Typical cost for a 7-yard concrete pour varies by mix, site conditions, and added features. This guide breaks down the price drivers, provides practical ranges, and helps buyers budget accurately for a 7 cubic yard pour. Understanding per‑yard pricing and common extras keeps projects on track.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Concrete (7 cu yd) | $840 | $1,050 | $1,260 | Raw concrete price per cu yd typically $120-$180; may vary by mix and region |
| Delivery & Pumping | $150 | $350 | $1,050 | Regional delivery fees; pumping adds $0.10-$0.25 per cu yd |
| Reinforcement & Forms | $150 | $350 | $1,000 | Rebar, wire, edging, forms, tied to site prep |
| Site Prep & Groundwork | $100 | $350 | $1,000 | Excavation, grading, compaction |
| Finishing & Curing | $100 | $300 | $800 | Floats, broom finish, curing compounds |
| Permits & Fees | $0 | $50 | $200 | Depends on local rules; may be exempt for residential slabs |
| Taxes & Overhead | $40 | $100 | $200 | Includes general contractor overhead |
Overview Of Costs
Overall project ranges for a 7 cubic yard pour typically span low, average, and high scenarios. The lowest end assumes a basic mix, minimal site prep, and standard delivery. The middle reflects common residential pours with modest reinforcement and formwork. The high end covers complex site conditions, higher-strength concrete, long-distance delivery, and added finishing features. For most residential slabs, expect a total between roughly $1,200 and $3,000, with regional differences pushing higher in markets with limited concrete supply.
Cost Breakdown
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $840 | $1,050 | $1,260 | Concrete price varies by PSI, aggregate, and air entrainment |
| Labor | $320 | $750 | $1,200 | Pour crew, screeding, finishing; crew size depends on slab complexity |
| Equipment | $100 | $300 | $700 | Mixer use and pump rental if needed |
| Delivery/Disposal | $150 | $350 | $1,050 | Distance-driven charges or pump setup |
| Finishing & Curing | $100 | $300 | $800 | Finishing touches and curing compounds |
| Permits / Taxes | $0 | $50 | $200 | Local requirements may apply |
| Contingency | $0 | $0 | $300 | Unforeseen site conditions |
Assumptions: region, slab size, reinforcing, access, and labor rates.
What Drives Price
Key price drivers include concrete strength (psi), pour size, and access distance. Higher-strength mixes (e.g., 4,000 psi) cost more per yard. Large slabs incur more formwork and reinforcement, while restricted sites add handling time and pump rental. Distance to the batch plant and access for delivery trucks influence delivery charges. Seasonal demand can shift base rates by 5-15% in some markets.
Regional Price Differences
Prices vary by region due to labor markets and material sourcing. In the Midwest, 7 cubic yards may trend toward the lower end of the range; the West Coast can show higher delivery and permit costs. In urban cores, add-ons for street closures or permits may apply, while rural areas may offer lower delivery fees but longer wait times.
Assumptions: typical residential slab, standard reinforcement, local delivery within regional ramp.
Regional snapshot: Midwest generally 5-10% below national averages, West Coast 10-20% above, Rural areas near the national mid-point.
Labor, Hours & Rates
Pour timing affects cost. A typical 7-yard pour may take 2-4 crew hours on-site, plus setup and curing time. Labor rates range from $60-$110 per hour per worker in many markets, with a 2-4 person crew common for residential slabs. Pumping can add $150-$600 depending on lift height and distance.
Assumptions: crew of 2–4, standard slab, no complex finishing.
Real-World Pricing Examples
Basic Scenario
A simple residential slab, 7 cu yd, standard 3,000 psi concrete, no extra reinforcement beyond form edges, and local delivery within 15 miles.
Specs: 7 cu yd, standard finish, no pump rental.
Labor hours: 2–3; Pump: not required.
Totals: Concrete $840, Delivery $150, Labor $320, Forms $150, Finishing $100, Permits $0 — $1,560.
Mid-Range Scenario
Residential slab with light reinforcement, a 3,500 psi mix, and short-distance delivery with pumping needed for a drive approach.
Specs: 7 cu yd, reinforcement, broom finish.
Labor hours: 3–4; Pump: yes.
Totals: Materials $1,050, Delivery $350, Labor $750, Forms $250, Finishing $300, Permits $50 — $2,750.
Premium Scenario
Large, reinforced slab with elevated strength (4,000 psi), long distance delivery, and decorative finish or stamping.
Specs: 7 cu yd, heavy reinforcement, stamping, long pump reach.
Labor hours: 4–6; Pump: extended.
Totals: Materials $1,260, Delivery $600, Labor $1,000, Forms $400, Finishing $800, Permits $200 — $4,260.
Assumptions: region, specs, labor hours.
