Close board fencing prices reflect wood type, panel length, and installation effort. This article lays out typical cost ranges in dollars, with per-foot and per-job estimates to help buyers plan. The main drivers are materials, labor, fasteners, and site access. Cost transparency helps compare quotes and avoid surprises.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed residential fence, 6 ft tall | $20.00 | $28.00 | $40.00 | Includes materials, labor, and basic finishing |
| Per linear foot (board-on-board) | $18.00 | $25.00 | $32.00 | Gate and posts may adjust |
| Material cost per panel (6 ft wide) | $80.00 | $110.00 | $150.00 | Includes boards and rails |
| Labor for installation per hour | $40.00 | $60.00 | $85.00 | Regional variation applies |
| Post installation per post | $15.00 | $28.00 | $55.00 | Concrete set and alignment included |
Assumptions: Midwest labor rates, standard pine or treated lumber, normal yard access, standard gate width.
Close Board Fencing Price Breakdown by Major Cost Components
Prices split into Materials, Labor, and Posts/Hardware to show where most money goes. This view helps buyers adjust scope or material choices to fit a budget.
| Component | Low | Average | High | Notes |
|---|---|---|---|---|
| Materials (boards, rails, spacers) | $60.00 | $110.00 | $180.00 | Pressure-treated or stained options |
| Labor (installation crew) | $2,400.00 | $3,800.00 | $6,000.00 | Assumes 120–180 hours for 150–200 ft |
| Posts and hardware | $400.00 | $700.00 | $1,200.00 | Concrete, brackets, fasteners |
| Delivery/haul-away debris | $60.00 | $150.00 | $350.00 | Depends on access |
| Permits or inspections | $0.00 | $150.00 | $500.00 | Region dependent |
Key Cost Drivers That Alter Close Board Fence Quotes
Fence height, length, and post spacing directly shift material and labor needs. Thresholds: 6 ft vs 5 ft height; 20 ft vs 60 ft runs with 8 ft posts; ground slope requiring trenching.
| Driver | Typical Impact | Example | Notes |
|---|---|---|---|
| Fence length | Linear foot cost scales linearly | 200 ft vs 150 ft | Per-foot price may drop slightly at higher totals |
| Height and panel style | Higher heights increase boards and rails | 6 ft vs 4 ft | Stain finishing adds variance |
| Soil and access | Labor time rises with trenching needs | Rocky soil | May require different posts or equipment |
| Gate count | Gates add hinge hardware and framing | One 4 ft gate | Typically priced separately |
Prices vary by climate and market demand. Regions with higher labor costs or millable timber costs push the overall price up. Region examples: Northeast higher labor, Southeast lower lumber cost, West Coast variable permitting.
| Region | Low | Average | High | Notes |
|---|---|---|---|---|
| Northeast | $22.00 | $30.00 | $44.00 | Higher labor rates |
| Southeast | $18.00 | $26.00 | $38.00 | Common humidity-tolerant wood choices |
| Midwest | $20.00 | $28.00 | $40.00 | Balanced material costs |
| West | $21.00 | $29.00 | $42.00 | Access and transport influence |
Project scope shapes both labor hours and material choices. A straightforward install uses standard posts, no gates, and minimal prep. A scope that adds gravel, a gate, or decorative caps raises price. Assumes flat yard, standard access, and ready materials.
- Basic 150 ft, 6 ft high, no gate: low-to-average range
- 180 ft with one gate and 6 ft height: mid range
- 200 ft with decorative caps and stained boards: high range
Panel pricing helps independent budgeting for mid-size yards. Use per-foot pricing for quick quotes, then confirm by panel counts.
| Unit | Low | Average | High | Notes |
|---|---|---|---|---|
| Per linear foot (board-on-board) | $18.00 | $25.00 | $32.00 | Includes boards and rails |
| Per 6 ft panel | $80.00 | $110.00 | $150.00 | Standard 6 ft wide section |
Beyond basic fence, add-ons raise the cost. Consider gates, caps, staining, irrigation clearance, or soil stabilization. Budget for an extra 10–25% when including multiple add-ons.
- One gate installation
- Staining or sealing
- Concrete footings for heavy soil or slopes
- Removal of old fencing
Scope control and material choices drive savings. Opt for standard 6 ft panels, reuse existing posts when feasible, and compare regional quotes. Focus on daylight hours for scheduling and avoid peak-season demand.
- Limit decorative features to essential elements
- Choose pressure-treated lumber over premium hardwood
- Request bulk pricing on panels from a single supplier
- Bundle disposal, delivery, and installation in one quote
