The typical cost for replacing a double garage door varies by material, insulation, size, and installation specifics. Key cost drivers include door construction, hardware, and whether a new opener or labor time is needed. This guide outlines ranges in USD and explains what informs the price.
Assumptions: region, standard 16 ft wide by 7 ft tall double door, common insulated steel or aluminum options, mid-range installation crew.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Double Door Replacement | $1,400 | $2,600 | $4,000 | Includes door panels, tracks, springs, hardware |
| Opener (optional) | $250 | $600 | $1,200 | Chain, belt, or screw types; professional install |
| Labor (install) | $400 | $900 | $1,800 | Per average two-person crew; labor hours depend on door complexity |
| Delivery/Removal | $50 | $150 | $400 | Depends on disposal of old door and equipment |
Overview Of Costs
Typical project ranges reflect door material, insulation, and hardware quality. For a standard 16 ft by 7 ft double door, expect installed costs in the mid-range of $2,000 to $3,800 for a non-insulated or lightly insulated model, and $3,000 to $6,000 for a mid- to high-end insulated steel or aluminum set with upgraded hardware. A premium insulated wood-look or full-wood door increases the price further, commonly $5,000 to $8,000 installed. Labor is a major portion of the cost, often 30–50% of total when ceiling height or tight access adds complexity.
Per-unit pricing examples show door pair costs from about $1,000 to $2,250 per door in common installations, with higher-end options running $2,000–$3,000 per door when paired with premium insulation or custom finishes. For a whole-door upgrade with opener, total project costs typically fall within $2,800–$7,000 depending on options and region.
Cost Breakdown
| Materials | Labor | Equipment | Permits | Delivery/Disposal | Warranty | Overhead | Contingency | Taxes |
|---|---|---|---|---|---|---|---|---|
| Door panels, tracks, springs, insulation | $600–$1,400 | $100–$300 | $0–$100 | $50–$150 | 5–10 years | $150–$300 | $100–$400 | Depends on state |
What Drives Price
Material and insulation choices dominate pricing. Steel doors with polyurethane cores provide good value and moderate insulation, while composite or wood doors cost more upfront but offer aesthetic benefits. A standard 16 ft by 7 ft double door with no insulation typically costs less than an insulated model by $500–$1,500, depending on finish and hardware.
Size, configuration, and hardware influence installation time and parts needs. A tilt-up or sectional door with premium rollers, weather sealing, and heavy-duty springs increases both material and labor costs. For doors with unusual headroom or tight driveways, expect higher crew hours and possible equipment rental charges.
Regional pricing and labor vary widely. Urban centers with skilled installers often show higher price tags than rural areas, by 5–20% on average for similar door specs. Labor rates commonly range from $70–$120 per hour per technician, with a two-person crew typical for this project.
Factors That Affect Price
Regional differences, labor availability, and seasonal demand can swing prices. Seasonality affects scheduling and may push prices up in spring and early summer; off-season discounts may exist in late fall. Assumptions: region, door type, and installation scope.
Ways To Save
Choose standard sizes and colors to minimize custom fabrication costs. Select a mid-range insulation level and a common material like steel or aluminum to reduce both material and labor time. Consider bundling a new opener with the door replacement to secure a package discount from some installers.
Regional Price Differences
Prices for double garage doors show noticeable regional variation. In the West, total installed costs often run 5–15% higher than the national average due to labor and material access. The Midwest tends to be closer to the national baseline, while the Southeast can be slightly lower on average, with some markets offering promotional pricing in shoulder seasons. Regional delta ranges typically fall within ±10% for standard configurations, though premium features can widen the spread.
Labor, Hours & Rates
Labor costs reflect crew size and time. A typical dual-crew installation spans 4–8 hours for standard doors, with longer hours when retrofitting nonstandard frames or when wiring an opener. Hourly rates in many markets fall in the $80–$120 band, depending on experience and demand. data-formula=”labor_hours × hourly_rate”>
Real-World Pricing Examples
Basic scenario: Steel double door, no insulation, standard hardware, no opener. Materials $900; labor $650; permits $0; delivery $60. Total around $1,610, assuming standard scope and local taxes. Assumptions: region, standard frame, basic hardware.
Mid-Range scenario: Insulated steel, with moderate insulation, upgraded hardware, includes single automatic opener. Materials $2,100; labor $1,000; permits $50; delivery $120. Total around $3,270.
Premium scenario: Insulated wood-look door with premium finish, full weather sealing, high-end opener, and smart features. Materials $3,400; labor $1,350; permits $100; delivery $180. Total around $5,030.
Permits, Codes & Rebates
Some locales require a permit for structural work or electrical wiring. Typical permit fees range from $25 to $200, with higher costs in larger cities. Rebate programs or incentives for energy efficiency can reduce net cost by 0–$750 depending on region and insulation level. Check local rules before ordering.
In summary, a double garage door project can span roughly $1,400 on the low end to over $7,000 in premium configurations when including a high-end opener and extensive upgrades. The most impactful levers are door material and insulation, door width compatibility, and installation complexity.
