Prices for 4000 psi concrete vary by mix design, delivery, and project scope. This article highlights typical costs in USD, with clear ranges to help budgeting and decision making. The main cost drivers are materials, delivery, and labor for placement and finishing.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Concrete (4000 psi, per cubic yard) | $120 | $150 | $190 | Includes cement, aggregates, water; excludes tax |
| Delivery | $60 | $90 | $120 | Distance-based; typical 10–20 mile radius |
| Labor for placement & Finishing | $2.50 | $4.50 | $6.50 | Per sq ft for typical flatwork; includes screeding and finishing |
| Taxes, Permits, & Fees | $0 | $0–$1.50 | $3 | Depends on jurisdiction |
Overview Of Costs
Pricing for 4000 psi concrete typically ranges from $120 to $190 per cubic yard for the material, with delivery and placement adding $60 to $120 and $2.50 to $6.50 per square foot for labor, respectively. The exact total depends on mix design, additives, project size, and regional pricing. This section provides total project ranges and per-unit ranges with brief assumptions.
Cost Breakdown
Concrete projects involve multiple cost components, including materials, delivery, and labor for placement. A typical flatwork pour includes base materials (cement, aggregates), water, admixtures if needed, delivery, and finishing. The following table shows common components with approximate ranges and what drives each cost.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $120/yd³ | $150/yd³ | $190/yd³ | 4000 psi mix, typical Portland cement, aggregates |
| Delivery | $60 | $90 | $120 | Distance, access, and ramp fees affect price |
| Labor (placement) | $2.50/ft² | $4.50/ft² | $6.50/ft² | Includes finishing and initial curing guidance |
| Permits & Fees | $0 | $0–$1.50 | $3 | Local requirements vary |
| Taxes & Minor Add-Ons | $0 | $0–$1 | $2 | Color pigment, retarders, sealers as extras |
| Waste & Finishing Materials | $0 | $0–$1 | $2 | Forms, edging, control joints |
What Drives Price
Key drivers include concrete strength (psi), slab thickness, and finishing requirements, plus regional labor costs and aggregate supply. For 4,000 psi mixes, higher performance or specialized admixtures can push per-yard price higher. This section identifies the main factors that influence final costs.
Labor, Hours & Rates
Labor costs are often the largest variable for concrete pours. The rate depends on crew size, local wage levels, and whether forms, rebar, or decorative finishes are required. Typical installation times scale with slab size and complexity, with additional time for curing and sealing. This section covers typical hours and rate ranges.
Regional Price Differences
Prices vary by region and market conditions in the United States. Three representative areas show typical deltas relative to a national baseline, highlighting urban, suburban, and rural differences. Assumptions include standard 4-inch to 6-inch slabs on grade with basic finishing.
Labor & Installation Time
Installation time depends on slab size, site access, and jointing needs. A small residential slab may take a few hours of pour-time, while large drives or basements extend into multi-day projects. The table below uses hours and per-hour rates to illustrate total labor costs. data-formula=”labor_hours × hourly_rate”>
Additional & Hidden Costs
Hidden costs can affect final pricing beyond the base estimate. Examples include site cleanup, form removal, weather-related delays, and extra reinforcement or color additives. This section lists common extras and typical cost ranges to help prevent surprises.
Real-World Pricing Examples
Three scenario cards provide practical budget snapshots for 4000 psi concrete pours. Each scenario varies in scope, materials, and labor to reflect typical jobs in the U.S.
Scenario 1 — Basic Driveway Section
Specification: 4000 psi concrete, 4 inches thick, plain finish, standard jointing. Labor: 6 hours; Crew: 2 workers. Material: 6 yd³; Delivery: 1 load. Subtotal: ~ plus additives if needed. Total estimate: $1,200–$1,800. Assumptions: regional delivery within 20 miles; no rebar or coloring.
Scenario 2 — Small Patio Slab
Specification: 4000 psi, 4 inches thick, broom finish, basic formwork. Labor: 8 hours; Crew: 2 workers. Material: 3 yd³; Delivery: 1 load. Subtotal: ~$450–$700 material + delivery. Total estimate: $900–$1,500. Assumptions: minor site prep; no reinforcement beyond edging.
Scenario 3 — Residential Garage Floor
Specification: 4000 psi, 4 inches thick, polished or sealed finish, control joints. Labor: 14 hours; Crew: 3 workers. Material: 8 yd³; Delivery: 2 loads. Subtotal: ~$1,000–$1,400 material + delivery. Total estimate: $2,000–$3,500. Assumptions: rebar or welded wire, moisture protection, and curing requirements.
Assumptions: region, specs, labor hours.
