Concrete costs per yard in Georgia typically vary by mix, strength, and delivery distance. Main cost drivers include the concrete grade, slump, project size, and local labor rates. The figures below reflect common ranges for residential and light commercial pours in Georgia.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Concrete cost per yard | $110 | $135 | $155 | Includes basic 4,000 psi mix; regional variations apply |
| Delivery fee | $70 | $100 | $180 | Distance and barrier access affect price |
| Labor for pouring & finishing | $1.00 | $1.50 | $2.00 | $/hour per worker; project size matters |
| Forms, setup & prep | $150 | $350 | $800 | Includes basic forms and site prep |
| Permits & inspections | $0 | $120 | $300 | Depends on jurisdiction in GA |
Typical Cost Range
Assumptions: region, mix strength, and project size; Georgia projects often require forms and compacting.
Concrete projects in Georgia usually run in ranges that reflect mix, distance, and labor. For a standard 4-inch slab, the per-yard price typically falls in the $110–$155 range, and total project costs can be $1,500–$4,500 depending on area and complexity. Prices can shift with weather, supply chain, and crew availability.
Cost Breakdown
| Category | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials | $110/yd | $135/yd | $155/yd | Concrete mix, strength options, air entrainment |
| Labor | $1.00/yd | $1.50/yd | $2.00/yd | Pouring, screeding, finishing |
| Equipment | $0.40/yd | $0.60/yd | $1.00/yd | Pumps, vibrators, saws |
| Delivery | $70 | $100 | $180 | Distance-based |
| Permits/Taxes | $0 | $120 | $300 | Jurisdiction dependent |
| Contingency | $50 | $100 | $250 | Unforeseen site issues |
data-formula=’material_cost + labor_cost + equipment_cost + delivery + permits + contingency’>
Factors That Affect Price
Concrete strength and mix design drive per-yard cost, with higher psi or air-entrained mixes command premium. In Georgia, 4,000–5,000 psi mixes are common for slabs, while thicker slabs or driveways may require higher strength or longer cure times, increasing material and labor needs. A second driver is delivery distance and access, which can add logistics charges or require multiple loads. Weather windows also affect scheduling and labor efficiency in the Southeast.
Ways To Save
Plan for off-peak scheduling in mild seasons to reduce crew rates and booking conflicts. Grouping projects or batching multiple pours can lower delivery and mobilization costs. Consider using standard forms and avoiding custom finishes when possible, and verify permit requirements early to avoid late fees.
Regional Price Differences
Georgia pricing can differ by market size and urban density. In metro areas like Atlanta, Georgia prices tend to be higher due to labor demand and traffic constraints, while rural counties may show lower delivery fees and sometimes simpler permitting. Expect about a 5–15% delta between urban and rural zones, with the largest gaps tied to access and project scale.
Labor & Installation Time
Pour duration depends on slab size, finishing method, and weather. A typical small residential slab of 300–600 sq ft may take 1–2 days with a crew, while larger slabs or complex finishes extend to several days. Labor hours per yard can influence overall cost significantly when crews must work overtime or into weekends.
Real-World Pricing Examples
Basic: 4-yard slab, 4,000 psi, standard finish, no extra features; 1 day, 2 workers; Total: $1,500–$2,000. Mid-Range: 6–8 yards, additional form work, light stamping option, 2–3 days; Total: $2,400–$4,000. Premium: 10+ yards, higher strength 5,000 psi, advanced finish, long delivery radius; Total: $4,000–$7,500.
Assumptions: project size, local permits, and access conditions.
Price At A Glance
For a typical Georgia residential slab, expect per-yard ranges around $110–$155 and total project costs in the $1,500–$7,500 band depending on size, finish, and access. Always obtain multiple quotes incorporating material type, delivery distance, and labor scope.
