-ons are required or optional and request itemized quotes for each.
Assumptions: average weather seals; no wind-rated upgrade unless specified.
