Gas range cost includes appliance price, installation, and incidental fees. Typical price drivers include size, features, and labor time. This guide presents cost ranges in USD with practical estimates to help plan a kitchen upgrade.
Assumptions: region, specs, labor hours.
Overview Of Costs
Gas ranges are commonly priced from the mid hundreds to several thousand dollars, with higher-end models featuring dual ovens, convection, and professional-grade materials. Typical installed costs reflect a combination of the appliance price, professional installation, and any necessary gas line work or venting adjustments. Average installed pricing often includes standard delivery, hook-up, and basic vent piping.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Gas range price (appliance) | $450 | $1,200 | $3,000 | Entry to mid-range models |
| Installation and hookup | $150 | $400 | $1,200 | Gas line check, connector, per code |
| Venting adjustments | $100 | $300 | $650 | Range hood or ductwork if needed |
| Delivery | $0 | $80 | $200 | Regional and retailer dependent |
| Permits and inspections | $0 | $60 | $250 | Local requirements vary |
| Tax | $0 | $60 | $180 | Sales tax |
| Total installed price range | $650 | $2,100 | $5,480 | Typical range for Standard to Professional setups |
Cost Breakdown
Below is a practical breakdown of common cost components when purchasing and installing a gas range in a typical U.S. home. The table shows a mix of totals and per-unit estimates to help budget decisions.
| Materials | Labor | Equipment | Permits | Delivery/Disposal | Warranty | Overhead | Taxes |
|---|---|---|---|---|---|---|---|
| $450–$2,250 | $200–$900 | $0–$150 | $0–$250 | $0–$200 | $50–$200 | $50–$300 | $60–$180 |
data-formula=”labor_hours × hourly_rate”> A basic install typically uses 2–4 hours of skilled labor for a straightforward hookup, with longer times for re-routed gas lines or venting work. The range width reflects regional labor costs and whether additional equipment is needed (flexible gas line, shut-off valves, adapters).
What Drives Price
Several factors influence the overall cost of a gas range project. Core price drivers include range width (24″, 30″, 36″), number of ovens, convection features, and the presence of a continuous griddle or high-BTU burners. Installation complexity is affected by gas line distance, required venting, and whether a new island or cabinet cut is necessary.
Ways To Save
Smart budgeting can trim both appliance and installation costs. Shop during sales and compare models with essential features only. Consider a 30″ or 36″ model with standard convection rather than premium dual-fuel options if not needed. A basic professional hookup may be cheaper when the existing gas line and venting are already in place.
Regional Price Differences
Prices vary by region due to labor markets and supply availability. In the Northeast, expect higher installation fees due to stricter codes, while the Midwest can offer lower overall costs. The West may carry premiums for delivery and haul-away. Typical regional delta ranges are ±10–20% from national averages depending on local conditions.
Labor & Installation Time
Labor costs for gas range installation usually fall in the $150–$1,000 range, depending on the project. If gas line upgrades or hood vent adjustments are needed, hours can extend into the 4–8 hour window. Some jobs require a licensed plumber or gas fitter, which affects hourly pricing and permit needs.
Additional & Hidden Costs
Hidden or less obvious costs can influence total cost. Potential extras include old appliance removal, disposal fees, new gas shut-off valve parts, or upgrading the venting system. If local codes require a permit inspection, expect additional $50–$250 in fees. For condos or high-rise units, HVAC coordination can add complexity and cost.
Real-World Pricing Examples
Three scenario cards illustrate typical ranges with varying specs and labor inputs. Each card shows a package total and a per-unit measure when relevant.
Basic — 30″ single-oven gas range, standard installation, no venting changes. Specs: 4.5 cu ft, 16,000 BTU burner, no special features. Hours: 2–3. Total: $750–$1,150. Assumptions: urban area, standard delivery.
Mid-Range — 36″ dual-oven gas range with convection, modest venting adjustment. Specs: 6.0 cu ft, multiple high-BTU burners, electronic controls. Hours: 3–5. Total: $1,300–$2,600. Assumptions: suburban market, basic vent upgrade.
Premium — 36″ professional series with double ovens, heavy-duty construction, custom venting, and premium hood. Specs: 6.2 cu ft, sealed burners, smart controls. Hours: 4–8. Total: $3,000–$5,480. Assumptions: rural to urban mix, complex gas line work.
Note: all price ranges reflect installed costs and assume standard urban wiring or gas connections. Prices can vary with regional supplier pricing and labor availability.
