Homeowners in Colorado Springs typically pay a range for door replacement that depends on door type, materials, and installation specifics. The main cost drivers are door material, frame work, local labor rates, and any required permits or disposal fees. Cost estimates below reflect typical market conditions in Colorado Springs and nearby suburbs.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Door Type | $350 | $1,150 | $2,000 | Interior or exterior; hollow core vs solid core |
| Labor | $350 | $1,000 | $2,500 | Removal, frame prep, installation |
| Materials | $200 | $900 | $1,800 | Hardware, weatherstripping, sealant |
| Disposal / Demolition | $50 | $150 | $400 | Old door, debris |
| Permits / Codes | $0 | $100 | $300 | Local permit if required |
| Delivery / Freight | $0 | $50 | $150 | Door, hardware shipments |
| Warranty | $0 | $50 | $200 | Varies by manufacturer |
| Tax | $0 | $60 | $200 | Sales tax |
Overview Of Costs
Door replacement cost in Colorado Springs generally spans $1,000 to $4,000 per door, depending on door material and whether framing work is needed. Typical per-unit ranges include $200-$900 for hardware and $350-$2,000 for the door itself. Assumptions: single exterior door, standard 6’8″ height, suburban labor rates.
Cost Breakdown
The table below shows the main cost categories with approximate ranges and common drivers.
| Category | Low | Average | High | Why it varies | Per-unit example |
|---|---|---|---|---|---|
| Materials | $200 | $900 | $1,800 | Door type (hollow/core vs solid core), insulation, glass | $600 door + $150 hardware |
| Labor | $350 | $1,000 | $2,500 | Crew size, removal needs, frame adjustments | $1,000 labor typical for exterior door |
| Equipment | $0 | $50 | $150 | Lifting tools, shims, fasteners | $75 |
| Permits | $0 | $100 | $300 | Code compliance, HOA rules | $100 permit where required |
| Delivery/Disposal | $0 | $50 | $150 | Transportation, hauling away old door | $75 delivery |
| Warranty | $0 | $50 | $200 | Manufacturer vs contractor coverage | $100 warranty |
| Contingency | $0 | $100 | $400 | Unforeseen frame work or weather | $150 contingency |
| Taxes | $0 | $60 | $200 | State/local sales tax | $60 tax |
What Drives Price
Regional differences influence costs. In Colorado Springs, labor rates are typically mid-range nationwide, but remote sub-areas may see higher freight or scheduling costs. Materials choice, such as fiberglass or steel exterior doors, adds upfront cost but improves energy efficiency and security. Assumptions: standard residential project, no custom fittings.
Regional Price Differences
Price variation appears across three scenarios: urban Colorado Springs proper, suburban neighborhoods, and rural surroundings. In urban centers, expect higher delivery and permit costs, while rural areas may have lower labor but higher transit time.
| Region | Low | Average | High | Notes |
|---|---|---|---|---|
| Urban Colorado Springs | $1,100 | $2,300 | $3,800 | Higher permit and delivery costs |
| Suburban Colorado Springs | $1,000 | $2,000 | $3,200 | Balanced labor and materials |
| Rural/Outlying Areas | $900 | $1,900 | $3,000 | Possible travel time impact |
Labor, Hours & Rates
Labor typically runs $60-$120 per hour depending on contractor and crew size. For a standard exterior door with minimal framing, a common job runs 6–12 hours total. Labor hours × hourly rate is a quick way to estimate. Assumptions: single door, standard swing.
Real-World Pricing Examples
Three scenario cards illustrate expected pricing with varying complexity.
Basic: Interior door swap
Spec: hollow-core interior door, standard 6’8″ height, no frame modification. Labor 4–6 hours, materials limited to door and hardware. Total: $800–$1,400. Assumptions: no weatherproofing required.
Mid-Range: Exterior steel or fiberglass door
Spec: pre-hung exterior door, basic weather seal, standard frame adjustments. Labor 6–10 hours, materials includes door, hardware, sealant. Total: $1,500–$3,200. Assumptions: local permit not required.
Premium: Custom or energy-efficient build
Spec: solid-core or multi-point security door, enhanced insulation, steel jamb, upgraded hardware. Labor 8–14 hours, higher-end materials, possible minor framing. Total: $3,000–$6,500. Assumptions: energy rating upgrades and premium warranty.
Cost Drivers & Pricing Variables
Two niche drivers often alter the total: door material and frame compatibility. Door material (fiberglass or steel vs wood) can shift price by 30%–60% while trim or decorative glazing can add 5%–15%. Another driver is frame compatibility, where non-standard jambs or extended jambs can add hours of labor and material costs.
Additional & Hidden Costs
Hidden fees may include enhancements for weatherproofing, extended warranties, or HOA review fees. Unexpected issues like rot in the threshold or damaged framing may require extra labor. Assumptions: standard inspection and no structural repair needed.
Maintenance & Ownership Costs
Beyond initial replacement, consider maintenance for weather seals and finish. Annual upkeep can range from $20 to $100 for sealant and minor repairs, while a full 5-year refresh may require $250–$600 for refinishing or hardware replacements. Lifetime cost of ownership favors durable materials with longer warranties.
Pricing FAQ
Q: Do I need a permit for a door replacement in Colorado Springs? A: Most interior door replacements require no permit, while exterior doors may need one depending on local rules and HOA agreements. Q: How soon can work start after approval? A: Scheduling often ranges from 1–3 weeks in busy seasons. Assumptions: typical market conditions.
