Homeowners and contractors often price 4000 psi concrete by the cubic yard to cover driveways, slabs, or footings. The main cost drivers include mix design, regional delivery rates, and added services such as pumping or color additives. This article presents current U.S. ranges for 4000 psi concrete per cubic yard and related fees to help budget accurately.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| 4000 psi concrete per cubic yard | $140 | $170 | $210 | Standard mix with Portland cement, aggregates, water; variability by region |
| Delivery fee (regional) | $60 | $120 | $180 | Fuel surcharge may apply |
| Minimum load fee | $0 | $0 | $50 | Some suppliers charge for small orders |
| Pumping or placing service | $75 | $150 | $225 | Per hour or per cubic yard, depending on setup |
| Tax | $0 | $0 | $20 | Depends on state and local tax rules |
Typical price range for 4000 psi concrete per cubic yard
Price spread reflects mix design, weather, and supplier margins. In the U.S., a common range is $140-$210 per cubic yard for the concrete itself, with $60-$180 for delivery or service fees. Assumptions: standard gray mix, normal access, weekday delivery, typical drum concrete suppliers.
Major cost components in a concrete quote
Concrete pricing breaks into key parts that affect total costs. The table below uses concrete by the cubic yard as the unit, with emphasis on concrete, delivery, and placement labor.
| Component | Low | Average | High | What drives it |
|---|---|---|---|---|
| Materials (4000 psi mix) | $140 | $170 | $210 | cement content, aggregate size, air entraining agents |
| Delivery / delivery surcharge | $60 | $120 | $180 | distance, fuel prices, access constraints |
| Placement labor / pumping | $75 | $150 | $225 | site access, slope, pump height |
| Taxes / permits | $0 | $0 | $20 | local rules, tax on materials |
| Minimum order or setup fee | $0 | $0 | $50 | contractor policy for small jobs |
| Waste disposal / clean-up | $0 | $0 | $10 | leftover concrete handling |
Assumptions: standard weather, no green or colored additives, typical 4,000 psi design strength required for residential slabs.
How regional factors alter the price per cubic yard
Regional differences can shift costs by noticeable margins. The Northeast and West Coast often see higher concrete and delivery rates than the Midwest or Southeast due to labor costs and logistics. A typical regional delta is ±15-25% from the national average. Contractors may add mileage surcharges in remote areas.
What adds to the 4000 psi concrete price per yard
Beyond the base mix, several add-ons affect the final bill. Color pigments, silica fume, or chemical admixtures tailor strength, workability, or finish. Delivery schedules, weekend or after-hours service, or pumping to elevated slabs can raise costs by 10-40%. Keep in mind location and access influence both price and timing.
Concrete mix specifics that change cost implications
4000 psi is a common structural standard, but the exact mix varies. A higher cement content or finer gravel may increase price slightly. Per cubic yard adjustments for performance enhancers or specialty finishes are priced individually, typically $10-$40 per cubic yard for colorants and $5-$15 per yard for water-reducing aids.
Delivery timing and its effect on price
Same-day or next-day deliveries can carry a premium. If the project spans multiple days or requires staggered pours, some suppliers offer bulk or block-rate pricing. Typical impact ranges from $20-$60 for scheduling to $60-$150 for expedited service.
Estimating totals for a typical residential driveway slab
A standard residential driveway uses a thickness around 4 inches and measures roughly 10 by 20 feet. That volume is about 2.22 cubic yards. At average concrete pricing, the material cost sits near $380-$520, with delivery and placement pushing the total to $650-$1,050. The final price depends on access, finishing method, and any additives.
Labor considerations and per-unit impact when applicable
For larger pours or commercial projects, labor rates are a meaningful portion of the price. If a crew charges $75-$125 per hour and pours at 2-3 cubic yards per hour, the labor could add $150-$375 per yard if placed in a multi-yard sequence. Planning a single pour can minimize labor overhead.
Three real-world quote examples with 4000 psi concrete per yard
- Residential slab, 2.5 yards, standard gray, no pigment: Materials $170, Delivery $120, Placing $180 — Total $470 for 2.5 yards
- Driveway extension, 8 yards, color-charged mix, weekday delivery: Materials $195, Delivery $140, Placing $320 — Total $655 per yard combined across 8 yards
- Commercial pad, 40 yards, high-flow admixture, pump to grade: Materials $180, Delivery $200, Pumping $1,200 — Total $2,100 per 10 yards equivalent
Ways to reduce costs without sacrificing structural integrity
To trim expenses, consider adjusting scope or timing. Options include reusing existing forms, scheduling midweek pours, selecting standard gray mix over specialty finishes, and coordinating multiple sections into a single pour to reduce setup time and mobilization fees. Evaluating pump vs. no-pump scenarios can also save or cost more depending on site access.
Regional comparison: pricing deltas you should expect
Across the U.S., 4000 psi concrete per cubic yard tends to follow regional cost patterns. The table highlights typical per-yard ranges by zone and notes the delivery surcharge that may apply in high-cost areas. This helps align bids with local market conditions.
| Region | Per Yard Range | Delivery Range | Notes |
|---|---|---|---|
| Northeast | $150-$210 | $60-$180 | Higher labor and logistics cost |
| Southeast | $140-$190 | $60-$150 | More competitive pricing on slab work |
| Midwest | $135-$185 | $60-$120 | Good access lowers transport fees |
| West | $145-$210 | $70-$180 | Remote markets may raise fuel surcharges |
Assumptions: typical residential and light commercial applications, standard finish, no specialty admixtures beyond basic water reducer.
