Homeowners typically pay a range for double French doors including frames, glass options, and install labor. The main cost drivers are door size, materials, glass type and hardware, and whether structural framing work is needed. This guide uses practical price ranges in USD to help set expectations and budgets, with explicit cost detail and common install considerations.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Doors (frame included) | $1,200 | $2,400 | $4,000 | Solid wood or engineered wood typically; larger widths increase the price. |
| Glass options | $300 | $900 | $2,000 | Clear, tempered, or decorative glass adds cost. |
| Hardware | $150 | $350 | $800 | Handles, hinges, multipoint locks vary by finish and quality. |
| Labor for removal and install | $600 | $1,400 | $3,000 | Includes framing and weatherproofing; complexity matters. |
| Permits and inspections | $0 | $200 | $1,000 | Required in some municipalities for structural changes. |
| Disposal and haul away | $50 | $150 | $400 | Old door set removal and debris disposal. |
| Delivery | $0 | $150 | $500 | Local delivery included by some suppliers, otherwise separate. |
| Warranty and follow up | $50 | $150 | $350 | Typical year one coverage; longer plans may cost more. |
| Contingency and extras | $100 | $300 | $1,000 | Additional trims, brickmold, and weatherstripping add up. |
Overview Of Costs
Cost overview shows total ranges and per unit considerations. For typical double French doors, the total project price often falls between $3,000 and $9,000, assuming standard 6 to 8 foot door heights and common frame materials. When per unit pricing is needed, consider $1,000 to $2,000 per door for the core components and installation for mid range builds. Assumptions include standard rough opening and no major structural work. Assumptions: region, specs, labor hours.
Cost Breakdown
The table below mixes total project ranges with notes on per unit pricing and the typical split among components.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $1,200 | $2,400 | $3,800 | Door slab plus frame; wood species and glass type influence. |
| Labor | $600 | $1,400 | $3,000 | Includes removal of existing doors and framing adjustments. |
| Equipment | $0 | $100 | $300 | Tools and small rental if needed. |
| Permits | $0 | $200 | $1,000 | Dependent on area and structural work required. |
| Delivery | $0 | $150 | $500 | Transport within regional markets. |
| Warranty | $50 | $150 | $350 | 1 to 10 year options vary by vendor. |
| Contingency | $100 | $300 | $1,000 | Reserve for unexpected framing or fit issues. |
| Taxes | $0 | $150 | $400 | State and local taxes apply. |
Factors That Affect Price
Key drivers include door size, glass and panel configurations, and installation complexity. Size influences price as wide doors require larger frames and more materials. Glass choice drives cost from basic clear to insulated or decorative patterns. Frame material and door thickness also shift the bottom line significantly, with solid wood generally costing more than hollow core or composite options.
Ways To Save
Smart budgeting can reduce total cost while preserving function. Choose standard sizes to minimize custom framing. Consider more economical glass or finishes, and consolidate work with a single contractor to avoid duplicate site visits. Prep work like sealing and weatherproofing can be partially done by the installer while some tasks, such as trim painting, may be budgeted separately.
Regional Price Differences
Prices vary by market. In the Northeast urban areas, total costs can be 5 to 12 higher than national averages due to labor and permitting norms. The Midwest suburban market may show closer to average costs, while Rural West regions can be 8 to 15 lower due to lower labor rates and transport. Builders also price delivery differently based on distance and load size.
Labor & Installation Time
Labor costs reflect crew size and project duration. A typical install takes 1 to 2 days for a standard 6 to 8 foot pair, but complex framing or custom arches can extend to 3 or more days. Labor hours × hourly rate is a common estimator formula, and some contractors quote a flat day rate for the project. Expect higher rates for high-end materials or nonstandard opening adjustments.
Real World Pricing Examples
Three scenario cards illustrate common outcomes. Assumptions include 6 to 8 foot doors, standard rough opening, and no major structural changes.
Basic
Specs: hollow core doors with clear tempered glass, standard hardware, suburban locale. Labor 8 hours; materials moderate. Total around $3,000 to $4,500. Per unit price roughly $1,500 to $2,250.
Mid-Range
Specs: engineered wood frame, insulated glass, upgraded hardware, modest trim work. Labor 12 hours; materials solid. Total around $5,000 to $7,500. Per unit price about $2,500 to $3,750.
Premium
Specs: solid wood frame, decorative glass, premium hardware, enhanced weatherproofing, potential framing work. Labor 18 hours; materials high. Total around $8,000 to $12,000. Per unit price near $4,000 to $6,000.
Assumptions: region, specs, labor hours.
