Prices for crusher run gravel vary by region, tonnage, and delivery. Typical cost factors include material quality, haul distance, and required compaction. This guide provides a concise range of costs and practical budgeting guidance for U.S. buyers.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Crusher Run Gravel (per ton) | $12 | $18-$22 | $28 | Includes blend of crushed rock and fines |
| Delivery (per mile) | $2 | $3-$5 | $6 | Distance-based; minimum load may apply |
| Installation/Spreading (per hour) | $60 | $75-$120 | $150 | Labor for spreading and leveling |
| Per Curb or Area Coverage | $0.50 | $0.75-$1.50 | $2 | $/sq ft depending on depth |
Overview Of Costs
Cost ranges reflect typical U.S. scenarios for crusher run gravel used in driveway base, walkways, and landscaping. Assumptions: regional quarry supply, standard 2–4 inch material, mid-range moisture level. Total project pricing often combines material, delivery, and labor, with higher costs for longer hauls or steeper access.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $12/ton | $18-$22/ton | $28/ton | Crusher run typically 1.5–2.5 tons per cubic yard |
| Labor | $60/hr | $75-$120/hr | $150/hr | Spreading, compaction, and leveling |
| Delivery/Transport | $2/mi | $3-$5/mi | $6/mi | Minimum load may apply |
| Permits & Fees | $0 | $0-$50 | $150 | Usually none for residential use; check local rules |
| Occasional Add-Ons | $0 | $25-$100 | $300 | Site cleanup, erosion controls, or extra compaction |
What Drives Price
Material quality and blend influence the price, with finer dust content and stability requirements adding to costs. Regional availability and quarry margins affect both per-ton pricing and delivery fees.
Other pricing variables include volume-based discounts, access limitations (narrow driveways, steep grades), and seasonal demand. A typical driveway project may require 10–20 tons for a modest 12×50 ft area at 4 inches deep, while larger networks demand substantially more material and crew time.
Regional Price Differences
Prices diverge across regions due to quarry proximity and labor costs. In the Northeast, higher rail or trucking costs can push material prices toward the upper end. The Midwest often shows mid-range pricing with good regional availability. The West Coast may see premium delivery fees due to distance and port logistics. Regional delta often ranges ±20% to ±35% relative to national averages.
Labor & Installation Time
Time estimates depend on area size and depth. A small residential driveway may require 4–8 hours of crew time, while larger areas extend to several days. data-formula=”labor_hours × hourly_rate”> Typical crews run 2–4 workers for spread and compaction tasks.
Additional & Hidden Costs
Surprises often come from hauling challenges, weather-related delays, and site access. Some projects incur trailer or loader rental if equipment isn’t available on-site. Delivery minimums and off-load fees can add 50–150 dollars beyond the base material price.
Cost By Region
To illustrate regional differences, consider three common U.S. contexts. Northeast suburban sites may incur higher delivery surcharges but benefit from local quarries. Central urban sites frequently face constrained access and higher per-foot hauling rates. Rural areas often achieve lower unit prices but variable delivery windows.
Real-World Pricing Examples
Two to four scenarios reflect common project sizes and depths. Each includes parts lists, labor hours, unit prices, and totals to help with budgeting. Assumptions: standard driveway base depth 4 inches; 12×50 ft area for basic example.
Basic Scenario
Specifications: residential driveway base, light compaction. Hours: 4–6; Material: 10 tons; Delivery: 1-load distance under 20 miles. Total range: $340-$680.
Mid-Range Scenario
Specifications: driveable paths with better compaction and edging. Hours: 8–14; Material: 18 tons; Delivery: 1–2 loads up to 30 miles. Total range: $900-$1,900.
Premium Scenario
Specifications: heavy-duty driveway with high-traffic expectations and precise grading. Hours: 16–24; Material: 30 tons; Delivery: multiple loads >30 miles. Total range: $2,200-$3,800.
Assumptions: region, specs, labor hours.
Ways To Save
Shop regional quotes to compare delivery charges and bulk discounts. Consider ordering material in seasonally lower-demand windows to reduce costs. Proper planning, efficient site access, and avoiding unnecessary rework can reduce labor hours and bottom-line spend.
