Homeowners typically pay a modest installation cost for replacing a hose spigot, with the main drivers being device type, frost protection needs, and labor time. The price range reflects basic wall connections up to frost-free spigots and minor plumbing work. The cost and price variance mainly hinge on valve type, mounting depth, and whether a shutoff is required.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Spigot/Valve | $6 | $18 | $40 | Basic spigot vs frost-free model |
| Labor | $70 | $120 | $200 | DIY not included; hourly or flat rate |
| Materials & Parts | $5 | $15 | $30 | Sealants, adapters, pipe fittings |
| Permits & Codes | $0 | $25 | $60 | Typically not required for simple replacement |
| Disposal/Returnable Parts | $0 | $10 | $20 | Old valve, packaging, debris |
| Estimated Total Installed | $90 | $180 | $350 | Ranges based on frost-free option and access |
Assumptions: region, frost-free needs, wall access, and whether shutoff is present.
Overview Of Costs
Replacement costs vary by model and installation complexity. Typical total project ranges are $90-$350, with per-unit components $6-$40 for the valve and $70-$200 for labor. For a standard, non-frost-free spigot replaced with basic hardware, homeowners usually see the lower end of the range. If a frost-free version is chosen or access is challenging, totals trend toward the higher end.
Cost Breakdown
In a typical job, the main cost buckets are Materials, Labor, and Optional Permits or Extras.
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $5 | $15 | $30 | Basic valve, adapters, sealants |
| Labor | $70 | $120 | $200 | Hourly rates or fixed price; time 0.5–2 hours |
| Permits | $0 | $25 | $60 | Dependent on local rules |
| Delivery/Disposal | $0 | $10 | $20 | Packaging and waste handling |
| Warranty | $0 | $10 | $30 | Manufacturer warranty on valve |
| Taxes | $0 | $5 | $15 | Sales tax where applicable |
What Drives Price
Key price drivers include valve type (standard vs frost-free), installation access, and whether a shutoff valve is already present. Frost-free spigots are more expensive due to longer pipe runs and need for exterior backing plates. If the wall cavity requires new piping or relocation, costs increase further.
Ways To Save
Save by choosing a standard spigot and performing simple prep work yourself. Request quotes with the same scope from multiple plumbers and verify if they price by the job or by hour. Bundling parts with labor can reduce overall margins, and scheduling during off-peak seasons may yield lower labor rates.
Regional Price Differences
Prices vary by region due to labor markets and material availability. In the Northeast, frost-free replacements often add 15–25% to costs versus the Midwest, while the West may see similar or slightly higher rates driven by supply constraints.
Example deltas: Urban areas can be 10–20% higher than Rural equivalents; Suburban markets typically sit between urban and rural ranges.
Labor, Hours & Rates
Labor hours typically range from 0.5 to 2 hours depending on access and frost-free needs. Local hourly rates commonly span $60–$170 per hour, with some contractors offering fixed pricing for standard replacements.
Real-World Pricing Examples
Three scenario cards show typical job specs, hours, and totals to illustrate variance.
Basic Replacement
Spec: Standard hose spigot, no shutoff replacement, easy wall access. Labor time: 0.5–1 hour. Totals: $90–$140.
Assumptions: region, basic valve, simple access.
Mid-Range Replacement
Spec: Frost-free spigot, minor wall work, standard supply line. Labor time: 1–1.5 hours. Totals: $160–$240.
Assumptions: frost-free model and modest access adjustments.
Premium Replacement
Spec: Frost-free spigot with upgraded sealing, new shutoff valve, long run, limited access. Labor time: 1.5–2 hours. Totals: $260–$350.
Assumptions: complex install, extended run, potential wall repair.
