Homeowners typically pay for interior French door installation in the low thousands, with price influenced by door type, frame work, and labor. This article provides practical pricing in USD and clarifies the main cost drivers for a standard interior opening.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Doors | $300 | $600 | $1,200 | Prehung, hollow core to solid core options |
| Framing & Jamb Work | $150 | $400 | $1,000 | New or modified openings |
| Hardware & Thresholds | $50 | $150 | $350 | Handles, hinges, weatherstripping |
| Labor | $300 | $800 | $2,000 | Per door, including removal of old door |
| Permits/Inspections | $0 | $50 | $150 | Typically minimal for interior work |
| Delivery/Delivery Coordination | $0 | $60 | $150 | Includes scheduling |
Overview Of Costs
Cost for interior French door installation typically spans a range from roughly $1,000 to $4,000 per opening, depending on door type and site conditions. Price per door often breaks down as door unit plus trim, hardware, and labor, with per-door labor and materials varying by complexity.
Cost Breakdown
Below is a detailed breakdown of common cost components for interior French doors.
| Component | Low | Average | High | Notes | Assumptions |
|---|---|---|---|---|---|
| Materials | $300 | $600 | $1,200 | Door slab, frame, trim | Assumptions: hollow vs solid core, 72″ height, 60″ width pair |
| Labor | $300 | $800 | $2,000 | Removal, framing, hanging | Assumptions: standard double door, 1 opening |
| Hardware | $50 | $150 | $350 | Handles, hinges, strike | |
| Permits | $0 | $50 | $150 | Residential interior work | |
| Delivery/Disposal | $0 | $60 | $150 | Shipping or haul-away | |
| Contingency | $0 | $100 | $300 | Unforeseen framing or adjustments |
What Drives Price
Key price drivers include door material (hollow vs solid core, glass panels), door width and height, and any required jamb or rough opening modifications. Assumptions: standard 72″ height, 60″ wide pair; interior walls require minor framing work.
Factors That Affect Price
Site specifics matter: existing hardware, custom trim, and the need to reroute plumbing or electrical for nearby systems can add time and cost. Assumptions: no major structural work; typical single opening
Ways To Save
Cost-saving tips include selecting standard hollow-core doors, reusing existing trim where possible, and shopping for mid-range hardware. Assumptions: two standard interior doors, no heavy weatherproofing needs
Regional Price Differences
Prices vary by region due to labor markets and material availability. In the table below, three U.S. regions are compared with ±% deltas.
| Region | Low | Average | High | Notes |
|---|---|---|---|---|
| Coastal Metro | $1,200 | $2,600 | $4,000 | Higher labor rates |
| Midwest Suburban | $900 | $2,000 | $3,000 | Balanced pricing |
| Rural/Northern | $800 | $1,800 | $2,800 | Lower labor costs |
Assumptions: typical 72″ door height, standard 60″ pair, no exotic finishes.
Labor, Hours & Rates
Expect install times of 4–8 hours per opening depending on jamb condition and if adjustments are needed for square corners. Labor rates commonly range from $60–$120 per hour across regions. data-formula=”labor_hours × hourly_rate”>
Real-World Pricing Examples
Three scenario cards illustrate typical quotes from local installers.
| Scenario | Door Type | Hours | Per-Unit Price | Total | Notes |
|---|---|---|---|---|---|
| Basic | Hollow-core pair | 4 | $350 | $1,050 | Minimal trim; standard hinges |
| Mid-Range | Solid-core with partial glazing | 6 | $600 | $2,400 | Upgraded hardware |
| Premium | Custom wood with full glass | 8 | $1,000 | $4,000 | Detailed trim; premium threshold |
Assumptions: interior opening only; standard jettisoned existing trim replaced with matching profile.
Maintenance & Ownership Costs
Over time, maintenance costs are modest, mainly for hardware lubrication or weatherstripping replacement. Typical 5-year cost outlook remains under a few hundred dollars for routine upkeep. Assumptions: normal household use, no major damage
